Major factors leading to oil flow away are high pressure injection and unbalance of injection and production.
导致原油外流的主要因素是高压注水和注采不平衡引起的。
Application: It's used to anchor oil pipe and used for high pressure injection, fracturing and other construction.
用途：液压水力锚适用于锚定油管，用于高压分注、分层压裂等措施施工。
Objective To report the treatment procedures and their outcomes in high-pressure injection injuries to the hand in 6 cases.
目的报告6例手部高压注射伤的治疗方法与效果。
Unplanned power changes can result in transients, initiating ones. Then you have emergency AC power, high pressure injection systems.
无计划的动力改变能够引起瞬变，初始的，然后你们会有紧急的AC动力，高压的注入系统。
This method was applied to the optimization of operation plan for high-pressure injection system of an oilfield. A great economic benefit has been gained.
运用该方法对某油田高压注水系统运行方案进行了优化计算，取得了良好的经济效益。
Objective: To discuss the clinic effect on the treatment of hemiparalysis patients in a mode of the carotid artery pressure injection of Tankangling (TKL).
目的：探讨颈动脉加压注射瘫康灵治疗偏瘫患者的临床疗效。
Methods: By using a patent high -pressure injection promoter combined with disposable syringe, intralesional injection of Compound Betamethasone had been used to treat keloid lesions.
方法：采用专利产品高压助推器与一次性注射器相结合，于瘢痕内注射“得宝松”进行治疗瘢痕疙瘩并有效的防止其复发。
And we have, if you will, a low pressure injection system that will also provide water into the core for low pressure. And we have boron that's capable of being inserted as well, as needed.
如果你们可以，一个低压力的加入系统，会给低压力的核心提供水，我们还有硼，它也是可以，被加入的，也是需要的。
This injection well perforation parameter prediction theoretical method provides a new way to improve poor formation's water absorbing capability and mitigate over fracture pressure injection.
运用此项研究得出的一套注水井射孔完井参数预测的理论方法，为提高差油层的吸水能力、减轻油层超破压注水提供了新思路。
We also now have a high pressure safety injection system that will inject water into the core from the refuelling water storage tank.
我们现在也有一个高压力的安全加入系统，那会将水加入到核心里去，从加料储水箱里。
This system is used to pump water into the core, low pressure safety injection and high pressure safety injection.
这个系统是用来将水抽到核心里去，降低压力安全加入和高压力，安全加入。
And you do have a high pressure coolant injection system that could also be called in to address breaks that perhaps are not as a large as a main LOCA.
你有一个高压的冷却剂注入系统，也也能使用来处理，破裂，破裂可能不和一个失水事故一样大。
The molder must recognize the dangers of excessive fill speed, insufficient injection pressure, excessive melt temperature, and inadequate packing.
注塑工必须认识过快填充速度、不足注塑压力、过高融化温度和不充分挤压的危害性。
As a result, it was found that injection speed could be increased through varying nozzle port opening width under keeping constant injection pressure.
实验结果表明，在压力恒定的条件下，可通过控制喷嘴开启量大小获得不同的注射充填速度。
The active systems consist of several pumping systems of varying discharge pressure and flow rates, e. g., high head injection system, low head injection system.
能动系统由不同注入压力和流量的泵系统组成，如高压安注系统，低压安注系统。
The top of the lubricator assembly includes a high-pressure grease-injection section and sealing elements.
防喷管组合的上部包括一个高压的润滑脂注入部分和密封元件。
Both the shop experiment and field test showed that the wettability alteration agents have the ability to reduce the injection pressure and enhance oil recovery.
室内实验和矿场试验都说明，润湿性反转剂具有降压增注和提高原油采收率的效果。
Multi step adjustment of injection speed or pressure.
多级压力、多级速度射胶调整。
Injection pressure in one of the major factors effecting the results of development of sandstone reservoirs.
注水开发的砂岩油田，注水压力的高低对油田开发效果有很大的影响。
There are three parameters of fuel injection system: response pressure, injection-advanced angle, injection valve bulge high degree, the best match was found by adjusting them.
对于喷油系统参数：喷油压力、静态供油提前角和油嘴凸出高度，三个参数进行调整试验，找到它们的最佳匹配。
An effective comprehensively broken down works have been implemented aimed to increasing production and decreasing pressure to the contradiction caused by dual high water injection in Erlian oilfield.
二连油田针对“双高注水”产生的一系列矛盾有效开展了以“提液降压”为主的油田综合治理工作。
Cycle polymer flooding method can reduce injection pressure.
周期注聚方式可以降低注入压力。
Anew forecasting method of wellhead injection pressure for polymer flooding is established based on Dupuit formula.
依据裘比公式建立了一种新的聚合物驱油井口注入压力预测方法。
Commonly used methods to evaluate the injectability included testing injectability coefficient, pushing force and injection pressure.
常用的注射性能评价方法包括测定注射能力系数、推力和注射压力三种。
The mechanical property of HDPE is studied using a self-made pressure vibration injection device.
采用自行研制的压力振动注射装置对HDPE进行了力学性能的研究。
Result Clay stabilizer prelimiarily treats the formation of injection wells, controls efficiently the pressure of injection wells, preserves the permeability of the formation.
结果：粘土稳定剂对注水井地层提前进行预处理，使注水井压力得到了有效的控制，保持了地层原有的渗透性。
Due to high injection pressure of high concentration polymer solution, reducing injection pressure of high-concentration polymer solution with surfactant has been researched.
针对高浓度聚合物溶液注入压力高的实际情况，开展了表面活性剂降低高浓度聚合物注入压力的研究。
Due to high injection pressure of high concentration polymer solution, reducing injection pressure of high-concentration polymer solution with surfactant has been researched.
针对高浓度聚合物溶液注入压力高的实际情况，开展了表面活性剂降低高浓度聚合物注入压力的研究。
应用推荐