A set of electric control system of unit emergency stop device controlled by PLC was designed.
设计出一套由PLC进行控制的紧急事故停机装置电气控制系统。
In this paper the author introduces the development of the experiment device for PLC Control Technology and describes how to arrange the experiment contents.
本文介绍了PLC控制技术教学实验装置的开发，以及实验内容的设置。
A monitoring and control system composed of S7 - PLC and Industrial PC for cement dry mixing device and its design and implementation on software and hardware are introduced in detail.
较为详细地介绍了一个由S7-PLC和工业PC组成的油井水泥干混装置监测、控制系统及其软、硬件的设计与实现。
The middle layer is composed of the field control unit device PLC with Ethernet interfaces.
中间层由带以太网接口的现场控制单元设备PLC组成；
A molding control device is designed using Programmable Controller (PLC) as a primary controlling component.
本文采用可编程控制器(P LC)为主要控制元件，研制出一台成型控制装置。
PLC is a new kind of advanced industrial automatic control device.
PLC是一种新型的工业自动控制装置。
The use of PLC in the fly ash pneumatic removing device control system in power plant is detailed in this paper.
本文详细介绍了PLC在电厂气力除灰装置控制系统中的应用。
PLC intelligent control system, Device control program run by automatic, Intelligent touch screen operation, The running state of the equipment is stick out a mile.
采用PLC智能控制系统，设备控制按自动程序运行，智能触摸屏操作，设备运行状态一目了然。
A distributive configuration PLC system was used as control terminal of the detection device, while a relay loop as a redundancy control system.
设计一种基于光电池的核废料沉淀罐沉淀界面位置检测装置，采用分布式组态plc系统作为控制终端，继电器控制回路作为冗余控制系统。
In the procedure of control ling system for ash pneumatic removing device in power plant, the overall function chart is acquired and the PLC control program is also provided.
介绍了电厂气力除灰装置控制系统中，用PLC控制的总体功能图，并给出了控制程序。
This paper puts forward the plan of installing the anti-collision device, and reform the PLC logic control program of cab, which enhances the safety of the cab of the ship unloader.
对原驾驶室设计缺陷进行分析后，提出了加装防撞装置的方案，并对驾驶室PLC逻辑控制程序进行了改造。提高了卸船机驾驶室的安全性。
The article expound a kind of position control system that is made up of high speed pulses counter, PLC and light cell code device.
文章介绍的是采用由高速脉冲计数器、PL C和光电增量编码器构成的位置环控制系统。
Two level control combining IPC with PLC is adopted in the system. High voltage ignition device is designed rationally. Automatic control of sintering ignition is realized.
系统采用工控机和PLC相结合的两级控制，并且合理设计了高压点火装置，实现了烧结杯点火的自动控制。
Through withdraw material and give material device to divide into three processes, the electric automatic control system of the production line is offered by programmable controller PLC.
冲床通过提料和送料装置分三道工序，用复冲模冲冲出定子冲片和转子冲片，生产线的电气自动控制系统由可编程控制器PLC提供。
The application of PLC in speed adjustment of fin stabilizer is introduced in this paper. This system USES PLC as the central device to achieve digital control of sensitivity adjustment of speed.
介绍了PLC在减摇鳍装置航速调节中的应用，以PLC为控制核心实现装置的航速灵敏度调节的数字化处理。
Microprocessor-based governor is an important device in the hydraulic turbine control system. Recent years, the PLC technology has been widely applied in the field.
水轮机微机调速器是水轮机控制系统中的重要设备，近几年PLC在此领域得到广泛的应用。
The programmable controller was PLC is the grand total computer technology, the automatic control technology and the communication one kind new, the general automatic control device.
可编程控制器即PLC是综和了计算机技术、自动控制技术和通信技术的一种新型的、通用的自动控制装置。
Programmable logic controller(PLC) is a kind of automation device with microprocessor and memorizer as its control center, which plays a more and more important role in the field of industry.
可编程控制器（PLC）作为一种以微处理器及其存储器为控制中心的自动化装置，在工业自动化控制领域发挥着越来越重要的作用。
A new mechanical systems design of strip cutting device in tobacco system was presented, and the control system of its was designed by use of PLC.
提出了一种烟草系统中新型剪带装置的机械系统方案设计，并利用PLC设计了该装置的控制系统。
The results show that workpiece turnover is achieved well by using hydraulic transmission system controlling the motion of mechanical device and combining PLC and computer control.
结果表明，利用液压传动系统控制机械装置的运动，并与可编程控制器和计算机控制等结合，可以很好地实现工件的翻转。
Using TD200 and PLC to control feeding system of punch makes up a digital control mechanical and electronic device, which is efficient and economic.
通过TD 200组态以及PLC控制程序对冲床进料系统进行控制，构成一个高效的经济型数控机电一体化装置。
It employs PLC control system and touch screen menu operation; it is very simple to operate it. Its main parts of device use the imported ones.
采用PLC控制系统，触摸屏菜单操作，简单易懂。本机主要部件采用进口原件。
Features: PLC programming, equip with Japan Miyachi CT-110 welding control device, three segments electrification method, with current slow increasing and slow dropping function.
特点：采用PLC程控，配置日本米亚基ct- 110焊接控制器，三段通电方式，具有电流缓升缓降功能。采用焊接变压器次级反馈控制电流及导通角控制。
OPERATIONAL EQUIPMNT Double Winder, Die Rotating Device, Tension Auto Control System, PLC Control System, Air Shaft, Auto Unloader Device, Two or Three-Layer Coextrusion Blownand etc.
特殊配置双收卷机、旋转模头、自动张力控制系统、PLC可程式控制系统、气压收卷轴、自动卸料装置、二至三层共挤。
OPERATIONAL EQUIPMNT Double Winder, Die Rotating Device, Tension Auto Control System, PLC Control System, Air Shaft, Auto Unloader Device, Two or Three-Layer Coextrusion Blownand etc.
特殊配置双收卷机、旋转模头、自动张力控制系统、PLC可程式控制系统、气压收卷轴、自动卸料装置、二至三层共挤。
应用推荐