On this basis, the paper discusses the CNC system based on PCI bus interface.
并在此基础上进一步研究了基于PCI接口的数控系统。
Studies issues in the finite state machine (FSM) design in PCI bus interface controllers.
研究有限状态机与PCI总线接口控制器的设计问题。
The FSM model of target PCI bus interface controller is then provided based on PCI bus operation timing.
根据PCI总线操作时序，提出了从设备接口控制器的有限状态机模型。
The paper presents a two-channel high speed data acquisition system based on TS101 with PCI bus interface.
给出了基于TS101和PCI的双通道数据采集处理系统的设计方案。
This scheme includes three parts: PCI Bus interface board, experiment flat board and device driver high-level software.
该设计方案由PCI总线接口板、实验平台板、设备驱动程序及上层软件三个部分组成。
This scheme includes three parts: PCI Bus interface board, experimental platform device driver and high-level software.
该设计方案由PCI总线接口板、实验平台板、设备驱动程序及上层应用软件三个部分组成。
Introduces how to connect the DSP to PCI Bus in brief and choose the means of using special PCI Bus interface chip to achieve it.
介绍DSP芯片如何桥接到PCI总线，并选择利用专用接口芯片的方法来实现。
The other module is PCI bus interface circuit. PI7C8150B chip of PERICOM Corporation is used to finish transmission of the image data.
另一个是PCI总线接口电路，本设计中采用PERICOM公司的PCI桥接芯片PI7C8150B实现图像数据的传输。
The method which integrates PCI bus interface and control logic into a FPGA chip improves the integration density and transplantation of system.
该方法将PCI总线接口和控制逻辑集成于一片FPGA中，提高了系统的集成度和可移植性。
CPCI bus Interface Standard: CPCI bus is a high performance industrial bus acceptable for 3u and 6u board design based on the PCI bus specification.
CPCI总线接口标准的研究：CPCI总线是以pci总线规范为基础的高性能工业总线，适用于3u和6u插板的设计。
This paper provides the framework of hardware coding link; the scheme of the realization of PCI bus interface and the general architecture of hardware and software.
给出了其硬件编码环路框图、具体的PCI接口实现方案及软硬件总体实现方案。
PCI9054 was selected as PCI bus interface, the speed matching issue between local bus and PCI bus was resolved in course of data transmission, and the gusty transmission of mass data was realized.
选择pci9054为PCI总线接口，解决了数据传输过程中本地总线速率与PCI总线速率相互匹配的问题，并实现了数据的大量突发传输。
By designing and compiling interface application driving program, the interrupt and query schemes of data transmission based on PCI bus are realized.
并通过设计和编写接口应用驱动程序，实现了基于PCI总线方式下数据传输的中断和查询两种方案。
The paper proposes a password circuit that by using computer ISA and PCI bus and printer interface.
本文介绍了利用计算机ISA、PCI总线和打印机接口设计密码电路。
Introduce the PCI-AHB interface and PCI local bus operation, especially analyse the architecture of PCI-AHB bridge module.
对PCI -AHB接口和PCI总线操作进行了介绍，详细分析了PCI—AHB桥接模块的结构设计。
This paper also analyzes the internal structure of the interface, and gives the design of PCI bus configuration and the realization of target state machine in the interface of PCI.
本文还分析了接口内部实现结构，给出了PCI总线配置空间的设计以及目标状态机的实现。
The design of the PCI bus in the interspaced ordonnance, and the realization of the sequence state machine in the PCI interface controller is given.
给出了PCI总线配置空间的设计以及PCI接口控制器中时序状态机的实现。
Many specifications are involved with PCI bus and interface explanation is complicated, so its difficult to develop the stable PCI bus equipment of high performance.
PCI总线涉及的规范比较多，接口说明复杂，开发出高效、稳定的PCI总线设备具有一定难度。
In this article, to carry the 6-axis motion controller out, a method of using PCI special interface chip PCI9052 to be a interface bridge of PCI bus and DSP (TMS320LF2407), was introduced.
文章介绍了一种采用PCI专用接口芯片pci9052作为PCI总线与DSP (TMS320 LF 2407)的接口桥接器，实现6轴运动控制卡的硬件设计方法。
To process datum real time, the interface between computer and high-speed data acquisition system is a challenge. The PCI local Bus is superior in fast transmission and better compatibility.
为了将数据实时的读进计算机做处理，高速数据采集系统也对采集板和计算机之间的接口提出了新的要求。
Difficulty of system Extending and transplant are found by means of PCI (Peripheral Component Interface) bus motion controller or PC (Programmable controller).
系统的扩展和移植难度发现的PCI(外设组件接口)总线运动控制器或PC(可编程控制器)的手段。
This high-speed data acquisition card designed is based on PCI bus and have high capacity memory interface. It combines high-speed date acquisition and high capacity real-time memory.
为此，本文设计了一款基于PCI总线且具备可扩展大容量存储设备接口的高速模拟信号采集卡，将高速数据采集和大容量实时存储结合在一起。
Realize the interface between PCI9054 and the PCI bus, including the bus arbitration, read and write of the registers, the configuration of the EEPROM, the DMA transfer, interrupt response and so on.
实现PCI9054与计算机PCI总线的接口，包括总线仲裁，寄存器读写操作，EEPROM的配置和下载，DMA传输，中断响应等功能。
In this paper, an optical network interface card with PCI bus peak bandwidth transmission rate has been designed and implemented.
本文设计和实现了具有PCI总线峰值带宽传输能力的光互连网络接口卡。
After the PCI bus features, control mechanism, interface specification and interface design pattern is studied, we expatiate the driver specialty in Linux.
以数据库加密装置的PCI接口驱动开发为背景，研究了PCI的总线特点、控制机制、接口规范及接口设计方式。
This invention provides a method for multiplexing pins based on PCI bus which can reduce port numbers of PCI interface equipments but does not increase complexity of adding circuits.
本发明提供了一种基于PCI总线的管脚复用的方法。该方法可以明显的减少PCI接口设备的端口数量，而且不需要大幅度增加电路的复杂度。
Here a design method for high accuracy data acquisition based on PCI bus is presented, including the data acquisition and the design of the interface for PCI bus.
作者介绍了一种基于PCI总线的高精度数据采集系统的设计方法，包括数据采集和PCI总线接口两部分的设计。
The grating sensor interface which is based on PCI bus of this paper has a lot of merits, such as miniaturized, portable and intelligent and so on.
本文设计的基于PCI总线的光栅传感器接口卡具有小型化、便携式智能化等优点。
The basic configuration of PCI bus is introduced, as well as PCI9052, the core component in the card, which performs the control of PCI interface.
论文中讨论了PCI总线的基本结构，详细介绍了基于PCI总线控制卡的核心器件—PCI接口控制芯片pci9052。
We study and analyze PCI bus protocol and apply PCI9050's interface chip to design the interface card of PCI bus and compile drive software of its interface card.
对PCI总线协议进行了分析和研究，采用PCI9050接口芯片设计了PCI总线接口卡，编写了接口卡的驱动程序。
应用推荐