The results from experiments showed that the relationship between modulus of elasticity(MOE), modulus and Rupture(MOR) and adhesive pressure are non-linear.
结果表明，塑化杨木单板的静曲模量和静曲强度与塑化压力呈非线性关系。
The general methods and effect factors of adhesive blockage technique on-line operation with temperature and pressure were introduced. Some examples of its application were given.
介绍了化工设备带温带压粘接堵漏的常用方法及其影响因素。结合实例，阐述了该技术在化工设备运行状态下的应用情况。
The Guanxingao patch was prepared by acrylic pressure sensitive adhesive as matrix.
以丙烯酸酯压敏胶为基质制备冠心膏贴片。
The influences of photoinitiator, crosslinking agent and cure time on the properties of UV curing pressure sensitive adhesive were discussed in the paper.
在常温下涂布后直接紫外光交联固化，考察了光引发剂、交联剂、光固化时间等因素对UV固化压敏胶综合性能的影响。
CONCLUSION: the blank pressure sensitivity adhesive prevented drug from reservoir toward skin, and the transdermal enhancers enhanced the drug releasing speed.
结论：空白压敏胶对药物从贮库向皮肤转运有一定程度的阻滞作用。
This paper describes the effects of various barks, reinforcing resins, keeping-time after lay-up and pressure on the bonding strength of plywood made from Masson pine bark adhesive.
本文探讨了用马尾松树皮胶压制室外型胶合板时，不同部位的树皮、不同增强剂、增强剂用量、单板涂胶后的陈放时间、热压压力等因素对胶合强度的影响。
Foamed TAPES are made from EVA foam and foamed substances as the backing material, then coated with Pressure-sensitive adhesive.
是以eva泡棉等发泡体为基材，涂以压敏胶制造而成。
The result of experiment showed that the anti aging effect of the composites was good, and using this antioxidant could solve the aging of SIS in the hot melt pressure sensitive adhesive.
结果表明：新型防老剂抗老化效果较好，可解决热熔压敏胶中SIS的老化问题。
Please note: You must be able to provide the pressure sensitive adhesive backing in addition to the fiberglass mesh.
备注：贵方提供的玻璃纤维网格背部必须有压敏粘性贴。
Methods: the effect of adhesive concentration, milling time and pressure on the dissolution of Nimesulide tablets were studied.
方法考察粘合剂浓度、研磨时间、压片力对尼美舒利片溶出度的影响。
Meanwhile relevant speed distributed function, pressure distributed function and dynamic boundary equation met the adhesive pressure boundary condition are given in this paper.
并给出了相应地速度分布函数、压力分布函数和满足附着边界压力条件的动态边界方程。
The mat-burst problem in the manufacture process is always associated with the co-effect of uncompleted solidify of the adhesive and the over-high of the internal vapor pressure.
生产中的鼔泡现象是内部蒸汽压力较大和胶粘剂没有完全固化共同导致的结果。
Objective To explore problems of chemical indicative cards and adhesive tapes in the disinfection, and find out some measures for improving the sterilizing effect of the pressure steam sterilizer.
目的：探讨化学指示卡、胶带在灭菌过程测试中存在的问题，并找出解决问题的措施，以提高压力蒸汽灭菌器效果监测的质量。
SOLARITE KM-4368-FR is a fire-retardant pressure sensitive adhesive. It was developed for the purpose of bonding a treated Teflon film to foil or polyester and glass fiber screen.
SolariteKM- 4368 -FR是一种阻燃型压敏粘合剂，用于将将处理过的聚四氟乙烯薄膜粘合到金属薄片或聚酯和玻璃纤维屏上。
The silicon-containing pressure sensitive adhesive composition includes acrylate or methacrylate functionality.
含硅压敏粘合剂组合物包含丙烯酸酯或甲基丙烯酸酯官 能度。
Used in pressure sensitive adhesives, adhesives products. It can improve initial grad and permanence, flexibility, felt intensity of hod melt adhesive.
应用于压敏胶、粘合剂行业，能提高热熔胶和压敏胶的初粘性、持粘性、柔韧性和增加粘接强度。
This paper will mainly discuss the application and improvement of equal pressure principle, dustproof adhesive tape, and drain hole of European aluminum composite wood doors and windows.
对此，本文主要从欧式铝木复合门窗等压原理及防尘胶条、排水孔的应用及改进等方面进行分析与探讨。
So it is widely applied to pressure-sensitive adhesive, hot-melt adhesive, traffic paint, viscosity increaser for rubber, printing ink, hydrophobic agent for paper etc.
因此，被广泛应用于压敏胶粘剂、热熔性胶粘剂、交通路标漆、橡胶增粘剂、涂料、印刷油墨、纸张的疏水剂等。
The paper mainly introduced the process of manufacturing pressure sensitive adhesive tapes of polytetrafluoroethylene film and organosilicon pressure sensitive adhesive.
主要介绍了聚四氟乙烯薄膜和有机硅压敏胶制造压敏胶粘带的方法。
Method of semiconductor wafer back processing, method of substrate back processing, and radiation-curable pressure-sensitive adhesive sheet.
半导体晶圆背面加工方法，衬底背面加工方法，和辐射固化型压敏粘着片。
A formula of active earth pressure on retaining wall was proposed which considers the cohesion force on sliding plane and the adhesive force on interface of soil and retaining wall.
考虑滑裂面上填土的粘聚力及填土与墙背接触面上的粘着力，推得了粘性填土挡墙上的主动土压力计算公式。
O PE ration guide: Clean up the surfaces of the materials, then apply the adhesive to the surfaces after 7to 10 minutes with firm pressure. Please bond the materials before dry.
操作指引：将粘接材料表面清理干净，均匀涂刷胶浆待7到10分钟自然干燥后压紧便可，要在胶浆干燥前粘合。
Expansion extrusion molding, extrusion molding apparatus therefor, and process for producing pressure-sensitive adhesive sheet.
膨胀挤出模塑，采用该法的挤出模塑装置，及用于制备压敏粘合剂片材的方法。
The tyre leakage resistant valve adopts integrated schemes that air is preserved by air pressure, by mechanical pressure and by adhesive blockage.
系采用气压保气和械压保气、胶堵保气的综合方案。
Common problems available in the production of cream-colored bi-oriented PP pressure-sensitive adhesive tapes were introduced. Reasons were revealed and ways to solve the problems were proposed.
本文介绍了米黄色双向拉伸聚丙烯压敏胶带生产中常见的问题，揭示了问题产生的原因，提出了解决问题的方法。
The paper applies the nonlinear soil yield law of "principle of effective stress" based on porous medium to study influence of pressure distribution to adhesive force.
本文采用基于多孔介质下“有效应力原理”的土壤非线性屈服准则来研究压力分布对附着力的影响问题。
Biaxially oriented polypropylene film (BOPP) as the base material, made of packing tape coated with pressure-sensitive adhesive.
以双向拉伸聚丙烯薄膜(BOPP)为基材，涂压敏胶制成包装胶带。
Biaxially oriented polypropylene film (BOPP) as the base material, made of packing tape coated with pressure-sensitive adhesive.
以双向拉伸聚丙烯薄膜(BOPP)为基材，涂压敏胶制成包装胶带。
应用推荐