In order to improve the control effects of the system, adaptive PID fuzzy control algorithm is used for systematic control.
为了改善系统的控制效果，采用自适应PID模糊控制算法对系统进行控制。
The control precision requirements of normal force and shear force are achieved by use of the digital PID fuzzy control method.
采用数字PID模糊控制方式，实现垂直荷载和水平荷载的控制精度；
Compared to the normal PID controller or the fuzzy controller, the finer control result was attained.
比常规的PID控制器或模糊控制器，可以达到更好的控制效果。
The PID fuzzy fusion control in this thesis did experimental research on the controller.
文中所提的PID模糊融合控制即是在本控制器上进行的实验研究。
It is better for the control effect of the boiler with severe lag characters that the burning system of the boiler is under the fuzzy PID control.
采用模糊pid控制方法对锅炉燃烧系统进行控制，对具有大滞后特性的锅炉更具有显著控制效果。
Fuzzy control technology was applied to design a two-input and three-output self - (adapting) fuzzy PID controller to control the water level of boilers.
文章应用模糊控制技术，设计一种二输入三输出自适应模糊pid控制器，对锅炉水位进行控制。
So, this paper combines the advantage of traditional PID controller, in consideration of characteristics of realizing fuzzy control and puts forward the thoughts of the fuzzy PID controller.
因此，结合传统PID控制器的优点，同时，考虑到模糊控制实现的特点，提出了模糊pid控制器的设计思想。
A fuzzy and PID control method is presented for characteristics of density control system.
本文针对密度控制的特点，采用模糊pid控制策略。
Finally, as to the control arithmetic, PID and fuzzy control are colligated to improve the control precision and speed, which is helpful for solving the similar problems.
最后，控制算法方面运用了基本PID控制与模糊控制相结合的控制算法，达到了较高的控制精度和速度，而且对于类似问题的解决具有借鉴意义。
The experiment with PLC shows that the governor with Fuzzy-PID control has such advantages as wide adaptability and good reliability.
通过PLC实现，表明用模糊-PID控制理论构筑的调速器其有适用性广，可靠性高的优点。
The results of experiments show that ac servo system based on fuzzy PID control has quick response speed, high steady accuracy and good robustness.
实验结果表明，基于模糊pid控制的交流伺服系统具有响应速度快、稳态精度高和鲁棒性强等特点。
Fuzzy PID control system is the combination of fuzzy theory and PID controllers.
模糊pid控制系统就是模糊理论与传统的PID控制器的结合。
Finally obtains the fuzzy -pid control method to surpass other idling regime control method.
最后得出模糊- PID控制方法优于其他怠速控制方法。
The results show that this self adjusting fuzzy control method has better control performance than the general fuzzy control and PID control.
实验结果表明，对比常规模糊控制和PID控制，该自调整模糊控制方法具有更好的控制性能。
A fuzzy PID control system is proposed.
提出一种模糊pid控制系统。
Based on the analysis of self-adaptive fuzzy control and the influence of PID control parameter changes, the rules of fuzzy adjustment of PID parameters in a dynamic process are put forward.
在分析自适应模糊控制及PID参数变化对系统性能影响的基础上，提出在动态过程中对PID参数进行整定。
Based on the analysis of self-adaptive fuzzy control and the influence of PID control parameter changes, the rules of fuzzy adjustment of PID parameters in a dynamic process is put forward.
在分析自适应模糊控制及PID参数变化对系统性能影响的基础上，提出在动态过程中对PID参数进行整定。
The experiment results show that the fuzzy PID control system designed in this paper has better control performance than conventional PID control system.
实验结果表明，本文所设计的模糊pid控制系统比常规pid控制系统具有更优良的控制品质。
This paper proposed a control scheme for a metallurgy annealing furnace by means of the PLC and discussed the PID, fuzzy and expert control methods.
提出了采用PLC进行冶金退火炉控制的一种方案，论述了用PID、模糊及专家系统进行控制的方法。
Then it discusses the design of Fuzzy control in details, and it also shows the respective curves of the dynamic response during adjusting the torque under the PID and Fuzzy control.
详细论述了系统模糊控制器设计的方法和思路，并给出了转矩调节在PID控制和模糊控制下的动态响应曲线。
From these results, both fuzzy PID control and fuzzy tune PID control have good control characteristic. The control characteristic of fuzzy tune PID control is best.
结果显示模糊pid复合控制和模糊自整定PID控制均有较好的动静态响应特性，其中模糊自整定PID控制的效果最优。
On the basis of analyzing speciality of VIM's power supply control system, computer control system based on fuzzy PID control is designed.
在分析了真空感应熔炼供电控制对象特性的基础上，设计了基于模糊PID控制的计算机控制系统。
Based on characteristic and principle of the belt conveyer, PID control and Fuzzy control are applied to the belt conveyer respectively.
根据带式输送机的特点和原理，分别采用PID控制与模糊控制算法对带式输送机进行研究。
This paper designs a model autonomous vehicle. Using fuzzy control algorithm, PID control algorithm and improved fuzzy control algorithm, the longitudinal control of autonomous vehicle is realized.
本文设计了一辆模型自动汽车，利用模糊控制算法、PID控制算法以及改进的模糊控制方法实现了自动汽车的纵向控制。
The structure of single neuron PID controller for motion control and the fuzzy adaptive PID control based on BP networks are researched on.
探讨了用于运动控制的单神经元pid控制器的结构与基于BP网络的模糊自适应PID控制。
According to the characteristics of PID control and fuzzy control, a driver model of steering direction control for automobiles is established based on the preview optimal curvature model.
在预瞄最优曲率驾驶员模型的基础上，根据PID控制、模糊控制的特性，建立了加速度反馈模糊—PID控制驾驶员模型。
The simulation results show that the superheated steam temperature control system using this algorithm has better performances than that of fuzzy PID control system.
仿真结果表明，利用该算法设计的汽温控制系统比应用模糊pid控制设计的汽温控制系统具有更加优良的性能。
Characteristics of fuzzy control and PID control are combined; regulation of fuzzy control is used for adjusting parameters of PID controller online, making brake performance improve.
把模糊控制与PID控制的特点相结合，利用模糊控制规则在线对PID控制器的参数进行调节，使系统性能得以改善。
Characteristics of fuzzy control and PID control are combined; regulation of fuzzy control is used for adjusting parameters of PID controller online, making brake performance improve.
把模糊控制与PID控制的特点相结合，利用模糊控制规则在线对PID控制器的参数进行调节，使系统性能得以改善。
应用推荐