This paper discusses the surveying control point position optimization design problem, while the selecting areas of the points are not rectangle, but any irregular polygons.
讨论了当测量控制网网形设计中控制点选点范围为不规则多边形时的点位最优化设计问题。
According to the discrete properties of ro element indexes, the concept of installing position optimization in the technological flow with ro elements was put forward in this paper.
基于反渗透膜元件指标的离散性，提出了膜元件在系统流程中安装位置优化的概念。
The third one belonged to stability criterion optimization that determined the optimal number and position of wing ribs.
第三个层次为稳定性准则优化，它确定横向骨架的个数与位置的最优布局。
The optimization model contains two kinds of designing variables: geometric position variable and geometric dimension variable.
其优化模型包含两类设计变量：几何位置变量和几何尺寸变量。
The optimization is completed through adjustment due to position, combination of heat treatment steps and complementary process steps, and wipe-off of non-effective process steps.
优化合并包括根据定位的调整以及热处理合并，互补工艺合并和无效工艺去除等多个处理过程。
According to image of linear edges in calibration object, the distortion coefficient and position of principal point of imaging system can be calculated by optimization method.
利用标定物直线边缘的图像，并运用优化的方法来计算成像系统的畸变系数和主点位置。
Based on the working feature of flying shear mechanisms and considering the motion track, velocity and position Angle of connecting rod, a multi-objective optimization model is built.
根据飞剪剪切机构的工作特点，综合考虑连杆运动轨迹、速度和位置角，建立多目标优化模型。
An iteration method is presented to solve the optimization function for approximating the rotation transformation part of the pseudo moving frame at any position of the motion trajectory.
采用迭代法求解该优化方程来逼近运动轨迹任意处伪活动标架的旋转变换矩阵。
An optimization approach for minimizing the kinematics error magnification from the linkage variation to the end-effector position is studied based on the graphical design method.
基于此方法，提出了一种优化途径，用以最小化由连杆长度误差至末端执行器运动学位置误差之间的误差放大倍率。
Finally we use this dynamic model of optimization in mean-shift algorithm, and compute object's true position.
最后将最优化的运动模型用于基于核的均值转移算法中，从而获得运动目标的精确位置。
Aiming at the problem that normal Particle Swarm Optimization (PSO) algorithm can not approach the best position effectively in dynamic environment, this paper proposes a dynamic PSO algorithm.
针对普通粒子群优化算法难以在动态环境下有效逼近最优位置的问题，提出一种动态粒子群优化算法。
In allusion to the problem of dynamic self-calibration, a novel self-calibrating algorithm for visual position based on particle swarm optimization (PSO) is suggested in this paper.
针对动态自标定的问题，提出了一种改进的基于粒子群优化(PSO)的自标定位置视觉定位算法。
From the thinking of both position variables and size variables, a global method that can solve the optimization problems was present in this paper.
从元件位置和元件尺寸两个方面考虑，提出了一种全局结构优化设计方法。
The optimization requires the minimization of the normal acceleration overload at the position of pilot, the attitude variation and the control energy consumption under gust disturbance.
优化性能指标要求在阵风扰动下驾驶员处法向过载、飞机姿态变化、以及控制信号能量损耗最小。
In this paper we describe simulation analysis and optimization on the characteristic parameters of regenerator, such as the length, the spacing of plates, the position in sound field of regenerator.
本文对回热器的长度、水力半径或板叠间隙、回热器在驻波声场中的位置等回热器特性参数对其性能的影响进行了模拟分析，并在此基础上对回热器或板叠特性参数进行了优化。
For example, for someone applying for a human-resources position, it would be wise to include key words such as' recruiting 'and' hiring 'near the top of a resume for better search optimization.
例如，在申请人力资源方面的职位时，在靠近简历上方的位置加入诸如“招聘”和“雇用”等关键词以实现更好的搜索优化可能是明智之举。
The problems of optimization and optimal geometrical figure of the resection are discussed in the paper, moreover, a practical and simple method for determining the reliable point position is given.
该文讨论了后方交会的优化及最佳几何图形问题，文中还给出一种实用而简单的判定可靠点位的方法。
POSITION SUMMARY circuit design Engineer is responsible for the design and optimization of control circuit for welding machine.
电路设计工程师负责焊机设备电路的设计和优化。
Therefore, for a real catalyst the re-optimization of the distribution width and position must be performed about the specific position.
因此，为使真实催化剂具有最佳有效因子，就必须在附近对分布宽度和位置再次进行优化。
C language is used to build optimization program, and the position parameters of the hydraulic jar is optimized.
本文利用C语言编制了优化程序，对液压缸位置参数进行了优化。
The position emphasizes organization, change management, work process optimization, planning, and leadership skills with broad knowledge of many engineering disciplines.
该职位强调组织机构、变革管理、工作流程优化、规划和广泛了解各类工程专业的领导技能。
Heighten precision and veracity of GPS position with numerical process and optimization is a critical emphasis to the research.
对GPS观测值进行统计处理与数值优化以提高GPS定位精度与准确度成为本课题研究的一大重点。
The position and the weighted coefficients can be optimized at the same time. The cases showed that this method had a strong ability to find to global optimization solution.
实验实例表明：该算法收敛速度快，有极强的避免过早收敛及避免局部极值的全局优化的能力。
The first one belonged to topology optimization that determined the optimal number and position of wing spars .
它确定横向骨架的个数与位置的最优布局。
The structure of the SFOC antenna is constructed, and the optimum-feed position (OFP) and the optimum-feed direction (OFD) are analyzed by using the ray tracing method and the optimization method.
给出了SFOC天线的结构形式，通过射线追踪的方法对SFOC的最佳馈源位置和最佳馈源指向进行了优化设计。
The symmetry or optimization of the position is not prerequisite to the mechanism.
但是交易对手地位对称或地位最大化并非为限制性进入机制的必要内涵。
A health monitoring and fault detect primary scheme is given including optimization on monitoring position and quantity, transducer type selection, fault information abstraction and detect methods.
提出了航天器机械臂的初步的健康监控方案：监测部位的选择，传感器的选择和安装，故障信息提取与故障检测方法的采用。
A health monitoring and fault detect primary scheme is given including optimization on monitoring position and quantity, transducer type selection, fault information abstraction and detect methods.
提出了航天器机械臂的初步的健康监控方案：监测部位的选择，传感器的选择和安装，故障信息提取与故障检测方法的采用。
应用推荐