Feedforward, Predistortion and Feedback linearization techniques are mostly used in Linearity Power Amplifier Design.
目前线性功率放大器的设计主要采用前馈、预失真和功率回退等线性化技术。
Impedance, power and frequency are the three aspects of the core issues to resolve in the microwave power amplifier design process.
在微波功率放大器设计中所要解决的核心问题主要有以下三个方面：阻抗、功率和频率。
The design for high-power MOS tube as the core original pipe, using discrete components and integrated operational amplifier combines the low-frequency power amplifier design.
本计划以大功率管MOS管为核心原件，采用分立元件与集成运放相连合计划出的低频功率放大器。
The objective of this design is to a broadband microwave power transistor used in broadband solid state amplifier.
本设计的目的是建立一个用于宽带固态放大器的宽带微波功率晶体管。
And then the paper introduces the design of power amplifier and DC regulated power supply.
论文重点介绍了功率放大器和直流稳压电源的设计。
Schematic design for infeed and power amplifier circuit.
输入电路和功率放大电路的原理图设计。
A design approach for low power CMOS low noise amplifier (LNA) is presented and it is compared with the traditional LNA design method.
针对低功耗电路设计的需求，提出了一种低功耗约束下CMOS低噪声放大器的设计方法，并与传统的设计方法进行了对比。
This paper introduces the design of common apparatus and ways to make digital power amplifier.
本文介绍了用常用器件设计、制作数字功率放大器的方法。
Microwave power amplifier with large power and high heat flux is a key equipment of satellite which has a great influence on satellite thermal design.
大功率、高热流密度微波功率放大器是环境监测有效载荷中的关键设备，对整星的热设计影响很大。
This paper introduces the structure, hardware circuit and software design of PWM DC power amplifier controlled by microcomputer.
本文介绍了单片机控制的PW M直流功率放大器的结构形式、硬件电路以及软件设计。
The design of the system fabric the DSP control board the algorithm of waveform generating and the power amplifier are introduced.
文中着重介绍了系统架构、DS P控制板、波形产生算法和功率放大器的设计。
This paper describes the general design rules of switching power amplifier and analyses different control strategies.
本文讨论了开关功放设计的一般原则，分析比较了不同的控制策略。
In the design of hardware, the paper details in introducing the reader circuit and function module, especially the theory and method of design in D-type power amplifier, Manchester code and coil.
在硬件设计方面，完成了阅读器主电路及功能模块的设计，特别是对D类功率放大器、编码器和电感线圈的设计理论和方法作了详细介绍。
It is provided that reference better for design of the high power electronic vacuum microwave amplifier future.
为今后设计高功率电真空微波放大器提供了很好的参考。
Uses double-hybrid design forward: first, low-noise amplifier module, then power double amplifier module or GaAs power double amplifier module, while using independent module return.
正向采用双模块设计，第一级采用低噪音放大模块，第二级采用功率倍增或砷化镓功率倍增模。
The design of microwave power amplifier needs large-signal s parameters, but under most circumstances, the designer only has small-signal s parameters and the static I-V curve.
微波功率放大器设计需要大信号s参数，但大多数情况下，设计者只有小信号s参数和静态I - V曲线。
So it has been paid more and more attention in the research and design of microwave power amplifier .
因而，对微波功率放大器的研究和设计也越来越受关注。
This paper introduces the design and fabrication of a Lb and broadband linear power amplifier assembly.
介绍L波段宽带线性功率放大组件的设计与制作。
Finally, the optimal pumping power and fibre length are obtained, which can be used for the design of fibre Raman amplifier.
文中最后得出了设计光纤拉曼放大器时的最优抽运功率和光纤长度。
The paper focuses on circuit design of power switch with bipolar technology and audio amplifier with CMOS techn.
本文论述双极型功率开关电路和CMOS音频功率放大器电路设计。
These results indicate that the performance of improved Power Amplifier meets the design requirements.
结果表明，改进的功率放大器各项性能指标达到设计要求。
In this paper, some key technical indicators of the power amplifier were analyzed in depth firstly, and then design methods of the broadband power amplifier were introduced.
本文首先对功率放大器的一些关键技术指标进行了深入的分析，然后介绍了宽带功率放大器的设计方法。
This thesis narrates the hardware design of Magnetic Suspension ball Control System testing platform, including the design of displacement senor, controller and power amplifier.
本文着重介绍了磁悬浮球控制系统实验平台的硬件设计，介绍了包括位移传感器、控制器、功率放大器的设计过程。
According to the design equations of class-E amplifier, we have analyzed the relationships between the output power and the input voltage.
根据E类放大器的设计方程，分析了E类放大器输出功率与输入电压的特性。
With the continuous advancement of technology, design, D-type power amplifier performance is also moving into the Class AB amplifier.
随着设计技术的不断进步，D类功率放大器的性能指标也逐渐接近AB类放大器。
The characteristics of FEM amplifier with elliptical guide, such as the evolutin of power, efficiency and bandwidth, are analyzed. These results are useful to design FEM devices.
利用该程序研究了椭圆波导FEM放大器的输出功率、效率、带宽等高频特性，并对不同椭圆度的椭圆波导FEM放大器的性能进行了计算、对比分析。
Combining the secondary circuit, we have proposed the design methodology of transcutaneous power transmission system with a class-E amplifier.
结合次级电路，提出了基于E类放大器的经皮能量传输系统的参数设计方法。
Therefore, the design of low-voltage and micro power operational amplifier is very necessary.
因此，设计低压、微功耗的运算放大器是非常必要的。
This thesis does research on the key module of Q-switch driver—high efficiency Class-E power amplifier, including the design and implement of the prototype.
本文主要研究了声光Q开关驱动器的关键模块——高效率E类功率放大器，设计实现了工程样机。
The design of power amplifier report will simply introduces and choose the amplifier circuit design scheme.
这次的设计报告将对功率放大器进行了简单的介绍，并且选择放大电路的设计方案。
应用推荐