Fuzzy control technology was applied to design a two-input and three-output self - (adapting) fuzzy PID controller to control the water level of boilers.
文章应用模糊控制技术，设计一种二输入三输出自适应模糊pid控制器，对锅炉水位进行控制。
It describes the fuzzy PID-type controller design of the alkali boiler water level, the build of 2-d control table, the realization of the computer design and simulation of the controller.
以碱回收炉的水位控制为例具体论述调整系统控制量的模糊pid控制器的设计、2- D控制表的建立、以及控制器计算机设计与仿真的实现。
The kinematics modeling and parameters adapt fuzzy-PID control system design of the video regulator manipulator on the terminal of the arm is the focus of this text.
本文的主要工作是机械臂终端多自由度视频头调节机械手的运动学建模及其参数自适应模糊PID控制系统的设计。
Using sliding mode variable-structure control method to design controller, carry on stimulating and make contrast with the traditional PID in order to justify its superiority in stabilized effects.
利用滑模变结构控制方法设计控制器、进行仿真，并与传统的PID控制进行仿真对比，以验证其在减摇效果上的优越性。
According to the non-linear mapping relations between PID controller each control variable and error, design non-linear PID controller.
根据PID控制器各控制参数与偏差之间的非线性映射关系，设计非线性PID控制器。
The design principle and realization method of the digital PID control system are discussed according to the characteristic of DC brushless motor.
根据无刷直流电动机的特性，讨论了数字pid控制系统的设计原理和实现方法。
According to actual conditions, design a fuzzy adaptive PID controller to control the openings of the electro-hydraulic proportional valve port, implementing a safe and smooth braking.
依据实际工况，设计了一种模糊自适应PID控制器来控制电液比例调速阀阀口的开口量，实现系统的安全、平稳制动。
Then it discusses the design of Fuzzy control in details, and it also shows the respective curves of the dynamic response during adjusting the torque under the PID and Fuzzy control.
详细论述了系统模糊控制器设计的方法和思路，并给出了转矩调节在PID控制和模糊控制下的动态响应曲线。
The design and application of FUZZY PID in level control of continuous casting crystallizer are introduced.
介绍了连铸结晶器液位控制系统中FUZZYPID的设计和应用。
The method combines fuzzy control technology with PID algorithm and applies the multi mode control to design a control system of temperature and humidity.
该方法把模糊控制技术和PID算法结合起来，采用多模态分段控制设计出温湿度控制系统。
Immune PID control is an intelligent PID control based on the immune principle of Biology. Selection of parameters is the core task for the design of this controller.
免疫PID控制是一种基于生物学中免疫原理的智能PID控制方法，参数设定是该控制器设计的重要环节。
A hardware design project concerning fuzzy in temperature control system based on DSP was introduced, emphasizing the importance of the software method applied to the fuzzy-PID controller.
介绍了基于DSP的恒温模糊控制系统的硬件设计方案，着重介绍模糊pid控制器的软件实现方法。
The thesis adapts traditional PID control and intelligent PID control theories to study the design of UAV's fight control law.
本文主要利用常规PID控制和智能PID控制的理论来研究无人机飞行控制律的设计。
The author analyses dynamic characteristic of cylinder piston-rod displacement track, and presents design principle of the sticking machine with PLC by PID control.
简叙了一种基于PL C的PID控制粘贴机的设计原理，着重分析气缸位移的动态特性，给出于在细分驱动下步进电机跟踪系统的硬件框图。
The ant colony algorithm was used to design PID controller of traction control system, whose parameters could be adjusted automatically.
将蚁群算法应用于汽车牵引力pid控制参数整定控制器设计。
Based on the principle of measurement of the controller, this article optimizes the design of weighting module and speeding module, and puts forward a new PID control algorithm.
在阐述动态配料控制器计量原理的基础上，优化了该控制器的称重模块、测速模块，并提出了一种新的PID控制算法。
In order to improve the precision of the control modules, use 16 fixed-point of computing the PID controller of the design, and optimize the design.
为了提高整个设计模块的控制精度，采用16位定点运算的方法进行PID控制器的设计。
This study provides a reference for analyzing performance of control load system and applying PID control project to design control system.
该项研究对操纵负荷系统的性能分析及利用PID控制方案设计控制系统具有一定的参考价值。
In this paper, the design of a self-tuning PID regulator for pulp consistency control system is introduced.
介绍了应用自整定PID控制的纸浆浓度控制系统的设计。
On this basis, put forward the theory of fuzzy-PID to the realization of drum water level control of the program, and the system software and hardware design.
在此基础上，提出了用模糊-PID理论实现对汽包水位进行控制的方案，并进行了系统软、硬件的设计。
Then, the paper analyzes a kind of intelligence PID control method and design the intelligence PID controller for the servo system.
为了实现高速度、高加速度和高精度伺服系统的设计，系统的位置环采用智能PID控制。
This paper presents a nonlinear PID control system with the characteristics of simple configuration, easy design and high robustness on the base of analysing the features of the glass furnance.
本文在认真分析玻璃液位对象特点的基础上，提出了一种结构简单、设计方便和鲁棒性强的非线性PID控制算法。
This thesis discusses winding tension control based on Fuzzy Adjusting theory, gives the design of Fuzzy PID controller and the experimental results.
本文研究模糊自整定pid的交流驱动收卷张力控制，给出控制器的设计及实验结果。
The software design includes the program design of the total control module, hydraulic module, servo module and the PID programming.
软件设计包括总控制模块、液压、伺服模块的程序设计以及PID程序设计。
At present, PID control strategy is mostly used in Hydro-turbine regulating system. Its control parameters are gained through design and experiments according to the certain operating condition.
当前我国在水电站的水轮机调节系统控制上采用的控制策略主要是PID控制，其控制参数都是基于一定的工况设计、试验得到的。
In this paper, a new design method of nonlinear PID controller with optimal correction function is presented. It can solve the control problem of a complicated nonlinear plant simply and effectively.
该文提出了一种带优化修正函数的非线性PID控制器设计方法，用它设计的控制器能对复杂非线性对象进行简单而有效的控制。
The system uses intelligent PID controller to design automatic control loops, including pressure of incinerator, percentrage of oxygen in gas.
处理后的数据参与控制运算，实现流化床床层温度、炉膛负压、烟气含氧量等控制回路的自动调节功能。
The system uses intelligent PID controller to design automatic control loops, including pressure of incinerator, percentrage of oxygen in gas.
处理后的数据参与控制运算，实现流化床床层温度、炉膛负压、烟气含氧量等控制回路的自动调节功能。
应用推荐