The working principle and characteristics of the pneumatic test rig by applying the three kinds of control methods were introduced respectively.
文中详细介绍了采用三种控制方式的气动实验台的工作原理及其特点。
The test consists of increasing air pressure system, workpiece pneumatic locating system, measuring system, electrical controlling system and so on.
该试验台主要由气源增压系统、工件气动定位系统、测量系统和电气控制系统等组成。
Maintain, repair, test and install electrical motors, generators, alternators, industrial storage batteries and hydraulic and pneumatic electrical control systems.
维护，修理，测试和安装电动机，发电机，交流发电机，工业蓄电池和液压和气动电气控制系统。
This paper presents the features of the series B in-situ pneumatic regulating apparatus and its pilot test at Nanjing Cogeneration Powerplant.
本文介绍了b系列气动基地式调节仪表的特点及其在南京热电厂的中间试验情况。
The developing steps of simulation test software, test interface and flow chart of its applying procedure are introduced through an example of pneumatic supplies selecting device.
以气动物料分拣装置为例，深入分析了仿真测试软件的开发步骤，详细介绍了相关的测试界面、仿真应用程序流程图。
A measuring system is studied to test coupled pair in oil nozzle of engines by means of the pneumatic sensing method and the diffused silicon pressure sensor.
研究了利用压力位移气动传感方法和以扩散硅压力传感器组成测试系统对发动机喷油嘴偶件进行检测。
This paper presents the design of pneumatic switch and the pneumatic control system as well as the application of pneumatic switch in HV test apparatus.
文中介绍了气动开关结构设计和气动控制系统，及其在高压试验设备中的应用。
Isothermal chamber is a new kind of measuring installment used to test pneumatic component flow rate characteristics.
等温容器是一种新型气动元件流量特性测量装置。
A new pneumatic switch was developed in order to meet the requirements of special electric test for simulated oil-impregnated paper insulation system.
为满足油纸绝缘模拟结构的特殊电气性能试验的要求 ，研制了新颖的气动开关。
The simulated data tallies with the test data, and the feasibility of the 3-d numerical simulation is verified for fan pneumatic design.
模拟结果与试验结果基本吻合，验证了三维数值模拟对于风机气动设计的可行性。
The design of pneumatic system and CAT system for integrative test stand are systematically presented in the paper.
本文较系统地介绍了测试台气动系统和CAT系统的设计。
The upsetting test of metal powder sintered preform by blow speed of the hydraulic press, crank press, pneumatic hammer and high energy rate forging hammer was reported.
研究了用液压机、曲柄压力机、空气锤及高速锤的打击速度对粉末冶金烧结体进行的镦粗试验。
Hydraulic and pneumatic transmission test system which controlled by PLC and Relay are in this lab.
本实验室配备PLC和继电器控制的透明液压传动实验台和气动实验台。
Maintain, repair, test and install electrical motors, generators, alternators, industrial storage batteries and hydraulic and pneumatic electrical control systems.
维修，安装，检测电动机，发电机，交流发电机，工业蓄电池，水力和风力电控系统。
With this test system, not only automatic control degree but also accuracy and reliability in the test of electro pneumatic brake are improved.
采用该测控系统测试机车电空制动机，不但提高了测试系统的自动化控制程度，而且提高了测试系统的精度和可靠性。
The test results show that the electro-pneumatic proportional valve based on PWMtechnology features smooth performance and conforms to the requirement by electro-pneumatic braking system.
试验结果表明，采用基于PWM技术的电空比例阀具有较好的性能，能够满足电空制动系统的要求。
To test the dynamic property, this pneumatic fatigue test system was identified by a recursive BP neural network.
为了考察该系统的动态性能，采用递归BP神经网络对该系统进行辨识。
The paper analyzes the pneumatic pump for SN-ratio test by use of the direct-product of internal and external tables , and has determined the optimal parameters.
采用内、外表直积法，对风动水泵进行了SN比试验分析，确定了其最佳参数组合。
Many important data are obtained with th is test. It provides a new approach to study the other property of vehicle with hydro pneumatic suspension.
用这种试验的方法同时获取了许多重要的数据，为研究采用油气悬架车辆的其它性能提供了一种新的途径。
This paper described the PLC application in the pneumatic-electrical control of the test of swivel chair mechanical property.
介绍了可编程控制器在转椅力学性能试验机的气-电控制系统中的应用。
Experiments of dense-phase pneumatic conveying for pulverized coal with different mean particle size were carried out on the test rig of high pressure dense-phase pneumatic conveying.
在高压密相气力输送试验台上，进行了不同平均粒径煤粉的密相输送试验。
I pneumatic leak test at a pressure of not less than 6 bar after assembly of all tank valves and fittings.
气阀及配件装配后不少于6巴压力的气压测漏报告。
The matching test for F8 electro pneumatic brake and U5A empty and load adjustment valve is described. The testing results are analysed. The matching parameters and mounting plan are put forward.
介绍了F8电空制动机与U5A空重车调整阀的匹配试验情况，对试验结果进行了分析，提出了匹配参数及装车方案。
In this paper, the structural characteristic and performance test of the rotating cylindical pneumatic dryer with a crushing device are introduced.
介绍了回转破碎气流干燥设备的结构特点及其性能试验。
The test results showed that the ISD was more effective than the pneumatic drying, the drum drying and the oven one.
试验结果表明，在本试验范围内，对撞流干燥所得的产品品质比气流干燥、烘箱干燥、滚筒干燥的效果好。
By using reliability design method, the reliability range of virgin static strength of spherical vessel was quantitatively analyzed under the most severe pneumatic and hydraulic test conditions.
应用可靠性设计方法，对压力试验时钢制薄壁内压圆筒形容器初始静强度的最小可靠度进行了定量分析。
Based on the conventional life test of a small high-speed pneumatic cylinder, a failure model is determined through failure mechanism analysis.
以某小型高速气缸白勺常规寿命试验为基础，通过对气缸白勺失效机理分析，确定其失效模型。
The system simulation and practical physical simulation test show, that the time response of the digital control system is better than that of hydro pneumatic control system.
系统仿真和半物理模拟试验表明，数字控制系统的时间响应，在相同干扰情况下，优于气动液压式控制系统。
Conduct an immediate analysis on the measuring repeatability and reproducibility of Pneumatic dimension test machine.
立即对气动量仪进行量具重复性和再现性分析。
Conduct an immediate analysis on the measuring repeatability and reproducibility of Pneumatic dimension test machine.
立即对气动量仪进行量具重复性和再现性分析。
应用推荐