Study on the process of molded particleboard products.
刨花模压制品生产工艺的研究。
The proper-ties of particleboard depend on a variety of influencing factors.
刨花板的性能与许多工艺因素有关。
This paper analyses the difficulty in using corn stalk alone to make particleboard.
本文分析了以单一玉米秆为原料制造符合标准的刨花板的困难所在。
Main factors affecting setting and hardening of cement particleboard are expounded.
阐述阻碍水泥刨花板凝结与硬化的主要因素。
Some Suggestions are made about how to select equipment for new particleboard projects.
为新建刨花板项目及设备选型提出了一些建议。
Residual cane fibre (Bagasse) is Burned as fuel or used as filler for paper and particleboard.
榨取糖液后所余的蔗渣可用作燃料或用来造纸和压制碎料板。
Main technology parameters for manufacturing homogeneous particleboard are confirmed through test.
通过试验确定了麦秸均质刨花板的主要工艺参数。
In the production process of particleboard, dosing and applying glue system played important roles.
在整个刨花板生产过程中，调施胶系统所起到的作用是至关重要的。
It is thought that particle modification is one of effective resolutions to improve particleboard properties.
认为通过刨花改性提高刨花板的性能是一种有效的途径。
The purpose of this paper is to study the technology for manufacturing wood-cement particleboard by hot-pressing.
本文主要论述了热压法制造水泥刨花板的工艺。
Particleboard gives rise to wet stress in the course of manufacture and use owing to the change of moisture content.
刨花板在制造和使用过程，由于水分的变化而产生湿应力。
Its main products include: particleboard, MDF, Blockboard, multilayer, such as furniture, building decoration materials.
其主要产品包括：刨花板、密度板、细木工板、多层板、贴面板等建筑装饰家具材料。
A higher pressing pressure can improve electromagnetic shielding effectiveness of conductive particleboard to some extent.
运用较大热压压力的制板工艺，可以在一定程度上提高导电功能刨花板的电磁屏蔽效能。
But veneer particleboard furniture to a part of the edge must, because no edge board will absorb moisture, swell and damage.
而且刨花板贴面家具着地部分必须封边，因为不封边板就会吸潮、发胀而损坏。
This thesis studied the technology of horizontal tubular particleboard extrusion method, including the following two aspects.
本文研究了利用卧式挤压方法压制中空刨花板的技术。
In this paper, some factors affecting the strength of corner joint structure in particleboard furniture have been investigated.
本文针对影响刨花板家具角结构强度的几个因素进行了探讨。
The results indicated that the accuracy of panel furniture was influnced by the thickness variation of particleboard obviously.
因此控制板材厚度偏差是目前刨花板生产中亟待解决的一个重要问题。
Experiment results show that AE technique can be used as a supplemental method to detect mechanic performance of particleboard.
结果表明，AE技术可作为检测刨花板力学性能的补充手段。
The objective of this study was to optimize the manufacturing process for producing tubular particleboard with E1 grade performance.
选用施胶量、甲醛捕捉添加剂、挤压温度、挤出速度为试验因子，探讨E1级空心刨花板的生产工艺。
The better property of wheat straw particleboard bonded UF can be produced with the raw material of wheat straw disposed by enzymes.
用经酶处理后的麦秸作原料，可以压制出性能较好的脲醛树脂胶合的麦秸刨花板。
There is plenty of edge waste in manufacturing of cement particleboard, if we do not take the recycle measure, it needs large space to pile up.
水泥刨花板生产中齐边废料的量较大，如果不采取措施回收再利用将占用很大的堆放空间。
The dynamic deflection moduli of particleboard were measured by flexural vibration. longitudinal transmission and longitudinal resonant vibration.
利用弯曲振动试验、纵波传播试验、纵波共振试验测定刨花板的动态抗弯弹性模量。
Indeed, many hospitals are built with materials, like particleboard, PVC flooring and even conventional paint, that can leach poisonous substances.
的确，许多医院建筑所使用的材料可能过滤出有毒物质，像塑合板，聚氯乙烯地板，甚至是常用的涂料等。
A brief description is given for various newly developed technology in the production of particleboard and medium density fiberboard in the last 10 years.
简要叙述近10年来刨花板、中密度纤维板生产中涌现出来的各种新技术。
The flyash particleboard was a kind of composite material with the flyash as the main material and the wood flake as the reinforcement through hot pressing.
粉煤灰刨花板是以粉煤灰为主要原料，木刨花为增强材料，经热压而成的一种复合板材。
Three group of particleboard were tested that showed the torsional forces in the member related to the internal strength, the size and the joint constructions.
通过对三组刨花板进行实验结果可以看出，刨花板构件扭转力矩与刨花板内部强度、尺寸规格和节点结构有关。
The characteristics of three types of hot press used in particleboard production are introduced, and the distribution of these presses in the world is analysed.
介绍了刨花板生产中常用的三种类型压机的特点和国内外应用情况。
Distribution of formaldehyde emission on the side and surface from particleboard is analyzed through experiments in this paper. Some mathematics models were given.
通过实验分析了刨花板端面和平面甲醛散发的分布特征，给出了数学模型。
Distribution of formaldehyde emission on the side and surface from particleboard is analyzed through experiments in this paper. Some mathematics models were given.
通过实验分析了刨花板端面和平面甲醛散发的分布特征，给出了数学模型。
应用推荐