And ECAE process was simulated by 3-dimensional-elastic plastic method of finite element.
并对ECAE工艺过程进行了三维弹塑性有限元模拟。
According to the basic design theory, the bridge design method can be divided into: the elastic design method and the plastic method.
钢桥的设计方法按其设计理论大体可分为弹性设计方法和塑性设计方法。
At present, The calculation method of continuous board and beam under vertical loads has two methods: elastic method and plastic method.
目前，对钢筋混凝土连续梁板在竖向荷载作用下的计算，常用的有两种方法，即按弹性方法计算和按塑性方法计算。
As a result of having a unique origin of ideology and history, of the feature of Pen and Ink, Chinese Traditional Ink Painting regards "Pen and Ink" as its key plastic method.
传统水墨画以笔墨作为主要造型手段，是有其独特的思想渊源和历史渊源的，当然这也与笔墨自身的特征不可分割的。
In this research work, the thermal elastic-plastic method is used to analyze the dynamic thermal stress in the stress-frame specimen during its solidification and cooling process.
本研究用热弹塑性方法分析铸造应力框自凝固到冷却过程动态热应力。
The buckling spring method, unfortunately, has long been replaced by the 'rubber dome,' where little sticks on the underside of the keys press down on rubber domes laid on a plastic underlay.
不幸的是，这种“座曲式”结构的键盘早就被“橡胶圆点”式键盘所取代了。后者的键帽下附有小按棒，按键被摁下时按棒就会触动分布在一层塑料薄膜上的橡胶圆点。
The first plant started using the money-saving process in October 2008; since the method cleans any plastic, the company is now working to wash previously unrecyclable auto parts.
2008年10月，第一家厂家开始使用这种节约开支的流程。由于这种方法能清洁任何一种塑料，ECO2公司正致力于环保冲洗从前不能回收的汽车零部件。
Like compression molding, this method is used to form thermoset materials and involves permanently curing the plastic in a mold under heat and pressure.
像压缩成型，使用这种方法，形成热固性材料和涉及永久固化塑料模具在高温下和压力。
The project produced an affordable manufacturing method called electronics on plastic by laser release or EPLaR.
该项目开发了一种可量产的制造方式，叫做激光发送电子着塑技术(electronicsonplasticby laserrelease ，EPLaR)。
Severe plastic deforming behavior and microstructure evolution of two phases in medium-carbon steel during equal channel angular pressing (ECAP) were investigated by experimental method.
用实验方法研究了中碳钢两相组织在等通道角挤压过程中的强烈塑性变形行为和组织演化过程。
Therefore, if the foreign plants adopt plastic extrusion molding for over-voltage crosslinked polythene cable, they currently adopt "plastic extrusion sulfuration by layers" method.
因此国外厂家对超高压交联聚乙烯电缆如果采用“挤塑模铸法”，目前均采取“分层次挤塑硫化”工艺方式。
The liquid chemistry method is applied to modificate the surface of plastic packing and the properties of the modificated packing are tested.
采用液相化学法对塑料塔填料进行表面改性，并对改性后的填料作性能测试。
The result suggest that the method of suture facial trauma with plastic and aesthetic surgical techniques can be used in facial trauma.
面部外伤后采用整形美容外科的方法进行清创缝合是一种理想的方法，能够取得良好的临床效果。
So thermo-plastic precision forming technology has developed into one of the very important and promising new method for mechanical parts machining.
因此，热塑性精成形技术己成为机械零件加工极为重要又极有前途的新方法之一。
The concrete construction method in plastic shed during winter was introduced, its economic benefit was analysed.
论述了冬季扣塑料棚进行混凝土施工的方法，并作了经济效益分析。
Using this method, plastic based DNA extraction chips were fabricated, and the chips were applied to extract DNA from human blood.
利用这种方法制作了塑料基的DNA提取芯片，并将该芯片应用于从人血中提取DNA。
In addition, according to experimental results, slab method in plastic mechanics and material hardening theory, a new formula for hole flanging force is concluded.
另外，根据试验结果，并利用塑性力学中的主应力法和材料硬化理论，推导了一个计算圆孔翻边力的新公式。
With the dynamic explicit elastic plastic finite element method, the unsteady deformation of the bite stage in slab rolling was simulated.
采用显式动力学弹塑性有限元方法，对平板轧制过程中咬入阶段的非稳定变形进行了数值模拟。
Conclusion: the combination of the baggy eyelids plastic and nasolabial furrow rhytidectomy is a micro-trauma method for the orbital region and buccal region rejuvenation with concealed cut.
结论：该术式在同一切口内同时完成眼袋整形术及鼻唇沟除皱术，使眶颊区年轻化，切口隐蔽，创伤小，恢复迅速，是一种较好的手术方法。
Shot Peening(SP)is a typical severe plastic deformation method to produce ultra-fine grains of metallic materials.
高能气动喷丸是通过剧烈塑性变形产生细晶材料的方法之一。
Based on the rigid plastic constitutive equation of lead, the damping force model of lead extrusion damper was deduced from the even plastic deformation energy method.
本文根据铅的刚塑性本构关系，利用均匀塑性变形能法，推导了铅挤压阻尼器的阻尼力滞回模型。
A new calculation method, base the method of equivalent additional plastic loads on modes of vibration superposition method is studied.
研究一种新的计算方法——以振型叠加法为基础的等效附加塑性荷载法。
Simulating the metal plastic forming process by finite element method has become a crucial question in the plastic forming study.
用有限元法模拟金属塑性成形过程已成为塑性成形研究的中心问题。
Concrete structures strengthened with carbon fiber reinforced plastic sheet (CFS) is a new retrofit method in the field of civil engineering.
碳纤维布加固混凝土结构是一种新型结构加固方法。
Wax sealing scion method using wax sealing scion and plastic strips to prevent water loss and scion grafting method interface interface.
蜡封接穗嫁接法即采用蜡封接穗、塑料条包扎接口来防止接穗及接口失水的嫁接方法。
Using an empirical cumulative plastic strain formula, a method for calculating the traffic load induced deformation was proposed.
针对交通荷载作用下软土地基的变形问题，采用累积应变的经验公式计算其累积沉降。
In this paper, the plastic limit method is used to investigate the strength of reinforced concrete slabs in punching shear.
本文用塑性极限方法对钢筋砼板的冲切承载力进行了研究。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
拓展了结构分析有限条法，基于固体力学有限形变理论的更新拉格朗日法（U 。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
拓展了结构分析有限条法，基于固体力学有限形变理论的更新拉格朗日法（U 。
应用推荐