A new rigid-rod high performance polymer fiber, called commercially M5, has been developed by Akzo Nobel.
介绍了一种新型的刚性高性能聚合物纤维，商品名为M5。
In asphalt pavements, wood fiber can't be recycled; polymer fiber is expensive; basalt fiber need import. According to these problems, alkaline mineral fiber was found.
针对沥青路面中木质素纤维不能再生、聚合物纤维价格高、玄武岩纤维需进口的缺点，研发出了碱性矿物纤维。
Abstract: : According to the test of evaporative air handing units, it was consisted of an inertial coarse filter, bag type filter, the hydrophilic polymer fiber filler, double fan.
以一台蒸发冷却空气处理机组为测试对象，该机组设有惯性粗效过滤器、袋式中效过滤器、亲水性高分子纤维填料、双风机。
The paper shows some of the unique advantages of polymer fiber in CPN communications, this paper also provides one typical application example of the intelligent home network using polymer fiber.
列出了聚合物光纤在用户驻地网中通信中的独特优势，而且给出了聚合物光纤在家庭智能网络中的一个典型应用实例。
Fiber is mostly made up of a polymer called cellulose, which is not digested because humans do not have the necessary enzymes to process it.
膳食纤维主要成分是一种叫做纤维素的聚合物。由于缺少必需的消化酶，人类无法消化纤维素。
The car is also made of strong yet lightweight carbon-fiber-reinforced polymer, which makes it about 220 pounds lighter than an equivalent aluminum design.
由于车体使用坚固且轻质的碳纤维加固合金材料，因此该车比同类的铝材料设计约轻220磅。
Some problems existed in single type of fiber reinforced polymer (FRP) used for strengthening concrete are pointed out.
指出单一纤维复合材料(FRP)加固混凝土存在的若干问题。
The variation rule of mechanical property of steel fiber concrete by adding polymer is described.
文中还阐述了掺聚合物后引起钢纤维混凝土力学性能变化的规律。
We proposed fabricating polymer segmented-cladding fiber by bicomponent spinning is proposed.
提出了采用复合纺丝法制备瓣状聚合物光纤的新思路。
The characterization of clusters in rare earth-doped polymer optical fiber (POF) was studied in this thesis.
本文主要研究了稀土掺杂聚合物光纤的团簇特性。
Polyester is a synthetic fiber in one important species, is the trade name of China's polyester fiber, fiber-forming polymer through the spinning and post-processing made fibers.
涤纶是合成纤维中的一个重要品种，是我国聚酯纤维的商品名称，成纤高聚物经纺丝和后处理制成的纤维。
The facade is made of glass fiber-reinforced polymer panels, piled to suggest boulders.
外表面是由玻璃纤维增强聚合物板建成的。
Numerical and experimental studies of cross sectional optical power distribution (OPD) in polymer optical fiber under offset launch are given.
研究了偏心激励多模聚合物光纤横截面的光功率分布。
The feasibility for producing high shrinkage acrylic fiber polymer by existing process was studied.
分析探讨了采用现有工艺生产高收缩腈纶聚合物的可行性；
In this paper an overview of the formation, determination and various theoretical analysis methods of residual stress on the fiber-polymer interface is presented.
本文综述了聚合物基纤维复合材料界面残余热应力的形成、测定方法和各种理论分析方法。
This paper makes experimental study of stress character of reinforced concrete beam's oblique section in negative area strengthened with U-jackets carbon fiber reinforced polymer (CFRP).
研究了外部U形粘贴碳纤维布加固钢筋混凝土梁负弯矩区段斜截面的受力特性。
Based on an analysis of rheology and mass transport principle, a mathematical model was formulated for describing the co-extrusion and diffusion process of graded index polymer optical fiber (GI POF).
基于流变学原理和质量传递原理的分析，建立了一个能够描述渐变型聚合物光纤(GIPOF)共挤扩散制备过程的数学模型。
The spinning technology of fabricating polymer segmented cladding fiber by bicomponent spinning is studied in this paper.
文中对复合纺丝法制备聚合物瓣状光纤的纺丝工艺进行了研究。
Viscosity is a general parameter reflecting the molecular weight, molecular weight distribution, and polymer solution concentration of acrylic fiber.
粘度是反映腈纶分子质量、分子质量分布和聚合物浓度的一项综合参数。
An explorative test has been made on anti metal jet properties of fiber polymer composites, ceramics and concrete composites.
对陶瓷材料、树脂基纤维复合材料及混凝土复合材料进行了抗金属射流的探索性试验。
In this paper, an overview of the formation, determination and various theoretical analysis methods of residual stress at the fiber - polymer interface is presented.
本文综述了聚合物基纤维复合材料界面残余应力的形成、测定方法和各种理论分析方法。
In this paper, a review on the prepairing technology of the monomer, polymer and fiber of PTT and their properties have been given, and the application future of PTT fibers has been discussed.
主要介绍聚对苯二甲酸丙二酯（PTT）的单体、聚合体和纤维的制备方法及其性质，并对PTT纤维的应用前景进行了探讨。
The system can also be applied to measurement of numerical aperture of polymer optic fiber and characterization of the refractory index distribution.
该系统也可实现聚合物光纤数值孔径的测量和折射率分布的表征等。
A constitutive model test on glass fiber reinforced polymer (GFRP) tube confined concrete was carried out.
进行了玻璃纤维增强塑料(GFRP)管约束混凝土本构模型试验。
To solve this problem, fiber-reinforced polymer (FRP) tendons and reinforcing bars (rebars) have been developed to alternate to steel reinforcement in recent yeas.
为解决这一问题，作为钢筋替代产品的纤维增强聚合物(FRP)筋材的开发研究近几年在国内外已蓬勃兴起。
A kind of microstructured polymer optical fiber with elliptical core has been fabricated by adopting in-situ chemical polymerization technology and the secondary sleeving draw-stretching technique.
采用化学原位聚合技术和套管法二次预制棒拉丝技术，成功制备了椭圆芯微结构聚合物光纤。
Resin transfer molding(RTM) is one of the important processes for fabrication of fiber-reinforced polymer-matrix composites.
树脂传递模塑工艺（RTM）是纤维增强聚合物基复合材料的重要制备工艺之一。
Base on an engineering, this text introduce the application of technology for strengthening with carbon fiber reinforced polymer laminate in concrete frame beam strengthened for shear resistance.
本文根据工程实际情况，简要介绍了碳纤维片材加固技术在混凝土框架梁抗剪加固工程中的应用。
The critical bending radius of PMMA polymer optical fiber is measured, By using grating monochromator, the exiting spectrums of the mode filters with different dimensions are measured.
对聚甲基丙烯酸甲酯(PMMA)芯聚合物光纤的临界弯曲半径进行了测试，利用光栅单色仪对采用不同尺寸滤模器的光纤出射光谱进行了测量。
The critical bending radius of PMMA polymer optical fiber is measured, By using grating monochromator, the exiting spectrums of the mode filters with different dimensions are measured.
对聚甲基丙烯酸甲酯(PMMA)芯聚合物光纤的临界弯曲半径进行了测试，利用光栅单色仪对采用不同尺寸滤模器的光纤出射光谱进行了测量。
应用推荐