A novel thin-film MEMS microwave power sensor is presented.
提出了一种新型的MEMS微波功率传感器。
The Wiegand sensor which is a kind of zero power sensor is choosed as theimpulse sensor.
脉冲传感器选择韦根传感器，是一种零功耗磁敏传感器。
We often use a simple, low-power sensor to turn on others in response to a preprogrammed stimulus.
我们经常在事前以程序预设好刺激反应，然后使用简单、功率的感测器启动其他设备。
Then the designing bases on MSP430F2254 microcontroller and CC2420 low-power sensor node temperature acquisition system.
然后设计了一种基于MSP430F 2254微控制器和CC 2420低功耗的传感器节点温度采集系统方案。
Microwave nW power sensor USES low barrier schottky diode (LBSD) as a component for testing the power of microwave signals.
本文介绍了使用低势垒肖特基二极管(LBSD)作为检测微波信号功率元件的微波毫微瓦功率传感器。
If a power meter and power sensor has a 1-mhz video bandwidth, it will act as a typical low pass filter with a 3-db rolloff point at 1 MHz.
如果功率计和功率传感器拥有1 M Hz的视频带宽，他将扮演一个- 3db截止点为1mhz的典型低通滤波器。
An online type microwave power sensor structure is presented based on MEMS technology. The theory, design, fabrication and measurement are given.
提出了一种基于MEMS技术白勺在线式微波功率传感器构造，并对该构造停止了理论分析、设计、制作和测量。
The transmitter comprises a power sensor which can sense when other transmitters are transmitting in order for the generator to transmit the pulses at the appropriate time.
所述传输器包含功率传感器，其可感测其它传输器何时 在传输以便使所述产生器在适当时间传输脉冲。
Disclosed is a power sensor for a pulse generator of a transmitter which can sense when other transmitters are transmitting in order for the generator to transmit the pulses at the appropriate time.
本发明揭示一种用于传输器的脉冲产生器的功率传感器，其可感测其它传输器何时在传输以便使所述产生器在适当时间传输脉冲。
Earlier this year researchers at Intel and the University of Washington, in Seattle, showed that they could power a small sensor using a TV signal 4.1 kilometres away.
今年早些时候，英特尔及西雅图华盛顿大学的研究人员演示表明，他们能够从4.1公里以外的电视信号中获取能量来给一个小功率传感器供电。
Power utilities are well ahead, not least because they can use the grid itself to collect sensor data and control switches.
供电行业远远走在了前面，主要原因是他们可以利用电网来收集传感器反馈的数据和控制伺服开关。
For example, the researchers last week said they had managed to gather enough energy from a TV station a half-kilometer away to power a small temperature sensor.
例如，研究人员上周说，他们已经设法从半公里远的一座电视发射台收集了足够了能量给一个小型温度传感器供电。
Instead of a battery lasting two days, the same battery providing power to sensor systems built with carbon nanotube transistors may last up to two weeks, "said Przybysz."
代之以持续两天的电池，同样的电池为用碳纳米管晶体管制造的传感器系统提供的能量可以持续两周的时间。
By leveraging the power of modern data links and Global Information Grid-like networks, the F-16CJ was able to down-link sensor data real-time to the DCGS at Langley AFB in Virginia for processing.
通过利用现代数据链和全球信息栅格网络，F - 16 CJ飞机能下行传感器数据实时送到弗吉尼亚州的兰利空军基地通用地面站处理。
The new engines can also provide added power generation for future upgrades to the radar sensor and mission equipment.
飞机装备的新型发动机还能提供附加的电源，以备未来升级到雷达传感器和任务设备中。
Design the signal adjust circuit for sensor, and the power amplification circuit for the hydraulic pressure system of test platform and the controller of magnetorheological dampers.
设计出传感器输入输出信号调理电路和试验台架液压激振系统、磁流变阻尼器控制器的功率放大电路。
It will set up ar model, analyze power spectrum, and calculate transfer function and delay time, thus several fundamental problems in the research of robot wrist sensor can be solved.
建立了AR模型，分析了功率谱，计算了传递函数和滞后时间，解决了机器人腕力传感器研究中的若干基础性问题。
In this paper, a kind of sensor with constant power pulse width modulation and force balance is described and analysed theoretically.
本文设计了一种恒功率脉冲调宽式力平衡式传感器，并从理论上对它作了分析。
If you want to enable sensor-rich environments, you have to start worrying about what a device is going to look like and how it's going to be supplied with power and networking-practical issues.
如果你想使富感应环境(sensor - rich environments)成为可能，你就必须开始考虑设备的外观设计以及怎样供应能量并将其连接到网络中——这些都是很现实的问题。
Their low-power Wi-Fi chips can be embedded into any system including consumer electronics, smart energy devices, home and building controls, portable medical sensors, and sensor networks.
它的低功耗Wifi芯片可以嵌入任何系统，包括电子消费品、智能能源设备、家庭和建筑控制仪器，便携式医学传感器和传感器网络等。
Sensor is installed as far away from high-power devices, because its own output signal is relatively weak, typically millivolts, vulnerable to interference.
传感器的安装位置尽量远离大功率设备，因为它本身的输出信号就比较弱，通常为毫伏级，极易受到干扰。
This paper refer hybrid sensor types to activation of power supply, activation of light source, silicon microtechnology.
本文评述的混合光纤传感器类型范围涉及：电源驱动、光源驱动、硅微技术。
"Our sensor is measuring both voltage, current and power and we're going to use the solar panel and connect it to it to measure how much solar energy our solar panel absorbs," Rebecca said.
瑞贝卡说：“我们的传感器可测量电压、电流以及电量，我们将利用太阳能电池板，并衡量太阳能电池板吸收了多少太阳能。”
Design of a wireless sensors network is given. Hardware organization, power characteristics and communication model of sensor nodes are introduced in detail.
给出了一种无线传感器网络的设计，详细讨论了传感器节点的硬件组织、电源特征和通信模式。
In this paper, the sensor is developed and used in survey of grinding power.
本文说明了适用于磨削功率测量的电阻型传感器。
As a wireless communication technology with low power consumption in short distance, bluetooth is quite suitable for wireless sensor networks usage.
蓝牙作为一种低功耗短距离无线传输技术，它的特点和范围都非常适合无线传感器网络的要求。
A sensitive, stable and low power consumption magnetic sensor is constructed using a CMOS multivibrator circuit, in which a sharp pulse train current is applied to the treated amorphous ribbon.
同时利用CMOS多谐振荡电路产生窄脉冲电流序列对前面处理过的非晶带进行激励，制作成灵敏度高、稳定性好、功耗低的弱磁场传感器。
A sensitive, stable and low power consumption magnetic sensor is constructed using a CMOS multivibrator circuit, in which a sharp pulse train current is applied to the treated amorphous ribbon.
同时利用CMOS多谐振荡电路产生窄脉冲电流序列对前面处理过的非晶带进行激励，制作成灵敏度高、稳定性好、功耗低的弱磁场传感器。
应用推荐