Dynamic plastic buckling of rectangular plates under axial slamming impact is analyzed with the rigidity-plasticity theory.
基于刚塑性理论分析了轴向砰击载荷作用下矩形薄板的塑性动力屈曲问题。
The strength of the junction may be limited by plastic collapse of the junction or by elastic or plastic buckling of the ring.
转折连接的主要破坏模式包括塑性破坏及环梁的弹性或塑性屈曲。
The finite element analysis software ANSYS was adopted to analyze the elastic-plastic buckling behavior of SPDB with stiffened panel at both edges.
利用有限元软件ANSYS分析了梭形三肢钢管格构柱的几何参数对其弹性屈曲荷载和屈曲模态的影响。
The Category 2 stability(plastic buckling stability) thereof is particularly important because it can truly represent the history of failure of the bridge.
稳定是拱桥设计和施工过程中必须关注的关键性问题，而二类稳定能比较真实地反映拱桥的破坏历程，尤为重要。
This paper presents the experiment and theoretical analysis of plastic buckling of rib and ring stiffened cylindrical shell under uniform external pressure.
本文进行了纵环加筋圆柱薄壳在均布外压作用下的屈曲试验和分析研究。
The elastic plastic buckling analysis is completed on bucking load and buckling mode of thin wall cylindrical shells fully filled with liquid under axial compression.
对充满液体的薄壁圆柱壳经受轴向压缩时的屈曲载荷和屈曲模态进行了弹塑性屈曲分析。
A dynamic plastic buckling analysis of three AMT aluminum alloy circular cylindrical shell with different thickness under external pressure and axial impact is presented in this paper.
本文利用AMT铝合金三种不同厚度的圆柱壳，在常外压和不同轴向冲击载荷作用下的柱壳塑性动力屈曲问题。
The buckling spring method, unfortunately, has long been replaced by the 'rubber dome,' where little sticks on the underside of the keys press down on rubber domes laid on a plastic underlay.
不幸的是，这种“座曲式”结构的键盘早就被“橡胶圆点”式键盘所取代了。后者的键帽下附有小按棒，按键被摁下时按棒就会触动分布在一层塑料薄膜上的橡胶圆点。
Buckling and plastic collapse of the stiffened panels which is composed of the deck, bottom plating and side shell easily causes the overall failure of a ship hull girder.
甲板、船底板、舷侧板和加强筋所构成的加筋板的屈曲和塑性破坏通常容易导致船体梁的总体失效。
The linear dynamic torsional buckling equations for the rigid plastic shell is drived, and the critical impact velocity is given.
文中推导了圆柱壳塑性动力扭转屈曲线性方程，获得了临界冲击速度。
The analysis and contrast of deformation pattern, state of stress, plastic deformation history, plastic limit load and limit load of elastic buckling are analyzed and contrasted.
最后对三种结构型式的拱顶储罐的变形方式、应力状态、塑性变形历史、塑性极限压力、弹性失稳临界压力进行了分析与对比。
In order to study how the static preloading affects on the buckling stability of columns or cylindrical shells, a simple imperfection-sensitive elastic-plastic model is used.
为了研究静力预加载荷对诸如柱、圆柱壳等结构动态稳定性的影响，采用了一种简单的缺陷敏感弹塑性模型。
Wet samples have obvious buckling or plastic deformation, and the phenomenon more obvious with the increase of temperature.
湿态试样的后期会有明显的弯折或塑变，而且随着温度的升高这种现象越明显。
Wet samples have obvious buckling or plastic deformation, and the phenomenon more obvious with the increase of temperature.
湿态试样的后期会有明显的弯折或塑变，而且随着温度的升高这种现象越明显。
应用推荐