Double crystallization peaks were also observed in the process of cooling.
在等速降低温度过程中还发现，共混物产生双结晶峰。
In the process of cooling of the HEJ the cold air is changed into hot blast and...
冷却用空气在冷却炉胆的过程中成为热风并被送入炉内实行热风操作。
It will been discussed that the influence of increasing the pressure of cooling medium on the weight loss in the process of cooling and freezing of food.
本文探讨了在食品的冷却与冻结过程中，提高冷却介质的压力对食品干耗的影响。
The mathematical models which calculate the distance of throwing steel and the moving time of brake plate in the process of cooling bed were given in this paper.
介绍了棒材上冷床过程中抛钢距离及裙板动作时间公式的推导与生产实际的验证。
During the process of cooling and thawing, embryos are subjected to a series of cryoinjuries such as cold shock, ice formation, cryoprotectant toxicity and osmotic effect.
超低温保存过程中所造成的冷冻损伤是制约鱼类胚胎超低温保存成功与否的关键，具体表现为渗透压影响、抗冻剂毒性、冰晶损伤等。
But the formulas involved in design process of cooling system are rather complicated, and their calculating quantity is also large. This paper affords a CAD system to all the above problems.
但冷却系统设计过程所涉及的公式较复杂，计算量较大，本文给出了一个CAD系统解决这些问题。
Nevertheless, as cooling and heating are merely two ends of the same process, it could save money and reduce carbon-dioxide emissions.
不过，由于冷却和加热仅仅只是同一过程的两个结果而已，因此其同样也可以降低成本并减少二氧化碳的排放量。
Update: There's no evidence of any radioactive leakage, but officials have confirmed that the cooling process for the nuclear plant has not yet gone according to plan.
更新：现在还无法证明有辐射泄漏，但官方已经确认核电站的冷却程序没有按照设定的工作。
Most of that goes into the boiling and cooling process, which is similar to making beer.
绝大部分水用在蒸馏和冷却环节上，这和造啤酒很相似。
At a climate conference in St. Petersburg in 2007, Sergei Mironov, the speaker of the upper house of parliament, told experts that a process of "global cooling" was in fact taking place.
在2007年于圣彼得堡举行的气候会议上，上议院发言人SergeiMiron ov向专家表示，事实上“全球变冷”的过程正在取代全球变暖。
But with each collision, the photons slowly assumed the temperature of the pigment molecules, cooling one another to room temperature without being lost in the process.
而每经过一次碰撞，光子的温度会慢慢地趋近于色素分子的温度，进而降温至室温，而且光子在这一过程中不会消失。
The collision would have taken place during the late stages of the theoretical proto-moons' cooling process.
碰撞有可能发生在理论上存在的两个“原月亮”冷却的最后阶段。
On the basis of numerical simulation of cooling process, we select GA to solve the problem.
在冷却过程数值模拟的基础上，采用遗传算法对该问题进行求解。
Reciprocating compressors can produce the work a lot of heat, so in working circulation cooling process between need to set.
往复式压缩机工作时会产生大量的热，因此在工作循环之间需要设定冷却过程。
QUENCHING: The process of rapid cooling from an elevated temperature. The product is placed in contact with liquids or gases, usually oil, water, or air.
淬火：指从某一高温快速冷却的过程。产品被放置于液体或气体中接触，通常是油，水或者空气。
Air cooling process will have a lot of water (oil) condensation out, after the separator is isolated.
空气冷却过程将有大量的水(油)蒸气凝结出来，经过分离器使之分离出来。
The welding process of the welding workpieces, uneven heating process is partial and uneven cooling process.
焊接过程对被焊工件来说，是局部的不均匀加热过程和不均匀冷却过程。
During the producing process of slab caster, secondary cooling system is a very important factor which influences slab quality.
在板坯铸机的生产过程中，二次冷却制度是影响铸坯质量的重要因素。
Bearing parts in the process of hardening cooling by internal stress due to the formation of quenching cracks crack said.
轴承零件在淬火冷却过程中因内应力所形成的裂纹称淬火裂纹。
The fast cooling technology of steam turbine is the process that the cooling medium is used to accelerate the temperature reduction of cylinder and rotor after the shutdown of turbogenerator.
汽轮机快速冷却技术是在汽轮机组停运后，向汽轮机内部通以适量的较低温度的冷却介质，进行强迫对流换热，加快汽缸和转子温降速度的过程。
The existing cooling ability of bloom continuous casting mold at PZH Steel was evaluated, then, the mold cooling process was optimized.
在分析攀钢大方坯连铸现行结晶器冷却能力的基础上，优化调整了结晶器冷却制度。
Hardening. This is the process of heating to a temperature above the critical range, and cooling rapidly enough through the critical range to appreciably harden the steel.
淬火。这个工艺是把材料加热到临界温度范围之上，然后迅速冷却到临界温度范围以下，使钢材明显变硬。
Air conditioning, or cooling, is really a process of removing heat from an object (like air).
空调，或者制冷系统的工作，实际上是把热量从某种物体(例如空气)中带走的过程。
Based on the analysis on cooling process of stator, basic assumption and boundary condition are presented.
通过对定子冷却的分析，提出了计算的基本假设和边界条件。
The process of annealing consists of heating the steel to an elevated temperature for a definite period of time and, usually, cooling it slowly.
退火工艺的组成为把钢加热到一定温度并保持一段时间，通常再缓慢冷却。
The process of local heating and local cooling on cylinder billet is analyzed by the ANSYS software.
运用AN SYS软件对圆柱体坯料局部加热和局部冷却过程进行了热分析。
The process of local heating and local cooling on cylinder billet is analyzed by the ANSYS software.
运用AN SYS软件对圆柱体坯料局部加热和局部冷却过程进行了热分析。
应用推荐