So our usual phase diagram here with temperature on this axis here and pressure on this axis here, and we've got our triple point sitting here.
我们通常的相图是这样，这个轴是温度轴，这个轴是压强轴，这里是三相点。
In operation, the motor structure operates as a linear motor, causing radiating surface 14 to vibrate along a axis of motion 22 (hereinafter "axis"), radiating pressure waves.
在运行中，马达结构作为线性马达工作，使辐射表面14沿着运动轴线22(下文中称为“轴线”)振动，辐射压力波。
First of all, for strength and stability, mainly a cylinder, cover the wall, the water pressure check and impeller stress test, the axis of strength checking.
首先进行强度和稳定性计算，主要进行了筒体、端盖的壁厚计算、水压试验应力校核以及叶轮、轴的强度校核。
And, the southward moved axis of monsoon trough today passes through Bikaner, Deesa, Jabalpur, Raipur, Center of low pressure area.
而且，季风槽向南移动轴的今天经过比卡内尔，迪萨，贾巴尔普尔，赖布尔，低压区中心。
Power and non power shaft bend and adjust the pressure, and together with the roller disk axis deviation have been reflected in the design.
动力和非动力轴的弯度和调整压力，以及连同滚筒盘中的轴的偏差在设计中都得到体现。
According to the different motor ignition states, a series of total pressure values of observed points on the respective jet axis distances was measured.
针对不同的发动机点火状态，在射流轴线的不同距离上对一系列测点位置的总压参数进行了测量。
Method Mud invasion process is simulated with conventional three axis rock strength test device under same downhole pressure and temperature.
方法采用常规三轴岩石强度试验装置，进行井下温度压力条件下的泥浆侵入过程模拟试验。
Welding machine by high performance of pneumatic components, the dominant shaft and the direction for all use chrome axis light circle, transfer pressure flexible, no reliable absent produce.
焊机采用高性能气动元件，主导轴及导向轴均采用镀铬光圆，传递压力灵活可靠，无虚位产生。
Regulatory axis error correction function of size, saving the operator time to correct machine. With a bending power reference value of pressure.
规轴误差尺寸校正功能，节省操作人员校正机床的时间。具有折曲压力参考值功。
From the Angle of relative equilibrium, the paper analysis the reason of the formation of the additional pressure on the axis of fixed-point rotation of rigid body.
从相对平衡的角度分析了刚体定轴转动轴上附加压力产生的原因以及实现自由转动的条件。
In this paper a calculation method of the straightening stroke is proposed for the automatic pressure straightening of axis, and a corresponding MATLAB program is designed.
提出一种用于轴类零件自动压力校直压下量计算的方法，编制了相应的MATLAB计算程序。
The axis of thin shell arch is selected coincidence with the pressure line, the stress inside the arch is controled by pressure stress.
选择薄壳拱的轴线与压力线相吻合，拱内应力主要由压应力控制。
Results The rotational alignment of the femoral components paralleled to the transepicondylar axis had the best results of the peak value of the patellofemoral contact pressure(P< 0. 05).
结果当股骨假体的旋转与经股骨上髁轴平行时，测得的髌股关节峰值接触压结果最优（P< 0．05）。
Magnetic axis to ensure there is enough pressure to maintain its solid connection so that you can divide the next spin.
可以保证电磁轴有足够的压力，保持其连接稳固，这样就可以旋下隔膜。
And then up into the swirl around the axis, the wind always Tornado of the cyclone, its central pressure than the surrounding air pressure low 10 percent.
并随即变为绕轴心向上的涡流，龙卷中的风总是气旋性的，其中心的气压可以比周围气压低百分之十。
Imported pneumatic components, linear motion axis unit, to ensure uniform pressure force force plane in the box.
采用进口气动元件，光轴直线运动单元，保证压合力在盒面均匀受力。
One conclusion is discovered; the lengthening of the axis of the pressure cavity can prolong the life of the FAI fuel unit.
在试验中也意外发现在压力腔设计上，其轴向尺寸越大，工作寿命就越长。
An example shows that the long axis of the casing pressure figure directs to the minimum principal compression stress.
应用实例表明，套管径向压力载荷图形的长轴指向地应力场的最小主压应力方向。
The outlet (21) can be widened in a variable manner by lateral pressure on circumferential points (12) in the region of the longitudinal axis of the oval face (20).
通过在卵形表面(20)的纵向轴线的区域的圆周点(12)上施加侧向压力，出口(21)可被打开到可变宽度。
The pressure under cap, axis force along pile and deformation of foundation were obtained from these tests.
通过埋设测试元件对承台土反力、桩身轴力及复合地基变形等进行了量测。
Finally, the selection of underground power house axis and the lining design scheme for the pressure tunnel are discussed based on the in-situ stress.
最后从地应力角度，讨论地下厂房的轴线选择和高压隧洞衬砌设计方案。
The peak pressure attenuation of shock in water in borehole axis direction was slower than the direction vertical to the borehole axis.
水中冲击波压力峰值在炮孔轴线上衰减比垂直于炮孔轴线向上衰减慢。
Using magnetic fluid dynamics and thermodynamics theory, a study on the results of axial bearing pressure ability of rotation axis magnetic fluid static seals was introduced.
介绍了利用磁流体动力学、热力学理论，研究旋转轴磁流体静密封轴向承压能力的结果。
This paper introduces the design of sample axis in the process of machining axis spare parts with hydraulic pressure copying lathe.
本文介绍了液压仿形车床在加工轴类零件过程中样轴的设计方法。
It is shown that Although the deformation curve under the pressure of axis is well consistent between micro-concrete and normal-concrete, the elastic ratio and strength are different.
试验表明，虽然微粒混凝土和原型混凝土的轴心受压变形曲线是大体“相似”，但两者的弹模和强度存在差异。
The six-axis filament winding machine was applied to five-axis filament winding of pressure vessel and the filament winding of tee shape fitting.
并将六轴缠绕机应用到了压力容器的五坐标缠绕和三通管的缠绕中。
Then, the experiment of flow separation in the nozzle was done with a solid rocket motor, and the inside pressure data along the axis of the nozzle was gotten.
然后，利用某型号固体火箭发动机进行喷管分离流试验，测得了喷管壁面上沿轴向的压强分布数据。
The G5 Series provides additional Z-Axis adjustment of the focus lens cell to compensate for varying High-Pressure Optic Thickness.
G5系列提供额外的Z轴的焦点透镜元件的调整，以补偿不同高压光学厚度。
The relative displacement is carried out by exerting a pressure force (F) on at least one of the assembly components, approximately in the direction of the longitudinal axis (14).
为了产生所述相对运动，在至少一个待组装的构件上施加一大致沿纵轴线（14）的方向定向的压力（F）。
The relative displacement is carried out by exerting a pressure force (F) on at least one of the assembly components, approximately in the direction of the longitudinal axis (14).
为了产生所述相对运动，在至少一个待组装的构件上施加一大致沿纵轴线（14）的方向定向的压力（F）。
应用推荐