In the test the solder ability plating coating.
在测试电镀镀层的焊锡能力。
All kinds of electric plating coating agents and environmental hang out with retreat plating.
各种电镀层退镀剂及环保型挂具退镀剂。
The metal products do for plating coating metal cation cathode, formed in the metal surface coating reduction.
待镀的金属制品做阴极，镀层金属的阳离子在金属表面被还原形成镀层。
Light plating: in the right conditions, can be obtained directly from the plating slot have burnish of plating coating.
光亮电镀：在适当条件下，从镀槽中直接得到具有光泽镀层的电镀。
This method can be used to measure the interfacial toughness of Cr-plating coating with the help of just one buckling unit.
该方法只需对一个屈曲单元的最大屈曲高度和屈曲半长进行测量，就可给出界面韧性。
Surfactant, mechanical and ultrasonic technique are applied together to diverse nano-particle among composite electro-brush plating coating.
本文选用表面活性剂、恒温磁力搅拌和超声波相结合的方式，对复合镀液进行分散。
The experimental results show that corrosion resistance and combinative ability of the Ni-P alloy electro-brush plating coating are excellent.
结果表明，镍磷合金镀层具有优良的耐蚀性和良好的结合力。
The variation of concentration of main salt in electrolyte affects the quality of metal coating obviously, and it is for alloy plating coating as well.
在电镀过程中，镀液主盐离子浓度的变化对镀层的影响极大，对合金电镀更是如此。
Copper and plastic coefficient of expansion, and, therefore, more close to the plastic used in electroplating electroless copper plating coating layer as conductive.
金属铜与塑料的膨胀系数比较接近，因此，在塑料电镀中常用化学镀铜层作为电镀的导电镀层。
The oxiding behavior of the ion-plating coating is difference from metal aluminum. The initial oxygen absorption and oxiding rates are much paster than of aluminum metal.
铝镀层初始氧化行为与金属铝不同，铝镀层表面初始吸附、氧化速度快于金属铝，钝化能力比金属铝强。
The invention also provides a manufacturing method for copper-based antifriction compound powder which comprises: A. the step of preparing chemical copper plating coating graphite powder;
本发明还提供一种铜 基减摩复合粉末的制造方法，包括：A。制备化学镀铜包覆石墨粉步骤；
Due to the plating coating has very low surface radiation ratio, low radiation, high transmission, infrared, prevent ultraviolet function, prevent winter and summer season indoor heat exchange.
因其所镀的膜层具有极低的表面辐射率，具有低辐射、高透光、防红外线、阻止紫外线功能，有效防止冬夏季节室内外热量交换。
Copper plating, improve electricity with: render coating adhesion ability, and corrosion ability.
镀铜：打底用，增进电镀层附着能力，及抗蚀能力。
Any plating must have a can produce normal coating the current density range.
任何电镀都必须有一个能产生正常镀层的电流密度范围。
Current density: unit under the plating area under current, usually the higher current density film thickness is thicker, but is high coating will scorched thick dry.
电流密度：单位电镀面积下所承受的电流，通常电流密度越高膜厚越厚，但是过高时镀层会烧焦粗燥。
Also coating operations such as plating or painting are straightforward due to a good surface, which needs very little preparation.
另外由于锻件良好的表面，像电镀或油漆之类的涂装工序就很简单，几乎不需要做准备工作。
Resist: coating material used to mask or to protect selected areas of a pattern from the action of an etchant solder or plating.
阻剂：用来选择性保护某图形区域免受蚀刻剂，焊料或电镀影响的涂层材料。
Black tin coating was prepared by multi-arc ion plating technology and wear resistance corrosion resistance heat-proof property and absorption property of solar spectrum were also discussed.
摘要介绍了利用多弧离子镀工艺制备黑色氮钛膜，并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
In some cases, if the salt solution of the metal ion content for simple ion, the coating, therefore, coarse grains to adopt complexation ion of plating solution.
有些情况下﹐若镀液中主盐的金属离子为简单离子时﹐则镀层晶粒粗大﹐因此﹐要采用络合离子的镀液。
After Plating, cleaning the coating with the corresponding removers.
电镀后，请用相应清洁剂除去涂层。
Boeing SOPM guidelines should be followed for the rework of any component and for all types of plating or coating.
应当遵循波音sopm手册对部件进行翻修或电镀或涂漆。
Zinc plating, Power coating and other surface treatment is up to customers' requirements.
镀锌，电涂层及其他表面处理达到客户的要求。
Anyone who is a industrial waste gas, waste gas fuel have pollution atmosphere, zinc coating the corrosion resistance than at sea or plating, cadmium in the ocean in the opposite.
凡属有工业废气、燃料废气污染的大气中，锌镀层的耐蚀性优于镉镀层，在海上或海水中则相反。
The plating baths with different orthophosphate content were analysed, and the corresponding coating characteristic was tested.
对正磷酸根含量不同的镀液进行了分析，并测试了相应镀层的性能。
The environmental adaptability of protective coating and plating in such environment was discussed.
探讨了保护性涂、镀层在这类环境中的适应性。
Multi-Arc Ion plating technology is an improved method of Ion plating and it is a surface coating technology that uses arc as the fountain of vaporizing.
多弧离子镀技术是离子镀技术的一种改进方法，它是把弧光放电作为金属蒸发源的表面涂层技术。
The temperature is too high, serious loss of zinc pot, and then affect the onset of many zinc, zinc immersion coating quality, zinc consumption, or even plating.
温度过高，锌锅铁损严峻，发作很多锌渣，然后影响浸锌层质量，锌耗大，甚至无法施镀。
Water purpose: food and beverage, medicine, concentration, purification, RO pre-treating, coating, recollecting wastewater caused by plating, and table-water manufacture.
产水用途：食品饮料、医药行业工艺浓缩，提纯、RO预处理、涂装、电镀废水回收、矿泉水制备。
A new coating technology, arc discharge ion plating has been developed.
一种新的镀膜技术——电弧放电离子镀研制成功。
A new coating technology, arc discharge ion plating has been developed.
一种新的镀膜技术——电弧放电离子镀研制成功。
应用推荐