In this article, it introduces the filtration media of plasma coating treatment, and analyses the economic benefits of coating process.
本篇介绍了等离子体涂层表面处理过滤介质，重点分析涂层工艺的经济性。
Interpret and improve specifications for manufacturing process including inspection, grit blasting, plasma coating, epoxy sealing, grinding, super-finishing and laser engraving.
诠释和改善以下各生产工艺的要求和标准：辊子检验、喷砂、等离子喷涂、环氧树脂密封、外圆磨磨削、精密抛光和激光雕刻。
This article reviews the basic physics of ECR discharge and experimental research, and describes new applications of ECR plasma in surface processing, plasma coating and ion source.
本文综述了ECR放电的基本物理过程和实验研究概况，介绍了ECR等离子体在表面处理、镀膜和离子源等方面应用的最新结果。
It is proposed to get the piercing plug sprayed with a plasma coating in a bid to enhance its surface properties, and thus prolong its service life, and cut down the operation costs as well.
提出采用在顶头上喷涂等离子涂层的方法来提高穿孔顶头表面性能，从而提高其使用寿命，降低生产成本。
In addition, the solder mask coating on printed circuit board, with the plasma treatment, can also obtain certain roughness and high active surface, thus improving the solder coating adhesion.
另外，在阻焊膜涂覆前，用等离子体对印制电路板面处理一下，还可获得一定的粗糙度和高活性的表面，从而提高阻焊膜层的附着力。
The influence of bias enhanced nucleation(BEN) to the adhesion between diamond coating and WC-6%Co carbide cutting tool is researched with the microwave plasma (CVD) instrument.
在微波等离子体化学气相沉积装置中，研究了负偏压形核对金刚石薄膜与WC 6 %硬质合金刀具附着力的影响。
However, in view of plasma confinement and its boundary gas recycling, the investigation on the gas desorption behavior of plasma facing material for tungsten coating is very important.
然而考虑到等离子体约束和边界气体再循环，钨涂层面对等离子体材料在真空中的出气性能的研究是十分重要的。
METHODS: The antibacterial hydroxyapatite coating material which contained silver-zirconium phosphate antimicrobial was prepared on the Ti implant by using vacuum plasma spraying technology.
方法：采用真空等离子喷涂技术，在钛基材表面制备含磷酸锆载银抗菌剂的抗菌羟基磷灰石涂层材料。
Study on plasma sprayed nanostructured ceramic coating is one of the present promising fields in nanostructured coating.
等离子喷涂纳米陶瓷涂层的研究是目前纳米涂层领域研究热点之一。
The effect of coating on anti corrosion has been studied, which is formed by laser cladding and plasma spurt welding on metal base of anti acid stainless steel.
研究了在耐酸不锈钢基体上采用激光熔覆和等离子喷焊两种工艺形成的涂层对耐腐蚀性的影响。
The results indicate that the plasma sprayed wollastonite coating has a rough surface and lamellar structure including some pores and microcracks.
结果表明：等离子喷涂硅灰石涂层具有粗糙的表面和层状结构，涂层内部存在一些气孔和微裂纹。
Self-lubricating wear resistant coating is prepared by plasma spraying using chromium carbide, nickel chrome, fluoride-metal, and silver composite materials.
采用碳化铬、镍铬合金、氟化物共晶体和银的复合粉末为原料，通过等离子体喷涂方法制备高温耐磨自润滑涂层。
Plasma sprayed ceramic coatings with good corrosion resistance to liquid zinc were studied. Providinh a new project of liquid zinc corrosion coating by plasma spraying.
研究了等离子喷涂耐液锌腐蚀陶瓷涂层，提出了等离子喷涂耐液锌腐蚀陶瓷涂层的设计方案。
The technical advantages of vacuum plasma spray over conventional chemical vapor deposition(CVD) and air plasma spray in tungsten coating were also discussed.
和CVD方法以及常压等离子体喷涂方法制备的钨涂层相比，低压等离子体喷涂具有明显的优势。
Ta coating was prepared by plasma spraying, which composition and morphology were investigated using SEM, also the bonding strength between Ta coating and Al substrate was tested.
采用等离子喷涂法制备了钽金属涂层，用电子显微镜分析了不同工艺条件下钽涂层的化学成分、表面形貌，测试了涂层与基材的结合强度。
Objective To study cellular compatibility and bone-inducing activity of the plasma sprayed wollastonite coating.
目的研究硅灰石涂层的细胞相容性和成骨诱导能力。
The study on artificial bone of plasma - sprayed hydroxyapatite coating on metal substrates is described in international range.
本文详细阐述了国内外学者对金属基等离子喷涂羟基磷灰石人工骨的研究状况。
The HA gradient coating on ti alloy substrate was developed using PVD and plasma spraying techniques.
采用先进的表面技术复合制备生物活性梯度涂层材料。
Since it USES powder as the coating feedstock, the number of coating materials that can be used in the plasma spray process is almost unlimited.
该设备使用粉末做涂层给料，所以在等离子体工艺中使用的涂层材料的数量几乎是无限量的，是一款您理想的选择。
The typical equipment, the basic principle and arc plasma process of anodic vacuum arc coating are presented.
介绍了阳极真空电弧镀膜方法的镀膜装置、工作原理及电弧等离子体微观过程。
The microstructure of zirconia coating deposited by plasma spraying technique was studied by means of FESEM, SEM, TEM and XRD.
利用透射电镜(TEM)、扫描电镜(sem)和X射线衍射仪(XRD)等分析技术，表征了等离子喷涂氧化锆涂层的显微结构。
The interface between plasma spray hydroxyapatite (HA) bioactive gradient coating and ti 6al 4v matrix was studied using transmission electron microscopy.
用透射电子显微镜对钛合金基体等离子喷涂羟基磷灰石(HA)生物活性梯度涂层的界面进行了观察与分析。
There are some methods that are plasma spraying, arc-spraying and hypersonic flame spraying technology to prepare alloy coating with high erosion and corrosion resistance.
目前制备高性能涂层常用的方法有等离子喷涂、电弧喷涂、超音速火焰喷涂等。
The properties of the composite powders obtained were determined and the plasma spraying experiments were carried out to examine the properties of coating layers.
测定了所获得复合粉末的性能，进行了等离子喷涂试验，检查了涂层的性能。
This article introduces processing of plasma chemistry and application of sputter coating and plasma-enhanced chemical vapor deposition in powder metallurgy especially.
介绍了等离子体化学工艺，特别着重介绍了溅射镀膜与等离子体化学气相沉积在粉末冶金中的应用。
The plasma spraying technique was used to prepare a set of thermal barrier coating specimens, and water-cooling method was used in thermal shock experiments.
用等离子喷涂方法在合金圆柱体上制备了热障涂层，并用水冷的方法进行了热冲击实验，试样的失效现象为轴向的开裂和剥落。
Results indicated that plasma surface metallurgical coating of Fe-Cr-Ni-B-Si had well wettability, and metallurgical bonding was obtained between coating and substrate.
结果表明，等离子表面冶金合金化涂层对基材具有良好的润湿性，基材表面熔化区的形成使得涂层与基材实现了完全的冶金结合。
Surface metallurgy by DC plasma jet is a new coating technology.
等离子束表面冶金是一种新的表面涂层技术。
Surface metallurgy by DC plasma jet is a new coating technology.
等离子束表面冶金是一种新的表面涂层技术。
应用推荐