The plastic yield condition of frame column is rep - resented in stress resultants.
用广义应力表达了框架柱的塑性屈服条件。
Fracture surface consists of plastic yield deformation area and elastic deformation area.
断口主要分为塑性屈服变形区和弹性变形区两部分。
Through optimization of plastic yield element parameter, The influence of adjoining rock plastic circle is simulated true.
通过对塑性屈服单元进行参数优化，较真实地模拟了地下洞室开挖后围岩塑性圈的影响。
The results show that the great plastic yield areas and pull failure areas are formed in the base structure with caved area extends.
结果表明，随矿岩崩落开采，崩落区下方岩层出现较大范围的塑性破坏区和拉破坏区。
Using plastic yield line theory, three yield line patterns are analysed and the formulas of the ultimate bearing capacity are obtained.
采用塑性铰线理论，对三种可能的塑性铰线形式分别进行分析，得到极限承载力的解析式。
The formulation system is of the characteristics of long mobile time, light settling, small plastic viscosity and yield value, higher compression strength etc.
所研究的水泥浆配方体系具有：可流动时间长、沉降轻微、塑性粘度和屈服值小及凝固后具有较高的抗压强度等特性。
The plastic theory of composite material include three criterions: the yield criterion, the flow rule and the hardening rule.
复合材料的塑性理论通常包括三方面准则：屈服准则、流动准则和强化准则。
It is important to plastic deformation analysis for we to understand correctly the geometrical form and properties of yield function of sintered powder materials.
正确认识粉末烧结材料屈服函数形状和性质，对于其塑性变形分析有重要意义。
This article introduce the "cap yield curve model", simplify the cap yield surface and plastic potential energy surface by ellipse and circle, and get a new justify condition.
本文通过引入帽子屈服曲面，并对帽子曲面和塑性势能曲面用椭圆函数和圆函数形式进行了简化，从而得到了新的判定条件。
To join ellipse yield function, hardening parameter with plastic work, associated flow law and damage theory, the elastoplastic damage constitutive model of loess were derived.
结合以塑性功为硬化参数的椭圆形屈服面，根据相关联流动法则及损伤理论推导出了黄土弹塑性损伤本构模型。
The experimental method for determine the subsequent yield condition of a sheet with plastic prestrain is introduced.
本文介绍了确定具有塑性予应变板材后继屈服条件的实验方法。
The results show that the coatings with good application properties have larger apparent viscosity , higher yield stress , lower plastic viscosity and proper thixotropy at lower shear rate.
实验结果表明，使用性能良好的锭模耐火涂料在低剪切条件下，应具有较大的表现粘度与屈服应力，以及较小的塑性粘度和适当的触变性。
With the increasing of the yield stress, the velocities of Binghamand particle decrease, but with the increasing of the plastic viscosity, the velocities of Binghamand particle increase.
随着塑性粘度的增加，宾汉流体和颗粒相的主流速度分布出现了与屈服应力带来的影响的相反趋势。
Usually yield function is introduced to describe the plastic deformation, however, a new damage function is proposed here to describe the additional deformation due to the damage of soil structure.
塑性变形常用屈服函数描述，损伤变形则可以引入一种类似的损伤函数加以描述。
The general yield load, stress and strain rate ahead of notches of I specimens with larger plastic constraint is larger than that of V specimens with small plastic constraint.
塑性拘束较大的直缺口试样(i)的整体屈服载荷及缺口前的应力、应变和应变率比塑性拘束较小的V缺口试样(V)大。
Because of the lower yield point of rotor material, the local plastic deformations are found during operation at rate speed.
由于转子材料屈服点较低，在额定转速时，局部会出现塑性形变。
Mapping rheogram and analyzing thixotropy of fresh cement paste with different superplasticizers by measuring the rheologic parameters such as shearing stress, yield stress and plastic viscosity.
通过测定不同新拌水泥浆体的剪切应力、屈服应力、塑性粘度等流变参数，绘制流变曲线，分析含不同高效减水剂的新拌水泥浆体的触变性。
It has been verified that plastic potential function is equal to yield function and flow law is the associated flow rule.
经过验证，塑性势函数等于屈服函数，流动规律为相适应的流动法则。
The basic properties of sintered powder materials in plastic deformation are explained. Some defects in present yield criteria of the materials are analysed.
阐述了粉末烧结材料塑性变形的基本性质，分析了粉末烧结材料现有屈服条件中存在的问题。
The yield point represents the dividing line or transition from the elastic to the plastic region of the curve.
屈服点是弹性变形区域到塑性变形区域之间曲线的过渡点。
This paper introduces a data processing method about the low yield neutrons from irradiation drive which are measured at the "Shenguang" facility with a plastic scintillation detector.
本文介绍了在“神光”装置上用塑料闪烁探测器测量辐射驱动内爆低产额中子的数据处理方法。
The famous excellent-quality tea has the character of "early supplement, long harvest period and high yield of fresh leaf and high benefit" in the spring season, when cultivated in plastic greenhouse.
利用塑料大棚覆盖栽培名优茶具有春茶上市期早、采摘期长、鲜叶产量高、效益好等优点。
The effect of loading rate, test temperature and pre-plastic deformation on hydrogen induced apparent yield stress reduction have been investigated.
研究了变形速度，试验温度以及预先塑性变形程度对氢致表观屈服强度下降的影响。
The yield criterion of composite materials is simulated by using the homogenization method of micromechanics and the plastic limit analysis theory.
运用细观力学中的均匀化方法和塑性力学中的极限分析理论，分析了复合材料的屈服准则。
In this paper, the deformation of the axisymmetrical tunnel in soft rocks is studied by using the Mohr-Coulomb yield criterion and non-associative plastic flow rule.
本文采用莫尔-库仑屈服准则和非关联塑性流动法则分析了轴对称软岩巷道的变形规律。
Then, the effects of irrigation in plastic film on cotton yield and quality are analyzed.
在此基础上，分析了膜下灌溉技术对棉花产质量的影响。
Effects of plastic film mulching and pre-sowing irrigation on yield formation of spring wheat.
地膜覆盖和底墒灌溉对春小麦产量形成的影响。
The classic plastic constitutive relation, multi-yield surface constitutive relation and over-stress viscoplastic constitutive relation are a special example of this constitutive relation.
经典塑性本构关系、多屈服面本构关系及过应力型粘塑性本构关系只是本文的特例。
The classic plastic constitutive relation, multi-yield surface constitutive relation and over-stress viscoplastic constitutive relation are a special example of this constitutive relation.
经典塑性本构关系、多屈服面本构关系及过应力型粘塑性本构关系只是本文的特例。
应用推荐