In 2005, a postdoctoral researcher in his laboratory developed a water annealing process, reconstituting the silks slowly in a humid environment.
2005年，他实验室的一位博士后研究员利用一种水退火过程在潮湿环境下对丝类进行了缓慢的重组。
This process is known as full annealing because it wipes out all trace of previous structure, refines the crystalline structure, and softens the metal.
这过程被称为完全退火，因为它去除了以前组织结构的所有痕迹、细化晶粒并软化金属。
The process of annealing consists of heating the steel to an elevated temperature for a definite period of time and, usually, cooling it slowly.
退火工艺的组成为把钢加热到一定温度并保持一段时间，通常再缓慢冷却。
By warm rolling after hot rolling or cold rolling after annealing in process and stabilizing annealing in some temperature condition, the c.
采用热轧后温轧或中间退火后冷轧，再在一定温度下进行稳定化退火的工艺，可以获得综合性能良好的铝-镁-钪合金冷轧板材。
The middle annealing process can change the strength of cable foil, improve its elongation, reduce its anisotropy, and it's advantageous to the compound of aluminium foil.
中间退火工艺能改变电缆箔强度指标，提高其延伸率，减小各向异性，有利于铝箔的复合。
The heat treatment process comprises annealing, hardening and tempering.
热处理过程包括：退火、淬火与回火。
As a thermal oxidation procedure, the annealing treatment is not only a crystallization process but also an oxidation process.
作为一道热氧化工序，退火处理不仅是一个氧化过程，而且是一个结晶过程。
In addition, the annealing process of SiC films is mostly carried out in vacuum, argon gas or nitrogen gas ambience.
另外，对碳化硅薄膜的退火处理大多是在真空、空气、氩气或氮气气氛下进行。
Relatively low ordering temperature for the multilayer is due to the extra driving force of ordering process caused by the vanishing of the multilayer interface at annealing.
多层膜化促进有序化在较低的温度下进行，这是由于热处理过程中多层膜界面的消失提供了有序化过程额外的驱动力。
The temperature and thermal stresses are important parameters in the process of bell type annealing.
温度和热应力是罩式退火过程中的两个重要参数。
Wafer pairs with bonding interface being native oxide or thermal oxide have different bonding behavior in the annealing process, which were investigated and compared.
将硅本征氧化层与硅热氧化层两种键合界面在退火过程中的行为进行了理论分析与比较。
The alloying annealing process of zinc layer is also described.
并对锌层合金化退火工艺进行了阐述。
In the production process, hot metals chemical composition, heating and coiling temperatures and continuous annealing conditions while being rolled, will affect properties of tin-plates.
生产过程中，炼钢的化学成分、热轧的加热与卷取温度及连续退火的工艺条件都会对镀锡板的性能产生影响。
It also proves that simulated annealing algorithms are feasible and practicable in optimization of mixed refrigerant LNG process.
证明模拟退火算法应用于混合制冷循环天然气流程的可行性和有效性。
The stainless steel annealing and pickling process can product large quantity of waste mixed acid(HF/HNO3) that must be treated through acid purification system.
不锈钢生产退火酸洗过程会产生大量废混酸（HF/HNO3），通过酸净化系统对废酸进行处理。
During the process of optimization, chaos simulated annealing was realized by decaying the amplitude of the chaos noise and the probability of accepting continuously.
在寻优过程中，通过不断衰减混沌扰动幅度及混沌扰动的接受概率来实现混沌的模拟退火。
The process of annealing is studied according to the need of exceed high pressure gas discharge lamp.
结合超高压气体放电光源的要求，对玻壳精密退火工艺进行研究。
Approach is done into the problems in process of annealing of raw material and semi-products and of quenching of finished products for manufacturing of card wires.
探讨了针布齿条热处理中原材料、半成品退火处理、成品的淬火处理的各种问题，同时提出了解决方法，以供同行参。
The affection of different annealing process conditions on TiN film stress is also researched, low temperature annealing of film can be realized.
论文还研究了不同退火工艺条件对薄膜应力的影响，可以实现薄膜低温退火。
The effect of batch annealing process on the microstructure and mechanical properties of SPCCSD cold rolled steel sheet was studied under laboratory conditions.
在实验室条件下，研究了罩式退火工艺对SPCC- SD冷轧板组织和性能的影响。
In continuous annealing process, strip tension is an important factor that decides whether the continuous annealing line works steadily and promptly or not.
在带钢连续退火过程中，带钢张力的波动是造成带钢产品质量下降及制约连续退火机组高速运行的重要原因。
The annealing process of centrifugal ductile cast iron pipe by the heated mould method is studied.
研究了热模法离心铸造球铁管的退火工艺。
For the whole process of annealing, the leading factor for the change of activity of the al alloy anode was the change of crystal defects.
整个退火过程中，晶体缺陷的变化对铝阳极活性改变影响最大。
For the whole process of homogenizing annealing, the leading factor for the change of Al-alloy-anode's activation properties is the change of crystal defects.
整个退火过程中，晶体缺陷的变化对铝合金阳极活性改变影响最大。
For the whole process of homogenizing annealing, the leading factor for the change of Al-alloy-anode's activation properties is the change of crystal defects.
整个退火过程中，晶体缺陷的变化对铝合金阳极活性改变影响最大。
应用推荐