Green-pressing density, simulated green-pressing strength and bonding momental of high frequency brazing were assayed.
测定了它们的冷压生坯密度、模拟生坯强度以及高频钎焊的结合力矩；
By pressing at very much higher temperatures lower pressures are required as the yield strength of the material is lower.
由于很高温度下材料的屈服强度较低，因此只需较低压力就能挤压。
The results showed moisture adsorption of the platen dried veneer was lower and its dimensional stability was better, but its impact strength dropped when pressing temperature was too high.
研究结果表明：高温热压后的板材吸湿性降低，尺寸稳定性好，但热压温度过高会产生木材热分解，冲击强度略有降低。
She was holding a teaspoon in her two hands, pressing her thumbs against it as if measuring her strength against the base metal.
她双手拿著一个茶匙，用拇指使劲按著它，好像同这块普通金属较量力气似的。
The effects of beating and pressing on the tearing strength of paper also have been investigated.
本文主要研究论述硫化体系对硫化硅橡胶老化后撕裂强度的影响。
Micron wood fiber molded product is a new kind of high strength man-made wooden product made by wood-cell longitudinal breaking and mold pressing.
微米木纤维模压制品是通过细胞纵向劈裂而成的微米木纤维模压成型的新型高强度人造木基材料制品。
Influence of hot-pressing time, temperature and pressure on the porosity and compressive strength of the scaffold.
不同热压时间、温度、压力对支架孔隙率及抗压强度的影响。
Main point: when pressing "Tai Yang", more slower more better. And both the roots of palms pressing cooperatively to inside with slightly strength.
要领：在熨太阳时，速度愈慢越好，并且双掌要稍用力向内合压。
In applying hot briquetting for ISP dross processing, influences of pressure, temperature, time of pressing on strength of hot briquetes have been examined.
在用ISP法冶炼浮渣热压团时，研究了压团压力、温度、加压时间对铅锌密闭鼓风炉冶炼浮渣热压团块强度的影响。
We take three factors into consideration including coupling agents, assembly time, and hot pressing time to analysis the influence they play to MOR, MOE, surface bond strength, bond strength.
确定偶联剂、陈化时间和热压温度为实验因素，以静曲强度、弹性模量、胶合强度、表面胶合强度为衡量指标。
Therefore we point out a new method of testing fragile material's strength of extension. That is to say we can measure the disk's strength of extension by pressing in its diametric.
从而对脆性材料抗拉强度的测定提出了一种新的方法，即通过对圆盘沿直径对心受压试验可测出其抗拉强度。
Finally, the bonding strength of IC resin and wood under hot pressing was tested. The relationship between bonding strength and reaction degree was analyzed.
论文最后对异氰酸酯热压胶接木材的强度与反应程度之间的关系作了初步研究。
First, they checked the strength and durability of the jaws by pressing them with a microscopic diamond probe.
首先，他们通过一个微型的金刚石探测器来检测他们的强度和耐久度。
While mining companies' optimism about the strength of metals prices is one factor, there are other, arguably more pressing reasons for the current wave of consolidation.
矿业企业对金属价格走强的乐观情绪，是解释当前整合浪潮的一个原因，此外还存在其它方面可以说更为紧迫的原因。
Apart from the pressure of the diaphragm pressing down and pushing outside the muscular strength of the back also support the high-pitched voices.
歌唱时气息支持，除用横隔膜力量向下推压向外扩以外，后背的肌肉力量对高音的支持也同样重要。
The glass fiber strengthen unsaturated polyester mould pressing shape outer covering. Have the strength high, bear the impact and bear the good function in etc. in corrosion.
玻璃纤维增强不饱和聚脂模压成型外壳，具有强度高，耐冲击、耐腐蚀等优良性能。
The results show that interface element diffusion and reaction on interface in vacuum hot-pressing sintering processing improved interface strength. Fracture occurred mainly in Al matrix.
结果表明，真空烧结过程中出现了界面反应，改善了界面结合强度，断裂破坏主要在基体上进行。
The results showed refining has no effect on shear bond strength and wet pressing can improve shear bond strength slightly, the increase oft…
提高打浆度和增大湿压对纸页抗张强度的提高主要是纤维相对结合面积增大的结果。
With veneers and inlays, a technician is often limited, by preparation and strength considerations, to pressing the veneer full contour and characterizing the external surface with stain.
制作瓷贴面与嵌体时，技师常常受到牙体预备与强度考虑的限制。只能铸出全形态后在外表面染色。
Two combined welding processes for 65Mn high strength strip steel, including gas welding-forging and pressing-tempering and argon arc welding-heat treatment, are introduced in the paper.
研究气焊—锻压—热处理和氩弧焊—热处理两种复合工艺连接高强度钢带。
The cloth brush single body improves tension strength and durability of cloth materials by the heat pressing treatment of whole surface, which may reduce breakage such as break, etc.
布制刷子单体通过进行整面热压着处理的 单面而强化，提高布材质的耐久性及拉伸强度，可降低破裂等的破损。
The glass fiber strengthen unsaturated polyester mould pressing shape outer covering. Have the strength high, bear the impact and bear the good function in etc. in corrosion.
玻璃纤维增强不饱和聚脂模压成型外壳，具有强度高耐冲击，耐腐蚀等优良性能。
The glass fiber strengthen unsaturated polyester mould pressing shape outer covering. Have the strength high, bear the impact and bear the good function in etc. in corrosion.
玻璃纤维增强不饱和聚脂模压成型外壳，具有强度高耐冲击，耐腐蚀等优良性能。
应用推荐