Die-casting machine is the important equipment used to process alloy castings with complex shapes.
压铸机是加工外形复杂的合金铸件的重要设备。
A process called hysteresis causes some of the heat energy to be lost, but this new alloy has a low hysteresis, the researchers say.
研究人员说，一种叫做磁滞的过程会引起热能损失，但这种新合金具有低磁滞特性。
Steel is an alloy of iron and carbon. Coking coal is a source of carbon in the smelting process.
钢是铁与碳的合金，焦煤便是熔炼过程中碳的来源。
The properties and service life of the materials depend on the alloy design and process design.
而材料性能、寿命的好坏取决于其合金设计和工艺设计的优劣。
Electroplating: use the principle of electrolysis, the metal and alloy parts deposition in the surface, form even, density, good adhesion of the metal layer process.
电镀：利用电解原理，使金属或合金沉积在制件表面，形成均匀、致密、结合力良好的金属层的过程。
This paper introduces a new chemical colouring technology for copper and its alloy surface to colour a Verde green with respect to technical process, prescription, quality control and so forth.
从工艺流程、配方、质量影响因素等方面，介绍一种在铜及其合金表面着自然铜绿的化学着色新工艺。
We also present effective control measures for the problems such as flammability and big transformation in magnesium alloy welding process.
对镁合金焊接过程中易燃烧、焊接变形大等问题提出了有效的控制措施。
Process formula and operation steps of magnesium alloy surface alloying were discussed.
讨论了镁合金表面合金化的工艺配方及其操作步骤。
HEAT TREAT: Process used on most alloy steels to provide desired metallurgical properties and to put them in the most suitable condition for machining or other subsequent operations.
热处理：用于使大多数合金钢产生期望的金相组织特性并把这些组织处于为机加工或者后道工艺最适宜的状态的一种工艺。
With the fabricated preforms, the pressure casting process of porous aluminum alloy was studied.
利用所制备的预制块，研究了多孔铝合金的加压铸造工艺。
It is particularly important that find out the influence of metal element on the alloy. So, the research on the precipitate process is urgent.
所以，搞清楚金属元素对合金的作用显得尤为重要，对其所形成沉淀相的研究也显得尤为迫切。
The drawing difficulty is settled by adopting small draught and multi-pass drawing process, reducing the thickness of Zn-Fe alloy and using artificial aging process actively.
通过采用小压缩率多道次拉拔工艺，减少锌-铁合金的厚度，积极采用人工时效工艺等解决了拉拔困难的问题。
The process flows of magnesium alloy surface alloying and electrophoretic coating were introduced.
介绍了镁合金表面合金化及电泳涂装工艺流程。
The coating behavior of aluminum alloy lost foam casting ( LFC) process has been investigated.
研究了铝合金消失模铸造过程中的涂料行为。
The property, production process and application of hot galvanizing alloy plates are introduced.
介绍了热镀锌合金钢板的性能、生产过程和应用情况。
Hydrogen brittleness: because, in addition to the erosion oil or plating process such as metal and alloy hydrogen atom absorption and cause brittle.
氢脆：由于浸蚀，除油或电镀等过程中金属或合金吸收氢原子而引起的脆性。
Electroplating is to use the principle of electrolysis in some metal surface plating a thin layer of the other metal and alloy process.
电镀就是利用电解原理在某些金属表面上镀上一薄层其它金属或合金的过程。
The ingot alloy quality and casting process influence directly the casting metallurgy quality.
精铸合金锭的质量及铸件铸造工艺直接影响铸件冶金质量。
The paper introduces the welding procedure and fabrication process of titanium alloy wheel, indicates the inspection method and quality result of welding location.
介绍了钛制叶轮的焊接工艺和制造过程，说明了焊接部位的检查方法及检查结果。
The heat treatment process of 7005 alloy is studied in terms of mechanical properties and resistance to stress corrosion test.
通过力学性能以及抗应力腐蚀的测定，对7005铝合金的热处理工艺进行了研究。
In order to study the fracture mechanism of IC6 superalloy, the tensile process of alloy was observed by back scatter image in situ.
为了研究IC6合金的断裂机制，用背散射电子图像原值观察该合金的动态拉伸过程。
In regard to non wear resistance of the white iron shot in the practical application process, alloy iron shot have been produced by means of adding alloying element and proper heat treatment.
针对白口铁丸在实际应用过程中不耐磨易破碎的现象，在白口铸铁中通过添加合金元素及适当热处理等手段生产合金铁丸。
The paper described the melting process, the mechanical properties of TEGOSTAR738 alloy and the centrifugal casting process.
以TEGOSTAR738锡基巴氏合金为例，阐述了对其熔炼过程及室温力学性能要求；
It is an important method which improve the welding quality by tested and controlled aluminum alloy MIG welding process dynamically.
铝合金MIG焊接过程动态检测与控制是提高焊接质量的重要手段。
The microstructure deformation in the aging process of the alloy has been stated, and the heteromorphy has been found the cause of the natural aging process of the 2011 alloy.
分析了工艺参数对合金力学性能的影响，阐述了合金时效过程中的微观组织变化，找出了2011合金自然时效进程缓慢的原因是异质形核。
The melting loss has relations with size of melting bath, oxidation film property of melting charge, melting process and melting operation, etc, during melting aluminium alloy in reflecting frunace.
反射炉熔炼铝合金时，熔损与熔池几何尺寸、熔体氧化膜性质、熔炼工艺及操作等因素有关。
The melting loss has relations with size of melting bath, oxidation film property of melting charge, melting process and melting operation, etc, during melting aluminium alloy in reflecting frunace.
反射炉熔炼铝合金时，熔损与熔池几何尺寸、熔体氧化膜性质、熔炼工艺及操作等因素有关。
应用推荐