Dr Hopkinson thinks Loughborough's process is already competitive with injection-moulding at production runs of around 1,000 items.
霍普金森博士认为，拉夫堡团队的喷注模具已经有一定的竞争力，它的生产量大约可达1000件。
Dr Hopkinson thinks Loughborough's process is already competitive with injection-moulding at production runs of around 1, 000 items.
Hopkinson博士认为，Loughborough的制作工序已经在约1000个产品的生产过程上与传统喷注成型方法可以一较高下了。
Moulding technology of specular seat is analyzed and the injection mold of this plastic part gets designed furthermore working process and key points of die design and manufacture are provided.
分析了镜座的成型工艺，设计了该塑件的注射模，并介绍了该模具的工作过程和模具的设计与制造要点。
The technological process, principles and the key points of technology controlling of the thermosetting plastic by using the fusible core injection moulding were described.
阐述了用可熔型芯注射成型热固性塑料的工艺过程和原理、工艺控制要点。
Owing to high requirement aesthetic perception for the open-faced cellphone lens, injection moulding was more preferably adopted instead of traditional cutting process.
直板薄型手机镜片的美观要求很高，最好采用注射成型的方法来代替传统的型材切割加工方法。
The application of the process aid LA-D in the injection moulding of pipe fittings was introduced.
介绍加工助剂LA -D在注塑管件加工中的应用，并从加工工艺的调节角度进行模拟试验。
The hybrid injection moulding will be one of the most important process technology of all plastic products.
混合注射成型技术将成为最重要的塑料制品加工工艺之一。
In this article shapes of parisons and blowing mandrels for injection blow mouldings were designed according to the shapes of finished articles and the feature of injection blow moulding process.
本文依据中空容器的结构特点及注射吹塑成型机成型工艺特点，设计注射吹塑用型坯及芯棒。
The plastic process character of chopstick basket is analyzed. Both the design key points of injection moulding mold of chopsticks basket and the working procedure of mold are introduced separately.
分析了筷笼的塑件工艺特点，介绍了筷笼注射成型模设计要点及模具的工作过程。
The filling phase of the injection moulding process greatly affects the quality of the end product.
在注塑过程中填充阶段对产品最后的成型的质量有着巨大的影响。
Shaped mould is the important part of extrusion die for injection moulding. The cooling process of shaped plastic in shaped mould was studied using numerical simulation.
定型模是挤出模具的重要组成部分，采用数值模拟方法研究定型模内塑料异型材的冷却过程，可以指导定型模冷却系统的设计。
This article introduces the technical conditions achieving the injection moulding saving spraying of plastic bezel in the whole process from the mould design to end-product.
论述从模具设计到成品加工过程中，实现省喷涂显示器前框塑料件的技术条件，并着重讨论了各工艺因素对产品质量的影响。
This article introduces the technical conditions achieving the injection moulding saving spraying of plastic bezel in the whole process from the mould design to end-product.
论述从模具设计到成品加工过程中，实现省喷涂显示器前框塑料件的技术条件，并着重讨论了各工艺因素对产品质量的影响。
应用推荐