This paper presents a new dual-amplitude pulse position modulation (DAPPM) on the basis of PPM.
针对该问题，提出了一种新的双幅度脉冲位置调制(DAPPM)。
The pulse position modulation (PPM) technique is widely used in the field of ultra-wideband wireless digital communication.
时间脉冲位置调制(PPM)技术在超宽带无线数字通信领域得到了广泛应用。
Frame synchronization is a key part in Pulse Position Modulation. The performance of this part affects the whole performance of the PPM system.
帧同步是脉位调制中关键的一部分，其性能的好坏直接影响到整个系统的性能。
As a new communication technology, PPM (pulse position modulation) technology can be easily coded, and has a high efficiency of energy transmission.
PP M脉冲位置调制通信技术作为一种新兴的通信技术，具有编码简单、能量传输效率高的优点。
The optimum receiver performance of a hybrid pulse phase and position modulation(PAPM) over ultra-wideband(UWB) indoor fading channel model is analyzed.
分析了UWB室内衰落信道模型下脉冲幅度位置混合调制（PAPM）最优接收机性能。
Pulse position amplitude modulation (PPAM) is a new modulation scheme that combines pulse position modulation (PPM) and pulse amplitude modulation (PAM) together.
脉冲位置幅度调制(PPAM)是一种将脉冲位置调制(PPM)和脉冲幅度调制(PAM)结合到一起的新型调制方式。
The performance of time hopping pulse position modulation (TH-PPM) UWB system using this wavelet monocycle was studied under additive white Gaussian noise (AWGN) channel.
同时还研究了在加性高斯白噪声(AWGN)信道中，跳时扩频脉位调制(TH PPM)的UWB系统中使用该窄脉冲的系统性能。
Random pulse position modulation (RPPM) signal not only has good resolution of distance and velocity, but also has low probability of interception and strong properties of eccm.
随机脉位调制信号不仅具有良好的距离和速度分辨力，而且具有较低的被截获概率和较高的抗干扰性能。
Pulse Position Modulation (PPM) is one of key technologies for laser communication in Atmosphere, which can reduces the output power of the laser and increases communication distance.
脉冲位置调制(PPM)是大气激光通信的关键技术之一，可以减少激光器的发射功率，增加通信距离。
The design method for hybrid waveforms utilizing ran-dom poly-cell code pulse position modulation (PPM) and pulse-to-pulse binary sequences phase modulation (PM) is introduced in this paper.
该文提出了一种利用随机多元码脉位调制(PPM)和脉间伪随机或随机二元序列相位调制(PM)相结合的混合波形设计方法。
The application of MPPM(Multi-Pulse Position Modulation)in optical wireless communication was studied in this paper, and a new modulation technique described as Improved MPPM(IMPPM)was presented.
讨论了MPPM（多脉冲位置调制）在无线光通信中的应用，同时提出了一种改进型多脉冲调制方式——（IMPPM）。
Meanwhile, the paper focuses on the function and the hardware implement of the signal modulation unit and the position regulator.
接着，还重点介绍了信号调理单元、位置调节器的功能和硬件电路实现。
Position control of d. c. motors has been done by means of pulse width modulation .
直流电机位置用脉冲宽度调制法控制。
A pneumatic position servo system with pulse code modulation (PCM) is described in this paper.
本文研究脉冲编码调制(PCM)控制方式的气压位置伺服系统。
The servo control system combines position loop, speed loop, current loop with algorithm of space vector pulse width modulation(SVPWM).
系统采用位置、速度和电流环三环控制，并结合空间矢量脉宽调制（SVPWM）算法。
A polarization modulation technology for a position sensor with grating imaging is presented and its modulation principle is analyzed with Muller matrix.
提出了一种用于光栅成像位置传感器的偏振调制技术，利用米勒矩阵对其调制原理进行了详细的分析。
Position control of d. c. motors has been done by means of pulse width modulation.
直流电机位置用脉冲宽度调制法控制。
According to frequency spectrum transfer characteristic of modulation and demodulation, we think the position measurement noise is Gaussian narrowband noise.
根据调制解调的频谱转移特性，提出了有效位移噪声是高斯窄带噪声。
The group-velocity mismatch can considerably change the gain spectrum of modulation instability in terms of its shape, peak value, and position.
而群速度失配可极大地改变调制不稳定性增益谱的形状、峰值和位置。
Digital mod technology in the digital communication occupies a very important position, commonly used digital modulation are: frequency shift keying (FSK) and phase-shift keying (PSK), and so on.
数字调制解调技术在数字通信中占有非常重要的地位，常用的数字调制有：移频键控(FSK)和移相键控(PS K)等。
The ultra wideband (UWB) radio models have been introduced with pulse-position-modulation (PPM), on-off-keying (OOK) and pulse-amplitude-modulation (PAM).
分析了超宽带冲激无线电的脉位调制、通断键控调制和脉冲幅度调制的信号模型。
Voltage waves are deduces on lower bridge arm PWM modulation and theory of rotor position detection based on EMF is introduced.
分析了下桥臂调制方式下绕组端电压波形，并基于此介绍了反电势法检测转子位置原理。
The centrobaric method was used to determine the position with the maximum modulation value of fringes and the position was used as the point of zero light path difference.
采用重心法确定干涉条纹调制度的最大值位置，并以此作为零光程差位置。
Furthermore, it proposes a solution on adaptive coded modulation system using the hybrid position location technology, which can improve the exploitation of systems.
并提出了一种基于联合定位技术的自适应编码调制传输方案，该方案可有效提高系统资源的综合利用率。
Furthermore, it proposes a solution on adaptive coded modulation system using the hybrid position location technology, which can improve the exploitation of systems.
并提出了一种基于联合定位技术的自适应编码调制传输方案，该方案可有效提高系统资源的综合利用率。
应用推荐