Using multi loop analysis method, the dynamic characteristics of ac excited generator are analyzed based on phase coordinate.
采用多回路的分析方法，对建立在相坐标下的交流励磁发电机的动态性能进行了分析。
Compared with the nonlinear excess fraction method based on phase coordinate relations, this algorithm is clearer mathematically and more convenient for applications.
与基于相位-坐标关系的非线性小数重合法相比，该算法的数学表述更加明晰，应用也更加方便。
A new subdivision method based on adaptive detecting of fringe phase is presented also.
并提出了一种基于对条纹相位进行自适应检测的细分新方法。
At the license plate location phase, we propose a new rough localization method which based on connected area horizontal clustering.
在车牌定位阶段，本文提出了基于连通区域水平聚类的车牌粗定位方法。
The method will provide a technical foundation for developing a safe and stable monitoring and control system based on the whole net phase angle measurement.
该方法将为建设基于全网相角测量的安全稳定监测与控制系统提供一项技术基础。
This paper has discussed the way of probing Doppler shift signal based on crossed phase detecting method in detail and introduced each function circuits briefly.
本文详细的论述了依据正交相位检测法提取多普勒频移信号的方法，并对各部分实现电路作一简要的介绍。
This paper presents four-phase transmission harmonic current detecting method based on instantaneous reactive power theory.
该文提出了基于瞬时无功功率理论的四相输电谐波电流检测方法。
Based on the cable-stayed bridge using method of cantilever, the paper establishes the optimization model of construction phase with multi-objective and multi-constraint and gives the example.
采用多目标、多约束的优化方法，以悬臂施工主梁的斜拉桥为例，建立了施工阶段的优化模型，并给出算例。
A method of sliding mode control based on fuzzy logic, for a class of linear uncertain system shown in phase coordinate, is presented It if derived from the principle of sliding mode control.
本文针对一类相坐标表示的线性不确定系统，根据滑模控制原理，提出一种基于模糊逻辑的滑模控制方法。
A novel discrete cosine transform (DCT) based automated phase measurement method is proposed and verified by a simulation and experiments.
本文提出一种以离散余弦变换(DCT)为基础的自动相位测量方法并以实验和模拟运算进行验证。
Based on the coupled-mode theory, the transfer-matrix method is used to calculate the transmission spectra of phase-shifted long-period fiber gratings (LPFG).
应用耦合模理论和传输矩阵法计算模拟了长周期光纤光栅的透射谱，并对其进行了切趾优化。
The effect of amplitude and phase error on the performance of receiver is discussed in this paper, and a method of digital correction based on FIR filter is proposed.
本文仔细分析了幅相误差对接收机性能的影响，提出了基于FIR滤波的一种数字域校正的方法。
Based on relative phase IP method, the relative phase spectrum IP method is developed. The formula of relative phase spectrum is defined.
本文在激电相对相位法的基础上提出了激电相对相位谱观测法，并定义了相对相位谱公式。
This paper puts forward a voltage and current double closed-loop controlling method based on three-phase voltage source PWM inverter.
提出了一种基于三相电压型PWM逆变器的电压电流双闭环控制方法。
On the research of traditional phase noise measurement methods, a new phase processing and phase noise measurement method based on Equivalent phase Comparison Frequency is proposed in this paper.
本论文在对传统相位噪声测量方法研究的基础上，提出了基于等效鉴相频率的相位处理和相位噪声的测量。
Parameters estimation method of controller based on the gain and phase margin is proposed.
给出了在希望的幅值和相角裕量下控制器参数的计算方法。
A new encrypted in-line holographic watermarking technique is proposed based on double-random phase encoding method, holography and digital watermarking.
在研究数字全息技术的基础上，提出了一种新的加密的同轴全息数字水印方法。
A novel fundamental frequency and initial phase detection method based on DSP is proposed, which can be used to get synchronous fundamental frequency voltage or current signals of power system.
提出了一种基于数字信号处理器的基波相位和频率校正检测方法，可用于电力系统中电压或电流基波分量同步信号的获取。
An information encryption method is proposed based on digital holographic technique and phase retrieve algorithm.
提出了一种基于数字全息技术和相位恢复算法的信息加密方法。
We presented a novel method for forecasting landslide displacement based on phase space reconstruction and support vector machine.
提出了一种基于相空间重构与支持向量机预测滑坡位移的新方法。
A parallel operation control method based on a modulated phase tracking method was designed for high reliability requirement of uninterrupted power supply used in gun command system.
针对火炮指挥系统供电电源高可靠性要求，设计了一种采用相位调制跟踪法的全数字式电源并联系统。
A high performance measurement of initial phase via a Dual Interpolated DFT method based on error information is presented.
提出了一种基于误差知识的二重插值DFT方法用于高精度时钟初相测量。
Numerical simulation based on phase field method is developed to describe polycrystalline solidification for pure material.
基于相场方法对包含多晶粒的纯物质凝固过程进行了数值模拟。
A noise reduction method in nonlinear time series based on phase reconstruction and manifold learning was proposed.
提出了一种基于相重构和主流形识别的非线性时间序列降噪方法。
A simulated temperature field experiment proved that the projection data extraction method based on the phase unwrapping succeeded in facilitating computation of tomography.
模拟温度场实验证明基于相位展开的投影数据提取方法能够更好地完成层析计算。
A novel method of instantaneous phase analysis based on empirical mode decomposition is presented.
提出了基于经验模态分解的瞬时相位分析的新方法。
The detection and location method of single-phase grounding fault based on fault indicator technology was introduced.
重点介绍了基于故障指示器技术的单相接地故障的检测和定位方法。
The paper presents an signal demodulation method used in EMT based on phase feedback search.
提出适用于EMT的基于相位反馈搜索的信号解调方法。
The paper presents an signal demodulation method used in EMT based on phase feedback search.
提出适用于EMT的基于相位反馈搜索的信号解调方法。
应用推荐