One-way path analysis method, with a certain degree of rationality and innovation in theory, was feasible in practice and worthy of research and popularization.
单向通径分析法在理论上有一定的合理性和创新性，在实际上是可行的，值得研究和推广。
An infiltration model-based attack path analysis method was proposed which can simulate network security state changes and give out attack paths that may lead to certain attack goals.
基于渗透模型的网络攻击路径挖掘方法，通过匹配知识库定义的基本渗透过程，模拟攻击过程中网络安全状态变迁，挖掘可能达到特定攻击目标的攻击路径。
Tools used in this process include critical path method, schedule compression, what-if scenario analysis, resource leveling, and critical chain methods.
在这一步中所用到的工具包括：关键路经法，计划压缩，what-if脚本分析，资源水平，关键链。
In this paper, the method of signal flow graphs is applied to path enumeration and deflection routing performance analysis in multihop networks.
本文将信号流图的方法应用于多级跳跃网中的路径枚举和折射路由性能分析。
According to the characteristics of networking toll expressways, a path identification method based on probability analysis was proposed.
根据高速公路联网收费的特点，提出了一种基于概率分析的路径识别方法。
The method is based on some static analysis techniques, including loop unwinding and path feasibility checking.
该方法基于程序分析技术，包括循环展开和路径可行性分析技术。
A solving method based on game theory was proposed, and the technical path and calculation steps for game analysis were established.
提出一种基于博弈分析思想的求解方法，建立多目标问题博弈分析的技术路线和计算步骤。
The monitoring methods of detecting waste gas pollution are introduced. The accurate analysis path of detecting dust by isokinetic sampling method is concluded based on the practical experiments.
介绍了废气污染物监测方法，根据实践经验总结了等速采样法在烟尘测试过程中的准确分析路径。
However, in this article the author uses the method of economic analysis of law and then demonstrates its theoretical base, category of exertion and material path.
以四个发生在公共场所的侵权纠纷为例，提出运用法律经济分析方法的判断思路，并论证该方法的理论基础、适用原则及具体思路。
Using differential geometry and vector analysis, a new tool-path generation method for freeform surface machining is presented.
以微分几何学和矢量分析为工具，提出了复杂曲面加工路径规划的新方法。
Method Study the feasibility and design patterns of psychosis clinical path. by using literature retrieval, analysis and comparison method and systems theory.
方法运用文献检索法、分析比较法、系统论方法，针对精神疾病临床路径的可行性、设计模式进行研究。
The total correlations between independent variable (X) and dependent variable (y) were divided into their component parts with the method of path analysis.
还利用了通径分析方法将自变量(X)与依变量(Y)问的总相关分剖为其组成部分。
This paper provides the structural stability analysis considering geometric nonlinearity on the prebuckling path by the finite element method.
本文采用有限元法分析考虑前屈曲几何非线性影响的结构稳定性。
Based on the analysis of current NC automatic programming systems, a new method for the path control of five-axis linkage machine tools was proposed by means of simulation.
在分析了目前的数控加工自动编程系统后，提出了一种以仿真实现五轴联动机床轨迹控制的新方法。
A new method not requiring ring system information for finding SSSR based on generating tree, chord and path analysis is set up.
本文提出一种基于生成树、弦和路径长度的环系最小环最小集识别方法，不需事先进行环系识别。
In this paper, on the basis of Gradient Vector flow (GVF) snakes, a fully automatic image segmentation algorithm based on the analysis of flow field and the minimal path method is proposed.
人工干预使蛇模型只能用于半自动的图像分割，该文在梯度向量流(GVF)蛇模型的基础上提出一种基于流场节点与最小路径方法的全自动图像分割算法。
In this paper, on the basis of static timing analysis, a new method is employed to enhance the efficiency of FPGA partition by extracting the information of critical path-delay.
文章在静态时序分析的基础上，提出了一种利用关键路径时延信息提高FPGA分割效率的方法。
A novel method of asynchronous data-path performance analysis is described.
介绍了一种新型的异步数据通路性能分析方法。
Using the method of the path—coefficient analysis Studied the grain yield and stability of different maize varieties under the condition of poly-environment.
通过对不同品种在多环境条件下的子实产量及稳定性的通径分析，认为倒伏对玉米的产量及其稳定性的影响最大。
Analysis indicated that it is an effective method to combine path-analysis with principal component analysis for integrated indirect selection of photosynthetic rate.
分析表明：通径分析与主成份分析相结合的方法是进行光合速率综合的间接选择的有效方法。
Abstract: a tool path generation method is presented for NC machining based on vector analysis and NURBS.
摘要：描述了基于矢量分析和NURBS的数控加工轨迹设计方法。
Direct and indirect effects of different protein groups upon bread-processing quality characters were determined by using method of path analysis.
利用通径分析明确了不同蛋白组分对面包加工品质的直接作用和间接作用。
This method is based on multi-delay modeling, SPICE and logic simulation. It provides an effective tool to design and analysis asynchronous data-path.
这种方法在进行性能分析时基于多延迟模型、SPICE和逻辑仿真，可以作为异步数据通路设计和分析的一种有效工具。
Magnetic suspension technology was explored for the cable-creating machine. Theoretical analysis and designing method with consideration of magnetic path, temperature were presented.
针对电缆管绞机中的实际要求，在对其磁力悬浮系统的磁路、磁力以及电阻和温度等各方面进行理论分析的基础上，提出了设计方法。
It propose nonlinear dynamic analyzing model calculation method of the motor in the use of nonlinear magnetic path analysis and finite element calculation.
采用非线性磁路分析和有限元计算结合的方法给出了该电机的非线性动态分析模型计算的一种思路和方法，有助于电机设计分析。
From the analysis of the test results, the method of determining temperature increment path, shining temperature flowing path, is presented and relative formulas are given.
本文在分析试验获得的不同恒定温度下砼应力—应变曲线的基础上，通过假定，提出了映射温度流动路径，给出了具体的计算公式，并进行了试验验证。
Double nonlinear factor was considered in the structure analysis. To calculate the ultimate bearing capacity, the equilibrium path of the load and displacement using arc-length method was traced.
结构分析考虑双重非线性情况，采用弧长法跟踪整个荷载—位移全过程的平衡路径，确定极限承载力。
Using the numerical method, the reinforcement mechanism of soil-nailing based on stress path analysis was studied.
采用数值方法，从土体应力路径的角度研究了土钉支护的工作性能和加固机理。
Using the numerical method, the reinforcement mechanism of soil-nailing based on stress path analysis was studied.
采用数值方法，从土体应力路径的角度研究了土钉支护的工作性能和加固机理。
应用推荐