The effect of particle morphology, size and grading on the mortar's properties was investigated.
研究了EPS颗粒形貌、粒径、级配对砂浆性能的影响；
TEM showed uniform structured composite latex particle morphology and obvious core-shell structure.
TEM显示，复合乳胶粒子形态均匀规整，并呈现明显的核壳结构。
The effects of the feeding ways, the initial concentration of the reactants and the drying methods on the particle morphology were studied.
研究了不同的加料方式、反应物初始浓度配比以及干燥方式对合成过程和粒子性能的影响规律。
The effects of reaction temperature and organic additives on the particulate properties such as the particle morphology and size are discussed.
本文对反应温度和有机添加剂对颗粒性能的影响，如颗粒的形貌和大小，进行了讨论。
This allows the particle morphology to be controlled and prevents pronounced interpenetration of the different layers despite their miscibility.
这使得粒子的形态可控，并且避免了本来很容易互溶的层间的互相渗透。
The particle size and distribution of dispersion were measured by dynamic light scattering, The particle morphology of dispersion was observed by TEM.
动态激光光散射测量水分散液粒径及其分布，透射电镜观察粒子形态。
The PVC paste blending resin is a kind of suspension polymerized resin with spheric particle morphology, high apparent density and low oil absorption.
聚氯乙烯糊用掺混树脂是一种颗粒外观球形化、表观密度较高、吸油率低的悬浮聚合树脂。
FT-IR, TEM and other paper testing equipment respectively characterized the structure, the particle morphology of the resultant dispersions and the ph.
用FT - IR、TEM和纸张物理性能检测的手段对聚合物结构、乳胶粒子形态以及应用性能进行了表征。
The thermodynamic approaches to predict particle morphology were summarized and the rule of minimum interfacial free energy change was discussed in detail.
总结了复合微粒形态的热力学预测方法，尤其对界面自由能量的变化最小原则进了评述。
The effects of the reactant mixing patterns on the reaction mechanism, chemical content, particle morphology and aggregate structure were investigated mainly.
着重考察了反应气混合方式对反应机理、化学含量、粒子形态及凝聚结构的影响。
At the same time, the application of crystallization technology in controlling particle morphology, improving compression and delivery properties is introduced also.
同时介绍了结晶技术在药物晶型控制、压缩性能和释放性能改进方面的应用。
FT-IR, TEM and other paper testing equipment respectively characterized the structure, the particle morphology of the resultant dispersions and the physical properties of the sized paper.
用FT - IR、TEM和纸张物理性能检测的手段对聚合物结构、乳胶粒子形态以及应用性能进行了表征。
XRD, TG-DTA, SEM, TEM, and elementary analysis were used to characterize the structure, particle morphology, characteristic, and chemical composition of the synthesized layered compounds.
通过XRD、TG - DTA、SEM、TEM和元素分析研究了合成产物的结构、形貌、性质和化学组成，探讨了合成条件对水热反应产物的影响。
The optimum values of them in the supports are found. It is suggested that the addition of ester during spraying has detrimental effects on the support particle morphology and olefin polymerization.
确定了载体中含水及含醇的较佳范围，并指出二氯化镁醇合过程中加酯进行喷雾成球对载体形态和对催化剂聚合行为均不利。
The results show that materials with a single olivine structure, rules of the sample morphology and particle uniformity.
结果表明，该方法制得的材料具有单一的橄榄石结构，样品形貌规则、颗粒均匀。
The influence of carbonizing temperature and time was investigated by XRD in this study. The morphology and particle distribution of the powder were observed by SEM.
根据X射线衍射图研究了直接还原碳化温度及时间对反应产物的影响，用扫描电镜观察了粉末颗粒形貌和粒度分布。
Particle shape, surface morphology and microstructure of skin layers and adhering satellites were studied by using optical and scanning electron microscopy.
用光学显微镜和扫描电子显微镜研究了粉末形状、表面形态和包复层、粘接处的显微组织。
The effects of crystallization temperatures on structure, morphology and particle size of samples were investigated by using XRD, FT - IR and SEM.
利用XRD、FT-IR及SEM等表征手段研究了不同晶化温度对样品结构、形貌和粒径大小的影响规律。
The results show that the morphology, the state of aggregation and the particle diameters of the resin are Connected closely with the method of polymerization.
结果表明聚合方法对树脂形态、粒径、分散系数和聚集态结构均有一定程度的影响。
The morphology of cement particle was characterized by the microcosmic fractal dimension.
将微观分维作为表征水泥颗粒的形态参数；
The property of fine powder depended on morphology and particle size distribution.
粉末的性能在很大程度上取决于粉末粒子的形貌和粒度等特征。
The absence of force allows both the polymeric material and the filtering compounds to retain their original shape (morphology) and particle size.
缺乏力量允许聚合物材料和过滤的化合物保留他们原始的形状(形态学)和颗粒大小。
The effects of PAM and microwave treatment on the morphology, particle size and crystal structure of the material were characterized by SEM, laser particle size analysis and XRD techniques.
通过SEM、激光粒度分析和XRD等技术，研究了PAM和微波处理对材料的形貌、粒度和晶相结构的影响。
Table 2 and Fig. 3 show the influences of particle size and contents of PEG on morphology of TiO2 film.
表2和图。3显示的影响粒子的大小和内容，便挂形态的二氧化钛薄膜。
The diameter distribution, surface morphology, thermal properties and structure of the microcapsules were investigated by means of laser particle size analyzer, SEM, DSC and FT-IR, respectively.
利用激光粒径分布仪、扫描电镜、差示扫描量热仪（DSC）和傅立叶转换红外光谱仪分别研究了微胶囊的粒径分布、表面形态、热性能和壳结构。
By scanning electron microscopy, the morphology of polystyrene microspheres was characterized, the particle size of polystyrene microspheres was measured by laser particle size analyzer.
通过扫描电镜对聚苯乙烯微球进行了形貌表征，激光粒度分析仪测量聚苯乙烯微球的粒径。
With the expansion of the use of particles with special morphology, higher requirements to the control of particle size and morphology emerged.
随着特殊形态高分子颗粒应用的扩展，对颗粒的粒径及形态的控制都出现了越来越高的要求。
The toughening efficiency was related to morphology, interfacial bonding, thermoplastic particle deformation and matrix deformation of the system.
体系增韧效果与相态结构、界面粘合、热塑性粒子的延展性和双马基体的延展性有关。
The toughening efficiency was related to morphology, interfacial bonding, thermoplastic particle deformation and matrix deformation of the system.
体系增韧效果与相态结构、界面粘合、热塑性粒子的延展性和双马基体的延展性有关。
应用推荐