In the thesis the process parameter optimization is tentatively studied.
本文尝试着对其进行运行参数优化。
You would use build process parameter settings to ensure that builds run quickly.
您应该使用建置流程参数设定，确保组建可以快速执行。
The PAN-SS membrane for different usage can be acquired by changing related process parameter.
调节有关制膜工艺参数即可获得特定用途的超滤分离膜。
The volume of flow is a process parameter which is often measured in fluid transmission systems.
在流体传动系统中，流量是需经常测量的过程参数之一。
Two-phase flow parameters measurement is a difficulty in field of industrial process parameter measurement.
两相流参数检测是工业过程参数检测的一个难点。
According to different plate width and rolling condition, process parameter such as rolling pressure are measured.
本文根据现场不同板宽、不同轧制条件情况，实测了轧制压力等工艺参数。
Carry out various methods to validate process parameter and promote product quality, and optimize production process.
能够运用各种方法进行制程参数的试验及确认，提升产品的品质与优化生产制程。
The production equipment and process parameter for producing heavy denier and mult-filament polyester fiber are described.
介绍了粗旦、多孔数涤纶长丝的生产设备和工艺参数。
The paper introduces the technological procedure and principle of instant rice production and offers the process parameter.
介绍了方便米饭生产的工艺流程及其原理，同时给出了各工段的工艺参数。
Selecting the optimized clearing process parameter and the suitable condition for the flax knitted yarn by the experiments.
通过清纱试验，探索出亚麻针织纱清纱的最佳工艺参数及适合条件。
Through measuring, the process parameter is as same as that of the world products and the process is proved to be feasible.
经器件验证，其参数均达到了国际同类型器件水平，从而证明本工艺的可行性。
The study has laid a base for material process parameter optimization, tool selection optimization and technics programming.
铣削加工有限元模拟研究为铝合金切削加工的工艺参数优化、刀具的优选和工艺规划奠定了基础。
Related process parameter, condition and characteristic of pretreatment of steel board in container production are introduced.
介绍了在集装箱生产中钢板预处理的有关工艺参数、条件和特性。
The qualitative and quantitative results may be used as a reference for process parameter adjustment in the newly built plant.
结果表明，研究获得的定性和定量两方面结果可供该厂在工艺参数调试中作参考。
The bonding strength is ensured by the correct choice of substrate material, surface preparation, adhesive and process parameter.
粘合强度可以通过选择正确的基体材料、表面处理、胶粘剂和工艺参数得以保证。
The paper presents THIOPAQ bio-desulfurization mechanism, bio-reactor structure feature, process parameter and application example.
介绍 THIOPAQ生物脱硫机理 ，生物反应器结构特点 ，工艺参数及应用实例。
Based on the said calculation and related analysis, process parameter optimization is done to expand product mix in terms of size range and variety.
通过计算分析，在现有顶管机的基础上进行工艺参数优化，可扩大机组生产的产品规格和品种。
Pilot test of dyeing and printing effluents treatment with baffled reactor was carried out to determine the process parameter and technical reliability.
对印染废水进行挡板式水解酸化实验，旨在探索工艺参数及该技术的可靠性。
This system consists of the common casting process parameter design module, the practical riser design module, the gating system design module, and soon.
系统主要功能包括：通用铸造工艺参数设计、实用冒口设计、浇注系统设计等。
This system consists of the machine tool parameter setting up, Cutting tool administration, POST-processing, and process parameter installation and so on.
本系统包括机床参数设置、刀具管理、后置处理、加工参数设置等内容。
BP neutral networks model has been established in order to predict process parameter of shear spinning based on many data accumulated during manufacturing.
以生产数据为学习样本，建立BP神经网络模型，实现对剪切旋压工艺参数的预测。
This article reviews the design principal of LPG treating unit and the selection of process parameter as well as the design of packing and sieve-plate tower.
本文综述了液化石油气处理装置的设计准则、工艺参数的选择以及填料塔、筛板塔的设计问题。
Through founding an expert database, the spraying process parameters are worked out and the initialization and control of spraying process parameter are realized.
通过建立专家数据库给出喷涂过程参数，实现了喷涂过程的参数初始化和控制。
The design principles of cip system, the selection of process parameter and system disposition in biological medicine production shop were described in this article.
综合阐述了生物制药车间c IP系统的设计原则、工艺控制参数和系统配置。
The reasonable selection of the process parameter has remarkable effects in the controlling of forging quality, increasing of the qualification rate and productivity.
工艺参数的合理选择对宏观控制锻件质量、提高锻件合格率、提高生产率效果显著。
Using explicit dynamic FEM as a solver, process parameter optimization design on laser bending of rectangular sheet metals was conducted with genetic algorithms (GA).
提出了一种以动态显式有限元为解算器，并采用遗传算法对矩形板激光弯曲成形工艺参数进行优化设计的方法。
Experimental investigations on the influence of both grinding process parameter and turning and dressing on the surface roughness of the ground workpiece are conducted.
本文对磨削工艺参数与砂轮修整轨迹对成形磨削表面粗糙度的影响进行实验研究。
Experimental investigations on the influence of both grinding process parameter and turning and dressing on the surface roughness of the ground workpiece are conducted.
本文对磨削工艺参数与砂轮修整轨迹对成形磨削表面粗糙度的影响进行实验研究。
应用推荐