In this paper, the research for the control system begin with studying controller of variable pitch control system.
本文以变桨距控制系统中控制器的研究为切入点，对控制系统展开了研究。
Study on the ideal model of blade, we can work out the primary parameters of 1.5MW wind turbine's pitch control system.
通过建立理想气动模型的计算，尽可能真实地确定1.5MW的双馈异步发电机组的变桨距设备的主要参数。
First, traditional PID variable variable pitch control system and conventional fuzzy variable pitch control system are established.
本文首先建立了PID变桨距控制系统和常规的模糊变桨距控制系统。
Therefore, to carry out research on the variable pitch control system of wind turbine and its drive system has important significance.
因此，开展对风力机变桨距控制系统及其驱动系统的研究具有重要的意义。
In addition, Ming Yang's self-manufacturing and testing facilities to produce gearbox, generator and pitch control system are progressing as planned.
此外，明阳的自主制造和生产齿轮箱，发电机，变桨距控制系统的检测设施，是按计划进行的。
Here you can customize the pitch of the system bell. For further customization of the bell, see the "Accessibility" control module.
在这里您可以定制系统铃声的音调。要更好地定制铃声，请看“可用性”控制模块。
An improved pitch control scheme is presented by introducing a frequency deviation signal into the control system.
提出了一种改进的桨距角控制方案——将系统频率偏差信号引入桨距角控制系统。
HMR3000 digital compass can provide carrier's real time position data of heading, pitch, roll. So it's adequate for design of ship electronic navigation control system.
HMR3000数字罗盘能实时输出载体的航向、俯仰和横滚三个方向上的姿态数据，因而能满足船舶电子导航在控制系统设计要求。
The traction machine and control system can be installed in any floor, the top floor height and pitch depth can be lower and smaller. It will greatly reduce the construction difficulty.
主机和控制系统可安装于任何楼层，所需的顶层高度更低、底坑深度更小，大大减轻建筑施工难度。
First, wind turbine aerodynamics and variable pitch control process was discussed to provide theoretical studying basis for studying of the system design and control strategy.
首先对风力机空气动力学和变桨距控制过程进行了探讨，为系统的设计及控制策略的研究提供理论基础。
It was verified that the full-decoupling of modes effected by pitch and yaw to roll can be realized for the control system in which there are pitch, yaw and roll three control channels.
证明了具有俯仰、偏航和滚动三个控制通道的控制系统可以实现俯仰、偏航两种运动模态对滚动运动模态的完全解耦。
Every hydraulic system consists of three pitch control cylinders and three pitch safety cylinders, distributed inside hub.
每套液压系统配备三只控制油缸和三只安全油缸，布置在轮毂内。
According to the controlling requirement of megawatt wind driven generator with variable propeller pitch of horizon axis, the hydraulic control system of a variable propeller pitch is designed.
针对兆瓦级水平轴变桨距风力发电机的控制要求，设计了变桨距液压控制系统。
The system operates by a lever (28) which controls a pitch control unit (10) which in turn controls engine speed and also the pitch of propeller blades (12) of propeller (14).
系统通过控制螺距控制单元(10)的杆(28)操作，螺距控制单元依次控制引擎速度和螺旋桨(14)的螺旋桨叶片(12)的螺距。
The design of servo system for pitch attitudes of a mine hunting sonar array was made using frequency domain control and variable structure control respectively.
本文对猎雷艇声纳基阵俯仰角姿态伺服系统分别进行了领域法控制律的设计和变结构控制律的设计。
Through the theoretic analysis in the process about wind turbine, give the target what the pitch-control system must achieve.
通过对风力机组工作状态的理论分析，得出实现这一目标变桨系统所应达到的要求。
A microcomputer control system for a ship controllable pitch propeller (CPP) is presented in this paper.
本文介绍了一种用于船舶调距桨的微型计算机控制系统。
Based on the megawatt wind turbine generator system, the pitch control techniques for large scale wind turbines are deeply analyzed in this thesis.
本文以兆瓦级风力发电机为依托，对大型风力发电机变桨距控制技术进行了较深入的探讨。
The controllable pitch propeller control system based on fuzzy and neural network control is proposed, the result shows that the system design is feasible and effective.
在此基础上提出了基于模糊神经网络控制的调距桨控制系统的设计，仿真试验结果表明了调距桨控制系统设计的合理性。
System digital prototype is established by applying restrictions, then, the kinematic simulations of landscape orientation control, portrait control and collective pitch control are carried out.
通过施加约束建立系统数字样机，实现了横向操纵、纵向操纵和总距操纵的运动仿真。
Fundamental principles and control strategies of pitch-controlled wind induction generator system with rotor current controller (RCC) were presented.
介绍了带有转子电流控制器(RCC)的变桨距调节异步风力发电机系统的基本原理及其控制策略。
Pitch angle control system can change pitch, accordingly regulate the rotational speed and output power by adjusting blade incidence of wind-driven device.
变桨距是通过改变风力机叶片桨距角来改变风力机的转速，从而调整发电机输出功率。
Hydraulic system for wind mill generator is used to perform pitch-control and brake-control, featured by its strong drive-force, prompt response and stable operation.
风力发电机组变桨液压系统用于实现变浆控制和刹车控制，具有驱动力强、响应快速、运转平稳的特点，在整台风力发电机组中充当着重要角色。
Hydraulic system for wind mill generator is used to perform pitch-control and brake-control, featured by its strong drive-force, prompt response and stable operation.
风力发电机组变桨液压系统用于实现变浆控制和刹车控制，具有驱动力强、响应快速、运转平稳的特点，在整台风力发电机组中充当着重要角色。
应用推荐