The quick design process of electrode and the method of the avoiding deformation in reinforced electrode manufacture are introduced, the aim is to shorten the cycle of die manufacture.
介绍了电极的快速设计过程与防止薄筋电极加工时发生变形的方法，最终达到缩短模具制造周期的目的。
The mathematical process of polarization curve revealed that the fabrication technique of air electrode was steady and prone to bring high electrode performance.
极化曲线的数学处理表明，电极制备工艺稳定，重现性好。
This scheme not only eliminates the interference between main arc and pilot arc, but also reduces the deterioration of the tungsten electrode and improves the stability of welding process.
该方案不仅克服了传统方案存在的主维弧干涉现象，而且可大大降低钨电极的烧损，提高焊接过程的稳定性。
Through a combination of upper and lower engines, the electrode current in the smelting process is controlled to achieve the purpose of controlling the temperature of smelting furnace.
对铅锌矿冶炼厂生产作业进行自动化技术改造，通过上位机与下位机的有机结合，对精矿冶炼过程中的电极电流进行控制，实现熔炉温度控制，解决了传统手法可测不可控的难题。
A process for fabricating CuCrZr alloy spot-welding electrode by three cold extrusions is developed, with effect of cold deformation on alloy properties explored.
研究了用铜铬锆电极合金经三道工序冷挤压成点焊电极的工艺，还探讨了挤压冷变形对合金性能的影响。
The experimental results prove that the electrode reaction of Hesperidin is an irreversible two-electron electrode process.
实验证明橙皮甙的电极反应机理为双电子的不可逆过程。
To explore high efficient catalytic electrode materials is always the key process for the application of AEOP in organic pollutant degradation.
研制和开发高效催化电极材料一直是AEOP应用于难降解有机污染物处理的关键。
The process of dielectric breakdown in uneven electric field is analyzed and the influence of electrode polarity on gap breakdown is researched.
文中分析了在极不均匀电场下间隙的击穿过程，并用试验研究了微细加工时电极极性对间隙击穿电压的影响。
The characteristics of the electrode process and its effects on energy transfer efficiency and the heat sources of PEMFC were studied.
研究了PEMFC的电极过程特性以及对电池能量转化效率和热源的影响。
The study on the catalytic wave of organic compound plays an important role in increasing analytical sensitivity, and studying electrode process and chemical reaction kinetics.
开展有机催化波的研究可用于提高分析灵敏度、研究电极过程以及化学反应动力学。
Research of zinc-air battery in this thesis includes: optimum process of air electrode preparing, assembly of button cell, design and assembly of cylinder cell.
本文对锌空气电池进行了以下研究：空气电极的制作工艺优化、扣式电池的装配和圆柱型电池设计与装配。
The electro-pulse discharge process was verified by a set of pin-plane-pin electrode device.
通过“针—板—针”电极放电实验证实了上述串联脉冲放电过程。
The basic physical mechanisms of the electrode erosion process of high power gas switches were also studied.
研究了高功率气体火花开关电极烧蚀的基本物理过程。
This article has described the characteristic of the anti-oxidization coating on the side of graphite electrode used for EAF melting and its development process.
详细介绍了电炉炼钢用石墨电极柱侧面防氧化涂层的特点及开发过程。
The electrode reduction process of 2,4-dinitrophenol is irreversible with adsorptive characteristics.
结果表明，2，4-二硝基苯酚的电极过程为具有吸附性的不可逆过程。
We report on the contact process utilizing fritting phenomena between al electrode and probes made of tin or tin gold alloy.
我们曾经报告过利用铝电极和锡或锡合金探头之间的烧结现象来实现接触的过程。
In the refinery process, the key of influencing quality of melt and wasting of the electric power and efficiency is to control the electrode.
在电渣熔铸过程中，对熔铸质量、消耗的电能和生产效率影响最大的环节是对电极的控制。
Unless otherwise specified in other process documentation, one classification of electrode shall be used only on one weld.
除非在其它工艺文件中另有规定，否则一条焊缝只允许采用一种类别的焊条。
A new process involving ultrasonic separation of electrode materials, acid dissolution, precipitation of cobalt and lithium has been applied to recover metals values from spent lithium-ion batteries.
采用超声波分离电极材料-酸浸-钴锂沉淀新工艺分离并回收了废旧锂离子电池中的有价金属。
Properties and preparing process of tri layer films with Ag base coating, Ni electrodeposit, Sn Pb alloy for terminal electrode of multilayer chip inductor were described.
介绍了叠层片式电感三层端头电极即银基底电极、镍层、锡-铅合金镀层的性能及制备工艺。
The article analyses the influence to the generator electrode temperature from different inlet Angle and inlet total pressure and the compressive Angle of fluid in the situational process.
本文在对等离子发生器内部纯空气流场的模拟过程中，分析了不同进口气流角、不同进口总压以及不同气流压缩角对发生器电极壁面温度的影响。
In this paper, concept of staggered generating ratio has been put forward, the forming process has been analysed, the calculate equation of the electrode dimension has been given.
文中提出了交错展成比的概念，分析了成形过程，给出了电极尺寸计算公式。
The high nitrogen steels (HNS) were produced by plasma rotating electrode process (PREP), and the properties of HNS specimens were examined.
为了寻求高效、经济的高氮钢生产工艺，用等离子旋转电极工艺（PREP）生产高氮钢并测试了所生产的几种典型高氮钢的性能。
Extracting ion by electric extraction ionic method is a dynamic process, the extraction volume relates not only with extraction time but also with location of indicate extraction electrode.
电提取离子法在提取离子时是一个动态过程，提取量不但与提取时间有关，而且与指示电极的位置有关。
A new process of the bio-electrode rotating contactor (BERC) for denitrification was developed, and study was made for autotrophic denitrification by using hydrogen as electron donor.
采用旋转电极型生物反应器（B ERC）脱氮，对以氢气作为电子供体的自养反硝化进行了研究。
Reduction of bianthrone on electrode is an ECE process.
双葱酮的电化学还原是一个ECE过程。
First of all, this article tells of the EMA film electrode 'preparation process and the design of the whole cell, then explains the test systems and the test contents.
首先，本文讲述了EMA膜电极的制备过程和整个电池的设计，并对实验的测试系统和测试内容进行说明。
First of all, this article tells of the EMA film electrode 'preparation process and the design of the whole cell, then explains the test systems and the test contents.
首先，本文讲述了EMA膜电极的制备过程和整个电池的设计，并对实验的测试系统和测试内容进行说明。
应用推荐