Compared with brush plating Ni, brush plating Fe has more advantages as low cost and high hardness.
刷镀铁与刷镀镍相比具有成本低、硬度高的优点。
The process of the brush plating Ni, the microstructure and the properties of the plating layer are studied and analyzed.
研究了电刷镀镍的工艺、镀层微观形貌与镀层性能。
The formation and growth kinetics of the intermetallic compounds through reaction between liquid Zn and low carbon steel containing Si which is treated by electroless pre-plating ni are analyzed.
采用预镀镍的方法，研究了含硅低碳钢预镀镍后与液态锌的反应以及金属间化合物组织的形成和变化规律。
Aluminium is the hard plating metal, there is no plating liquid to aluminium material direct chemical ni - p.
铝是一种难镀的金属，没有适合铝材直接化学镀镍的镀液。
A method to prepare one dimensional nanoscale composite based on coating of carbon nanotube with Ni by electroless plating is proposed.
利用化学镀方法在纳米级碳管表面化学镀镍，得到新一类一维纳米复合材料。
A simple technology applying A-1 additive to Ni-Mo alloy plating is introduced in this article.
介绍采用A - 1添加剂进行黑镍(镍钼合金)电镀的简便工艺。
The paper has made a study with laboratory method on the effect of chemical plating of Ni on the thermal fatigue property of cast iron.
采用实验室手段探索了表面化学镀镍对提高铸铁热疲劳抗力的作用。
Then, black Sn-Ni alloy plating and ti carbide ion plating, quite well received currently, are discussed.
其次是黑色镀层，探讨了目前较受欢迎的电镀黑色锡镍合金及离子镀碳化钛。
The plating (layers) such as Ni, Cu and Ni-Cu formed on the CNTs surface by chemical plating process were investigated.
应用化学镀层法对改性后的CNT镀镍、铜及镍铜混合镀层技术进行了一系列研究。
The process of Ni-P nanometer diamond composite electroless plating was studied. The structure and hardness of the composite coating were analysed.
研究了化学复合镀纳米金刚石粉的不同施镀工艺，并分析了复合镀层的性能和结构。
Ni B plating possesses good weldability and conductivity, and the electrode loss is lower than that of silver electrode. It may be used instead of silver plating.
镀层具有良好的可焊性和导电性，其电极损耗低于银电极损耗，可作为代银接触镀层。
Finally steel balls millstone covering with Ni-Fe-diamond composite electro-brush plating film is produced successfully.
成功的试制成了覆盖有镍-铁-金刚石复合电刷镀层的钢球研磨板。
This paper presented putting use of the wasted mud residue of plating Zn-Ni alloy to reclaiming bath by chemical deposition method.
本文叙述了化学沉淀法处理电镀锌镍合金废水所得到的污泥回槽利用问题。
Counter-flow spray technique for the treatment of the rinsing water containing pyrophosphates in Cu- Sn-Ni alloy plating is described.
电镀焦磷酸盐铜锡镍废水由“常流水”清洗方式改为反喷淋清洗方式。
Methods of removal of NI-P plating layers and typical formulations of Ni removers here briefly presented.
简要介绍了Ni-P镀层的退除方法和研究概况以及典型的除镍剂配方的比较。
MOVABLE BLADE: Stainless Steel, Ag over Ni plating.
动刀：不锈钢，对镍银电镀。
So the Ni-B formed in nickel plating has the strong points of fastness, conductivity.
因此在镀镍时形成的Ni - B镀层具有坚牢度高、导电性好的优点。
The experimental results show that corrosion resistance and combinative ability of the Ni-P alloy electro-brush plating coating are excellent.
结果表明，镍磷合金镀层具有优良的耐蚀性和良好的结合力。
Influences of the metallizing technologic conditions, Ni plating and subsequent annealing on the joint shear strength were investigated.
考察了金属化工艺、镀镍及镀后热处理对接头剪切强度和钎焊效果的影响。
In conventional brush plating, Ni plate is used to replace Cr one, but the former is not as good as the latter in wear resistance, hardness and so on.
过去电刷镀都用镍镀层代替铬镀层，但镍镀层的耐磨性、硬度等性能不如铬镀层。
The optimized immersion gold plating bath contains an organic additive which can slow down initiatory deposition rate, result in a slow dissolution of Ni-P substrate.
此工艺含有能够减缓镀金初始时沉积速率，又能降低对镍层腐蚀的添加剂。
The thickness ratio of high and medium phosphorus layers in double Ni plating layer was optimized.
优化了双镍层中的高磷镀镍层与中磷镀镍层的厚度匹配。
The chemical Ni P plating mechanism in acid baths and the major aspects which influence the plating rate and P content of Ni P alloy coatings were discussed.
从镍磷化学镀的反应机理出发，讨论了反应中影响磷沉积速率和镀层中磷含量的主要因素，试验制备了含磷量较高且抗蚀性良好的镍磷镀层。
An applied formula of electroless ni plating for aluminium alloy and steel was developed according to production practice.
针对生产实践，提出了一种铝合金及钢铁件化学镀镍配方。
Based on Zinc and Zn-Al alloy mechanical plating, a new Zn-Ni alloy mechanical plating process is developed through adjusting type and dosage of activators and promoters.
在机械镀锌、锌铝工艺的基础上，通过调整活化剂和促进剂的种类及用量，研制开发了机械镀锌镍合金工艺。
This text simply introduce the technology for Sn-Ce-Ni alloy electroplating. Plating solution is stable. Coat quality is good.
本文简要介绍锡铈镍合金电镀工艺。本工艺镀液稳定，电镀层质量好。
Suitable com- pound Ni electroplating or electroless Ni plating solution were chosen to make low stress Ni layer.
采用合适的电解镍液或化学镀镍液的配方来制取低应力镍层；
Suitable com- pound Ni electroplating or electroless Ni plating solution were chosen to make low stress Ni layer.
采用合适的电解镍液或化学镀镍液的配方来制取低应力镍层；
应用推荐