Based on analysis on purpose, content and method of middle school physical education and health curricular evaluation standard system, this paper reconstructed new performance evaluation system.
在对中学体育与健康课程标准成绩评价体系的目标、内容和方法分析研究的基础上，重新构建了新的成绩评价体系。
Based on the analysis of the causes for Doppler mismatch of binary phase-coded waveforms, a component code and its processing method is proposed and its performance is analyzed.
本文在分析二相码信号产生多普勒失配原因的基础上，提出了一种最优码的构造码及处理方法，并分析了其性能。
And based on this, a simple method for performance prediction by using linear regression analysis is put forward.
在此基础上提出了应用线性回归分析进行动态预测的简便方法。
On the basis of these analysis, theory and method of direct damage performance-based capacity design is presented in this paper.
在此基础上，本文采用直接基于损伤性能的能力设计方法来实现基于性能的设计。
For the recent decades, the pseudo static method, the response-spectrum analysis, time-history analysis, performance-based design method, spring out early or later.
几十年来，先后诞生了拟静力方法、反应谱方法、时程分析方法、基于性能的设计方法等抗震设计方法。
A new spectral analysis method based on random decrement signature was presented for ship seakeeping performance analysis.
提出了一种新的基于随机衰减信号的谱分析方法以用于船模耐波性能分析。
The test results show that the object segmentation method based on recursive threshold analysis is effective. Its segmentation performance is better than the traditional methods.
试验结果证明，基于递归门限分析的方法是一种行之有效的目标分割方法，分割性能优于传统方法。
At the same time, precise structure elastic-plastic analysis method created advantage for the performance-based design method, an advanced aseismatic design method.
同时，精确的结陶弹塑性分析方法也为先进的抗震设计方法——性能抗震设计法创造了有利条件。
This paper also discusses a circuit parameter estimate method based on mixed-signal circuit performance analysis.
本文给出了一种基于混合电路性能分析的电路参数估计的方法。
This paper describes the composition, the principle, the design method and the performance analysis of a single chip microcomputer-based system for automatic vertical guidance of ranging drum shearer.
本文阐述利用单片微型机控制的采煤机滚筒自动垂直导向系统的组成、工作原理、设计方法和性能分析。
Based on exhaustive algorithm, a new algorithm is presented as detectors generating method in the negative selection model, including its design, performance analysis and experiment.
研究的重点是负选择模型中初始检测器集的生成算法，在穷举法的基础上提出了一个新的检测器生成算法，包括算法的设计、性能分析和试验。
Based on the stability analysis of construction vehicle, it puts forwards a new method to increase the stability performance. The experimental results show the method is effective.
通过分析工程车辆稳定性能，确定其典型失稳工况，提出了工程车辆设计和使用中提高稳定性的思路，试验结果剖析了附着失稳及刚性失稳的现象。
Considering the multiple loads and material performance parameters, the analysis method has been put forward based on it model and the practice.
针对含缺陷压力管系断裂失效分析模式，结合实际操作工况，考虑多种载荷因素及材料性能参数，提出了管系断裂失效风险分析方法。
Suitable seismic performance target was set, calculation analysis was done with seismic performance design method, and strengthening measures were applied based on analysis results.
通过设定适用于本工程的性能目标，采用基于性能的设计方法对结构进行了计算分析，采取了有针对性的抗震加强措施。
A new method of blind estimation for short-code chaotic spread spectrum sequence is proposed, which is based on principal component analysis (PCA) and has good performance at low SNR condition.
针对短码实值混沌直扩系统，提出了一种基于主元分析的算法，实现了在低信噪比下对直扩序列的盲估计。
A new method of the performance measurement definition is presented based on unified telecommunication management network (TMN) requirements, analysis and design (UTRAD) methodology.
提出了一种基于统一的电信管理网需求、分析、设计(utrad)方法学的性能测量项定义方法。
Based on the analysis method of the simple intrinsically safe inductive circuit and its discharge current waveform, studied on the intrinsically safe performance of communication and signal cable.
基于简单电感性本质安全电路的分析方法及其放电电流波形，对通信与信号电缆的本质安全性能进行了研究。
The experiment proves the correctness and performance of vulnerability relation model, and the threat analysis method based on the model is more reasonable and effective.
实验证明了脆弱性关联模型的正确性及其优越的描述性能，基于该模型的威胁分析方法也更为合理、有效。
With analysis of a typical structure, it is shown that the method suggested by the authors may be used in performance-based design as...
通过一典型结构的分析实例，初步证明了文章建议的方法简便有效，在基于结构性能的抗震设计中具有潜在的实用价值。
The sound source localization method based on four-element planar crisscross array was investigated and the localization equations are derived followed by the performance analysis.
在阵列布设方面，本文重点研究了平面四元阵和平面五元阵的定位原理和算法，并进行误差分析和仿真比较。
The sound source localization method based on four-element planar crisscross array is investigated and the localization equations are derived, followed by the performance analysis.
本文研究了平面四元十字阵的定位原理和算法，并对其定向精度以及远场假设误差进行了仿真分析。
The sound source localization method based on four-element planar crisscross array is investigated and the localization equations are derived, followed by the performance analysis.
本文研究了平面四元十字阵的定位原理和算法，并对其定向精度以及远场假设误差进行了仿真分析。
应用推荐