The typical equipment, the basic principle and arc plasma process of anodic vacuum arc coating are presented.
介绍了阳极真空电弧镀膜方法的镀膜装置、工作原理及电弧等离子体微观过程。
The greater stability of these power sources allows very low currents to be used particularly for micro-TIG welding and largely replaced the plasma process for micro-welding operations.
这些电源稳定性较好，允许专用于微型TIG焊的电流非常低，可以大量取代等离子方法用于微型焊接作业。
During 30 years of the laser fusion debate, one significant potential hurdle to the process has been the "plasma" that the lasers will create in the hohlraum.
在关于激光聚变30年的争论中，一个重要的潜在障碍就是激光在靶腔内产生的等离子体。
This process separates the collected plasma into specific components, such as albumin and immunoglobulins, most of which are made into medications for human use.
这个过程将收集到的血浆分离成特定的组分，如白蛋白和免疫球蛋白，大部分组分被制成药物给人类使用。
This energy release imbalance, closely related with many process parameters, such as plasma arc compression degree, cutting speed and nozzle to the distance, etc.
这个能量释放的不平衡，与很多工艺参数密切相关，如等离子弧压缩程度、切割速度及喷嘴到工件的距离等。
Plasma produced in laser welding process has shielding effect to the laser beam and decreases the melting depth on even result in the defect.
激光焊接过程中产生的等离子体对激光束有屏蔽作用，降低了焊接熔深，甚至出现缺陷。
The origin of these traps might be due to irradiation damage induced by plasma during insulating layer growth process.
这些陷阱可能是在不同生长条件的介质膜淀积过程中等离子体引进的有关辐照损伤。
Spark plasma sintering (SPS) is a new process of rapid sintering.
放电等离子烧结(SPS)是一种快速烧结新工艺。
This work may be as a useful tool for the understanding of the parameters matching and process optimization in plasma arc welding.
本文的工作对于等离子弧焊接工艺参数的匹配及其过程的优化有重要的指导意义。
So the plasma has great effects on the laser beam welding process, the welding quality and the efficiency of the laser beam energy. Which can not be ignored during the laser beam welding.
可见，激光焊接过程中产生的等离子体对激光焊接过程、焊接质量以及对激光能量的利用率有非常大的影响，是一个不可忽视的现象。
The relation between characteristics of hot cathode glow discharge and diamond film deposition techniques in hot cathode glow discharge plasma chemical vapor deposition process was discussed.
研究了在热阴极辉光放电等离子体化学气相沉积金刚石膜过程中，热阴极辉光放电特性与金刚石膜沉积工艺的关系。
Discharge of plasma generator in electrothermal launchers is a main process of converting electrical energy to heat energy.
在电热化学发射中，等离子体发生器的放电过程是电能转化为热能的重要阶段。
According to this model the instability process in plasma consists of two phases, namely, the thermal explosive phase and the steady annihilation phase.
按照这种模型，等离子体的不稳定过程包含两个相，即热暴发相和稳定湮灭相。
The paper summarizes the characteristic, some application fields and composite process technology of plasma spraying.
综述了等离子喷涂的特点，以及涂层的一些应用领域及其复合处理技术。
Direct metal forming based on plasma arc welding is a novel rapid prototyping process.
基于等离子弧焊的直接金属成形方法是一种新型的快速成形工艺。
The key problem of coking seriously restricts the stable and continuous operation in thermal plasma downer reactor for the coal cracking process to produce acetylene production.
热等离子体煤裂解制乙炔下行床反应器工艺的严重结焦是制约该过程稳定操作与连续运行的瓶颈。
Conclusion: AM and CGRP could play an important role in pathophysiological process of PIH. Associated detection of plasma concentration may be used as indicators for the severity of PIH.
结论：AM、CGRP共同参与妊高征的病理生理过程，联合检测其血浆浓度可以作为监测pih病情的重要指标。
Now that we released the energy, we release now very soon the process of conversion of the plasma into matter.
现在我们揭示了能量，揭示了等离子体转化为物质的原理。
The FGH95 powder was produced with the plasma rotating electrode process (PREP).
采用等离子旋转电极工艺（PREP）制取镍基高温合金FGH95粉末。
A plasma rotating electrode process (PREP) equipment, process parameters and powder forming mechanism were introduced.
介绍了等离子旋转电极工艺(PREP)制粉设备、主要工艺参数和粉末形成机理。
Light emanating from the Galactic Central Sun dissolves the implants. Cintamani stones serve as a focal lens for that Light and they ease the plasma dissolution process.
银河中央太阳发出的圣光可以消除负面植入物。如意宝珠就像是圣光的聚焦透镜，可以加速电浆体的清理。
This paper used a finite-rate method to simulate the three-dimensional combustion process in a plasma generator.
针对等离子点火器内三维湍流燃烧流场，采取有限速率化学反应模型，模拟其物理化学过程。
A measurement method of blood plasma viscosity in the process of blood concreting was researched.
探讨血液凝固过程中一种测量血液粘度动态变化的方法。
The principle, discharge mode and alloying process of double glow discharge plasma surface alloying process were introduced particularly.
详细介绍了双层辉光离子渗金属技术的基本原理、放电模式及渗金属过程。
Based on the thermal guide theory, we analyzed the melting progress with the cylindroid model in the optical fiber LPHVD (laser plasma hybrid vapour deposition) process.
利用热传导理论，结合LPHVD工艺，在圆柱体模型基础上分析了光纤工艺中激光熔融过程。
The eddy-dissipation-concept (EDC) model is used to simulate the three-dimensional combustion process in a plasma generator.
采用涡耗散概念（EDC）模型，对等离子发生器内三维湍流燃烧流场进行数值模拟。
Oxidation resistance coatings prepared by plasma spraying process on the surface of workpiece can improve oxidation resistance.
利用等离子喷涂技术在工件表面制备抗高温氧化涂层，能显著提高工件的抗氧化性能。
Since it USES powder as the coating feedstock, the number of coating materials that can be used in the plasma spray process is almost unlimited.
该设备使用粉末做涂层给料，所以在等离子体工艺中使用的涂层材料的数量几乎是无限量的，是一款您理想的选择。
This paper deals with the surface apparent process of plasma carburizing. The steel 20 and T12 were used.
研究了20钢和T12钢在离子轰击条件下的渗碳和脱碳过程。
This paper deals with the surface apparent process of plasma carburizing. The steel 20 and T12 were used.
研究了20钢和T12钢在离子轰击条件下的渗碳和脱碳过程。
应用推荐