• We had to wear white suits to protect against radiation, a full respirator mask, two pairs of gloves, and plastic booties over our shoes.

    我们必须呼吸面罩,穿上辐射白色防护,戴上手套,还要鞋子外面套上塑料

    youdao

  • For the record: I had to wash my hands (twice) and boots, and wear plastic gloves and a rather flattering hairnet.

    准确情况是:不得不洗手两次靴子并且带上塑料手套一个相当搞笑的发网

    youdao

  • Of course you can have a broken nose or wear a false nose or have plastic surgery but to have nose surgery to change your identity is fairly drastic.

    当然可以打断鼻梁整形手术改变鼻子形状,一般人不会做这种改变形的极端的选择。

    youdao

  • Malnutrition, HIV/AIDS and cancer win over rock stars to the cause and provoke grown-ups to wear plastic bracelets.

    营养不良艾滋病癌症这些摇滚歌星引起青少年的关注。

    youdao

  • The more you sweat, the more fat you burn This myth has encouraged people to work out in extreme heat or wear layers of clothes or rubber or plastic weight-loss suits in the hope of sweating fat off.

    流汗越多,消耗脂肪越多这个错误的观点鼓励人们的环境下运动,或者穿好几层衣服或者穿橡胶塑料减肥希望通过流汗将脂肪排出。

    youdao

  • When working with chili peppers, put plastic bags over your hands or wear plastic or rubber gloves.

    处理辣椒的时候,可以手套穿塑料橡胶手套

    youdao

  • Classic nerds wear plastic pocket protectors that protect their shirts from the ink in their many pens.

    古代书呆子在衣兜里放防水塑料袋以防止漏水衬衫弄脏。翡。

    youdao

  • BPA can leach from polycarbonate plastic bottles when it comes into contact with hot liquids and from regular wear and tear.

    聚碳酸酯塑料水壶接触液体有正常磨损的时候,其中的BPA就会渗出来。

    youdao

  • The micro wear mechanism for PEN is plastic flow and broken of the fiber structure, while that for PI is crack initiation, extending and block fracture.

    PEN薄带微观磨损机理主要纤维组织塑性流动拉断,PI薄带的微观磨损机理裂纹萌生扩张块状剥落

    youdao

  • The adhesive strength of the films to the substrates, diamond-coated tool wear and surface roughness of the workpiece were further studied by turning glass fiber reinforced plastic cylindrical bars.

    通过玻璃纤维增强塑料车削试验,研究了薄膜基体之间附着强度涂层刀具磨损加工工件表面粗糙度

    youdao

  • These methods have been proved very effective in the avoid wear of plastic dies, to extend the lifetime of dies and to improve the quality of plastic products.

    实践证明,这些措施好消除塑料模具磨损现象,从而提高塑料模具寿命生产产品质量

    youdao

  • The worn surface morphology analysis shows that the wear of laser strengthened layers follows the plough trenches way caused by plastic deformation.

    形貌分析可知强化是以塑性变形引起犁沟方式磨损

    youdao

  • Doctor: you will wear a temporary plastic bridge to protect your teeth during that time. If there no delays it will take three appointments to finish your case.

    医生:这一个星期,我会暂时塑料保护牙齿如果没有特殊情况,你次。

    youdao

  • Failure mode of tooth surface is varied such as teeth surface pitting, teeth wear, teeth bonding and teeth plastic deformations and so on.

    齿常见失效形式齿面点、齿面磨损、齿面胶合齿面塑性变形

    youdao

  • The results show that hot-forged cast dies take thermal wear, plastic deformation, thermal fatigue, impact fatigue fracture and brittle fracture as predominant failure patterns.

    结果表明精铸锻模的主要失效形式为热磨损塑性变形、热疲劳裂纹、冲击疲劳破脆性断裂

    youdao

  • Plastic beauty and technical personnel in the successful summarizes the thousands of sets of hot runner system based on the successful development of the: small diameter nozzle wear;

    技术人员成功总结了几千热流系统经验的基础又成功开发直径耐磨喷嘴

    youdao

  • Its main wear mechanisms are plastic smearing, abrasive wear and fatigue spalling.

    磨损机理主要塑性涂抹磨粒磨损疲劳剥落

    youdao

  • Similarly, in compression and homogenization, if uneven plastic molten state of disorder, can cause wear faster. 2, rotational speed should be proper calibration.

    同样压缩段均化段如果塑料熔融状态紊乱不均,也造成磨损增2转速调校得当。

    youdao

  • Monte Carlo method was applied for simulating plastic deformation wear rate of materials under the three body abrasion using ball like abrasive particles.

    根据磨损典型随机过程一特点,运用蒙特卡罗方法模拟球形磨料作用材料塑性变形磨损的磨损

    youdao

  • EHC Global polyurethane rollers offer greater resiliency and wear resistance than plastic or rubber rollers.

    合斯提供聚氨酯滚轮比起塑料橡胶滚轮更具弹性耐磨性

    youdao

  • FRP plastic table surface, which will not leave scratched product, making the product look nice and wear well.

    FRP塑胶台面成品,外形美观耐磨。具备双点组合快速接头,方便快速。

    youdao

  • The results show that the wear of the roller and scale board includes mainly three coexistent mechanisms: cutting wear, plastic deformation wear and brittle-fracture-peeling wear.

    结果表明:显微切削、反复断裂剥落三种磨损机理并存,其中反复塑变磨损为主。

    youdao

  • Again looked down and saw a black old woman wear dirty flower skirt, shaking had gout, fat legs, holding a big plastic bag, walked feebly.

    望,看到穿裙子女人摇晃着生了痛风病拿着一个塑料袋,气息奄奄地走过去

    youdao

  • Work rolls used in cold rolling mills must have outstanding wear resistance and very little plastic deformation.

    冷轧轧机上的工作必须很高的耐磨性低的塑性。

    youdao

  • The M5032 Flush Grid belt with plastic rods provides a longer lifetime and less wear compared with the modular belts with stainless steel rods generally used in this application.

    M 5032塑料冲洗电网提供了一个更长的使用寿命一般应用中使用不锈钢模块化相比减少磨损

    youdao

  • Like the plastic tips on the ends of shoelaces, telomeres help to protect genes against wear and tear.

    像是我们鞋带最末端的一小块塑料一样。端粒可以帮助保护基因免于磨损或者是破裂

    youdao

  • AATCC rapid wear resistance tester, can rapid detection of textiles, paper, leather and plastic flexible material of dry, wet and abrasion resistance.

    AATCC快速耐磨性测试仪快速检测纺织品皮革塑料等柔性材料湿耐磨性

    youdao

  • The specimens made from Bayer tooth, thermosetting plastic, copper base alloy, titanium and its alloy have relatively good wear resistance as well and are thus idea prosthetic materials.

    拜尔热固塑料合金钛合金较为理想牙科修复材料

    youdao

  • The specimens made from Bayer tooth, thermosetting plastic, copper base alloy, titanium and its alloy have relatively good wear resistance as well and are thus idea prosthetic materials.

    拜尔热固塑料合金钛合金较为理想牙科修复材料

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定