Spray polyurea elastomer (SPUA) material is a novel one made by spray technology which contains 100% solids and no solvent (0 VOC's). Generating no pollution.
喷涂聚脲弹性体(SPUA)材料是采用喷涂工艺制成的100%固含量、无溶剂、无污染的新型材料。
The performances of polyurea grease are compared with other types of greases.
对比了聚脲润滑脂与其他类型润滑脂的性能。
The influence of flame retardant agent on the properties of spray polyurea elastomer was studied.
研究了阻燃剂对喷涂聚脲弹性体各种性能的影响。
This paper introduces construction technology of spray polyurea elastomer used in Beijing Shooting Range CTF.
介绍了奥运射击中心飞碟靶场看台屋面防水耐磨工程采用喷涂聚脲弹性体的施工工艺。
A technique of spraying polyurea (SPUA) is a new technique using the special equipments and in situ spraying process.
喷涂聚脲(SPUA)技术是采用专用设备，现场喷涂工艺施工的一种新技术。
Organic silicon polyurea base polymer, elastic body prepared by the same, preparation method and application thereof.
有机硅聚脲基础聚合物，其制备的弹性体，其制备方法及其应用。
The characteristics of special polyurea grease for motor bearing and its application effects are analysed and discussed.
对电机轴承专用聚脲基脂的特点及其在电机轴承上的应用效果进行了分析和探讨。
This paper has reviewed the reaction spray molding (RSM) technology of polyurea - polyurethane and its application scope.
介绍了聚脲-聚氨酯反应喷涂成型技术的基本情况及应用范围。
The shear stability of the poly-urea grease is improved. The application of several aviation polyurea greases is also introduced.
介绍了改进聚脲润滑脂剪切安定性的研究和几种聚脲航空润滑脂的应用情况。
The manufacture of polyurea polyol (PHD) is so complex that the preparation of title compound is difficult in common laboratory and plant.
聚脲多元醇phd的生产工艺复杂，在普通实验室和工厂合成较为困难。
Recently polyurea, polyamide, polyurethane and other non-degradable materials which take up most of carrier materials cause new environmental problems.
目前缓释农药制剂的载体材料大部分采用聚脲、聚酰胺、聚氨酯等非降解性材料，又给环境增加了新的问题。
The results showed that the flame retardant property of spray polyurea elastomer were improved obviously by using complex flame retardant agent system.
结果表明，采用所筛选出的复合阻燃剂可大大提高聚脲体系的阻燃性能，得到阻燃性能良好的喷涂聚脲产品。
Wear - resistance spray polyurea elastomer SPUA-102 was prepared from MDI, liquified MDI, polyether polyol, polyether polyamine and polyamine chain-extender.
以MDI、 液化MDI、 聚醚多元醇、端氨基聚醚及肢类扩链剂等为原料，研制了一种喷涂型耐磨聚脲弹性体SPUA-102。
Three kinds of co- polyurea porous membranes have different mechanical properties and the aromatic co- polyurea membranes have the best mechanical properties.
多孔膜的机械性能也都各不相同，其中芳香族共聚脲多孔膜具有最好的机械性能。
The organic combined technology of sprayed polyurea elastomer and spayed polyurethane foam is suitable for site spray of waterproof and thermal insulation roof.
喷涂聚脲弹性体及喷涂聚氨酯弹性体技术，两者有机结合，适用于防水、保温屋面的现场喷涂。
The main ingredients are double constituent polyurea. It has advantage areas such as good adhesive, elastic, abrasion-resistance and resistance to yellowing etc.
其主要成份为双组份聚脲，具有附着力强、弹性好、耐磨性能优良、耐黄变性能优异等特点。
All the results indicate that interfacial polymerization between isocyanate and amine to form polyurea wall material is a quick, effective way for capsulation of wax.
实验结果表明由异氰酸酯与胺反应形成聚脲囊壁材料是一种快速、有效的包裹石蜡的方法。
The application of special polyurea grease for motor can make the operating temperature of motor bearing fall down obviously and the failure rate of motor reduce also.
采用电机专用聚脲基脂后，电机轴承工作温度明显下降，电机故障率明显减少。
This paper introduces mechanical property, medium resistance, low temperature toughness, age resistance, adhesive tension and construction of sprayed polyurea elastomer.
介绍喷涂聚脲弹性体的力学性能，耐介质性、低温韧性、耐老化性、附着力及其施工。
A series of polysulfide based thio-polyurea was synthesized, which were based on isophorone diisocyanate, liquid polysulfide and 2,5-diamino-3,6-dimethylmercapto toluene.
以液态聚硫橡胶、异氟尔酮二异氰酸酯和扩链剂3，6 -二甲硫基-2 ，5 -二甲苯胺为原料，合成了不同硬段质量分数的聚硫硫代聚脲。
In this paper, we introduce one-part polyurea concept and its rubber physical properties after the one-part polyurea cured, and the application of construction waterproof.
本文简要介绍了单组分聚脲的概念，防水涂膜的物理性能，以及其在建筑防水工程上的应用。
The results show that the level of polysulfide polyurea and the content of hard segment in polysulfide polyurea influence the morphology, T_g and modulus of cured epoxy resin.
结果表明，液体聚硫聚脲齐聚物的用量、齐聚物中聚脲含量对固化后的环氧树脂玻璃化温度、模量及形态有较大影响。
The article describes the way of waterproofing maintenance with exposure-type single component polyurea coating for an indoor swimming pool on the fifth floor of a hotel, Xian.
介绍了西安某酒店五楼的室内游泳池采用暴露型单组分聚脲涂料进行防水维修的施工工艺。
By the invention, not only the antistatic property of the polyurea elastomer is improved, but also the miscibility as well as the mechanical performance is integrally improved.
通过本发明不仅改善了聚脲弹性体的抗静电性能，而且整体提高了材料的混合性和力学性能。
It was found that the sprayed polyurea elastomer could be used to efficiently prevent the steel gate from corrosion, and the technology could have enormous long-term economic benefit.
结果表明，喷涂聚脲弹性体可有效地防止挡潮闸钢闸门的腐蚀，具有较长期的经济效益。
This article introduces the concept and reaction principle of single component polyurea. It also discusses its physical properties and the application in building waterproofing project.
介绍了单组分聚脲的概念、反应原理、防水涂膜的物理性能及其在建筑防水工程上的应用。
Baltic Birch enclosure with Polyurea coating.
波罗的海桦木箱体，聚脲涂料。
Spray Polyurea Elastic(SPUA) is new-fashioned technology of non-solvent and non-pollution adverse effect.
喷涂聚脲弹性体技术是一种新型无溶剂、无污染的绿色施工技术。
Spray Polyurea Elastic(SPUA) is new-fashioned technology of non-solvent and non-pollution adverse effect.
喷涂聚脲弹性体技术是一种新型无溶剂、无污染的绿色施工技术。
应用推荐