Based on the study of polymer performance, the special performance that used in the FDM.
在高聚物材料性能研究基础上，阐释了熔融沉积成型工艺所要求的材料的特殊性能。
This review summarizes several photochemical methods of immobilization biomolecules on polymer materials in order to enhance its biomedical performance.
综述了在高分子材料表面固定生物分子以增强其生物医学应用性能的光化学方法。
The performance of the resin latex film was not only dependent on its formulation and the molecular chain structure of the polymer inside, but also the film formation process of the polymer.
树脂乳胶膜的性能不仅与涂料的配方和其中聚合物的分子链结构有关，而且与聚合物的成膜过程密切相关。
As the sulfonated polymer products, and certain anti-collapse performance.
由于聚合物磺化产品，又有一定的防塌性能。
Hydrophobically associating polymer solution has special shearing resistance performance because of introduced associating base group, so there is a wide application prospect in oil gas exploitation.
疏水缔合聚合物分子链上疏水基团的引入使其溶液具有独特的抗剪切性能，从而在油气田开采领域具有广阔的应用前景。
It proves by further experiment that high polymer additives in the abrasive water jet also bring about the improvement on the jet performance.
并进一步在磨料射流中加入高分子聚合物添加剂，实验证明，高分子减阻剂同样对磨料射流性能有改善。
The structure character of hyperbranched polymer, its unique solution and bulk property, and the main affect factors on the performance, were introduced.
介绍了超支化聚合物结构特征，独特的溶液和本体性能，以及影响这些性能的主要因素。
Up till the present moment, the performance of polymer LEDs is far from the demands in their practical application.
目前，聚合物发光二极管的各项性能距实际应用的要求还有相当一段距离。
We optimized the performance of the PSCT valve by adjusting the cholesteric pitch, the polymer concentration and polymerization condition.
通过调节胆甾相液晶的螺矩、聚合物的浓度和聚合反应条件，我们能使PSCT光阀性能最优化。
Through the analysis of the necessity of the water-proof dope of bridge pavement, discussion is made on the performance of the macromolecule polymer dope.
从高等级公路桥梁桥面防水的必要性入手，介绍了高分子聚合物防水涂料的性能要求及施工方法。
The result shows the coordinate action of a certain variety and quantity of mineral powder and emulsion powder effectively increases every performance of polymer cement mortar.
结果发现一定品种和掺量的矿粉与乳胶粉协同作用有效地提高了聚合物水泥砂浆的各项性能。
Methyl cellulose is a kind of non-ionic water-soluble polymer. Its performance was briefly introduced and its formula used for water-based coating was described in details.
甲基纤维素是一种非离子型水溶性聚合物。简要介绍了它的性能，详细阐述了它在水性涂料中的应用配方。
Calcium carbonate whiskers are characteristic of low cost, high whiteness and big package, and they are widely used for improving the mechanic performance of polymer composite.
碳酸钙晶须具有成本低、白度高、填充量大的特点，因而大量地用于改善聚合物复合材料的力学性能。
Mixing the polymer into mortar can improve the interface bonding performance between mortar and foamed polystyrene block.
在砂浆中掺加高分子聚合物，以提高砂浆与发泡聚苯板的界面结合性能。
On the basis of these mentioned above, a high-solid hydroxyl acrylic polymer with required performance were prepared.
在此基础上合成了性能符合要求的高固体分羟基丙烯酸聚合物。
Wollastonite as polymer filler is considered as an important direction to the utilization of wollastonite, which reduces the polymer product cost and improves product performance.
硅灰石用作聚合物填料可降低聚合物产品的成本，改善其性能，已成为硅灰石开发利用的重要方向。
The main performance, characteristics and the market prospect of polymer lithium ion batteries are introduced as well as the solid polymer electrolyte it adopted.
介绍了聚合物锂离子蓄电池的主要性能特点，采用的聚合物固体电解质体系和市场前景。
Study was made of synthesis of film forming material for glass microballoon emulsion coating and influence of various factors on polymer film performance is described.
研究了玻璃微珠乳胶涂料成膜物的合成，叙述了各种因素对聚合物涂膜性能的影响。
The polymer separator play an important role, the performance of PVDF is one of the most important factors that determine the performance of battery.
电解质隔膜在聚合物锂离子电池中起到了关键作用，其性能是决定电池性能的重要因素之一。
This thesis mainly studies the adhesive performance between concrete and polymer mortar and the bond performance of steel weirs anchoring in the mortar.
本论文主要研究聚合砂浆与混凝土之间的粘结性能以及钢绞线在聚合砂浆中的粘结锚固性能。
In addition, the higher alcohol acrylate polymer was prepared, the pour point depression performance of the polymer was investigated.
同时制备了丙烯酸高碳醇酯的聚合物，并对聚合物的降凝性能进行了探讨。
The performance of polymer light-emitting diodes was optimized by dispersing titania nanotubes into different functional layers.
在聚合物电致发光器件中，通过在不同功能层中掺杂二氧化钛纳米管来改善器件的性能。
High performance mineral polymer can be prepared while the content of sodium silicate in the alkaline liquid and the standard sand in the solid materials are both kept around 70%.
硅酸钠水玻璃在液相中的比例约为70%，且标准砂占固相的比例为70%左右时，可制得力学性能良好的矿物聚合材料。
Optimizing parameters of electrodes could improve the electrochemical performance of polymer Li-ion batteries.
优化电极参数可以提高聚合物锂离子电池的电性能。
The homogeneous dispersion of nano-particles and processing of high-performance polymer nanocomposites still is a technical challenge due to the high active surface of nanoparticles.
纳米材料的高表面活性使其易于团聚，这为其分散和高性能纳米复合材料的制备工艺带来挑战。
The results show that the texture of monomer and polymer are the type of nematic liquid crystalline, and the polymer has good liquid crystal performance .
结果表明，单体和聚合物均呈现向列型液晶织态结构，聚合物在较宽的温度范围内有很好的液晶性。
Introduce the classifications, preparation method of smart polymer membranes, and introduce the response performance and its applications of some typical smart polymer membranes.
了解智能高分子膜的分类和制备方法，几类智能高分子膜的不同响应性及其应用领域。
A vapor phase filming process for PARYLENE a new high polymer material in Airborne Electronic Equipment and its excellent protection performance are introduced.
介绍一种用于机载电子设备上的新型高分子材料Parylene的汽相成膜过程和优良的防护性能。
The latest advances of the application of grafting on the modification, preparation and high performance procedure of polymer membrane were reviewed.
对接枝技术在聚合物分离膜的制备、改性、功能化和高性能化等领域的应用进行了总结。
The latest advances of the application of grafting on the modification, preparation and high performance procedure of polymer membrane were reviewed.
对接枝技术在聚合物分离膜的制备、改性、功能化和高性能化等领域的应用进行了总结。
应用推荐