The study of wearing rules and mechanical fault diagnoses is based on wear particle analysis.
磨损规律和机械故障诊断等研究都离不开磨粒分析技术。
Transmission fluctuation correlation spectrometry (TFCS) is a new method for particle analysis.
消光起伏相关频谱法(TFCS)是一种新的颗粒测量方法。
WIZARD ZAHORANSKY KG offers offers to Particle analysis, Laboratory equipment and Laboratory equipment for grain size measurement.
WIZARD ZAHORANSKYKG公司为您提供准确的、可靠的实验设备，粒子分析、质点分析，粒子大小测量器。
This paper takes the ferrography technology as a monitoring means, we use wear particle analysis to judge the wear condition of engine.
笔者利用铁谱技术作为一种监测手段，通过磨粒分析来判断发动机的磨损状态。
The test results show that wear particle analysis can be used to compare the effect of the variation of a particular factor on wear processes.
试验结果表明，磨损粒子分析能够用来比较特殊因素的变化对磨损过程发生的影响。
Methods the number of insoluble particles in angiography was detected by the ZWF-J6 particle analysis instruments and the shape was observed by a YSZH microscope.
方法使用ZWF -J 6型微粒分析仪和尼康ysz - H型显微镜，检测和观察血管造影术中造影剂不溶性微粒的数量和形状。
This paper presents the application of wear particle analysis to the study of the effect of a particular factor (e. g. ionitriding temperature) on bearing failure.
本文介绍了磨损粒子分析在研究特殊因素(如离子氮化温度)对轴承失效的影响中的应用。
The major points of the paper are as follows: (1) the concept of particle measuring function is presented, based on which, the general specification of particle analysis is given;
主要内容有：（1）提出粒度测量函数的概念。并在此基础上提出粒度分析的共同指标；
Based on wear parameter and experience data, the imitated wear particle and surface images of components were given. These are very useful for the fault diagnosis and wear particle analysis.
通过给定的磨损参数，并结合经验数据，给出可能产生的磨粒和磨损表面形貌图谱，为后面的故障诊断和磨粒分析奠定了基础。
Particle collisions are messy and it takes a lot of careful analysis to separate anomalies from mundane background events.
粒子碰撞杂乱无章，将正常情况下的活动与异常现象区分开来需要周祥的分析。
Analysis the characteristic and nature of the nano particle, we discussed a scheme of how to coating the nano material to the fabrics.
对纳米粒子进行特性与表征分析，探讨如何将纳米粒子整理到织物及服装产品上的方案。
Nature of normal distribution and error analysis are very useful in high-energy physics and particle physical disposal experimental data.
正态分布的性质及误差分析在高能物理与粒子物理处理实验数据时是非常有用的。
It presents an effective and elegant tool for the analysis and correction of arbitrary order aberrations of charged particle optical systems.
自动微分技术为带电粒子光学中的任意高阶像差分析与校正提供了一个很有效的工具。
Combine the intuition of microscope and fast, accurately, conveniently of laser size instrument, for guaranteeing the reliability of the particle size analysis result is very useful.
将显微镜的直观与激光粒度仪的快速、准确和方便结合起来，对于保证粒度分析结果的可靠性非常有用。
The MSS analysis is expected to offer an effective tool for exploring the particle motion in fluidized bed with coarse granules.
多重分形谱图分析有望为大颗粒流化床中颗粒运动规律的探测提供一种新的手段。
The crosslinking process of the system is studied and molecular ball theory of the crosslinking for polymer is advanced by the particle size analysis.
通过粒度分析，研究了交联体系的交联过程，提出了聚合物交联的分子球理论。
All above results are very important for particle size and distribution analysis. And these results have been successfully applied to measure the droplet field of nozzle atomization.
这些结果，对分析粒子的大小和分布是十分重要的，并在喷嘴雾化场测试中得到了应用。
The relationship between cement strength and volume fraction of different phosphorous slag particle diameter ranges was analyzed by gray relevant analysis method.
采用灰色关联分析方法研究磷渣各粒径范围颗粒含量与水泥强度之间的关系。
A combined specular and diffuse reflection at the wall and at the particle surface is included in the analysis.
分析中气体分子在壁面和颗粒表面处均假定为部分镜反射和部分漫反射。
With analysis of forces on particle and calculation of terminal velocities, terminal velocity models are selected, and then Pulse jamming settlement theory was discussed.
在颗粒受力分析及沉降末速计算基础上，首先选取了沉降速度模型，进而对脉动干扰沉降理论做了初步探讨。
The results show that using suspension grade (SG) model makes the calculation and analysis results of the suspension velocity of particle more accurate.
结果显示，采用悬浮分级模型提高了颗粒悬浮速度的分析和计算精度。
Full wave model phase analysis technique may involve wide subjects, but this paper only deals with the analysis methods of ray, amplitude, wave spectrum and particle vibration pattern.
全波模型震相分析法研究的内容是非常广泛的，本文仅对其中的射线分析、振幅分析、波谱分析、质点振动方式分析等方法进行了探讨。
Detail analysis of technological parameters influencing particle shape and distribution of alloy powder has been made.
对影响合金粉末颗粒形状和粒度分布的工艺参数进行了较为详细的分析。
A plasma kinetic analysis and a nonlinear particle simulation on a hybrid peniotron are made in this paper.
对混合型潘尼管作了等离子体动力学分析和非线性粒子模拟。
Force analysis is a key problem in particle dynamics. In this paper, Sir Examples are discussed and criteria are given for the correctness of force analysis.
物体受力分析是研究质点动力学问题的关键。本文结合剖析六个例题，给出两条检查和判断物体受力分析正确与否的规则。
It is concluded that AD method is a rather effective tool for the aberration analysis of charged particle optical systems.
证明ad方法对带电粒子光学系统的像差分析是极其有效的。
The particle sizes measured by elutriation method and laser particle size analysis are bigger than those by the other two methods due to aggregation.
采用淘析法、激光粒度分析法、渗透过滤法、显微镜法对膨润土及石英的粒度进行测量比较分析。
First, a particle size distribution (PSD) analysis together with a detailed analysis of morphological properties of the excipient particles were performed.
首先，结合辅料颗粒形态特性的细微分析，对颗粒粒径分布(PSD)进行分析。
Analysis of the particle velocity distribution and the gas-solid hydrodynamics indicate that the scale of inner particle circulation is crucial in determining the mixing pattern within the beds.
颗粒速度分布和气固流动特性分析显示，内部颗粒循环尺度是影响床内混合方式的重要因素。
The effects of PAM and microwave treatment on the morphology, particle size and crystal structure of the material were characterized by SEM, laser particle size analysis and XRD techniques.
通过SEM、激光粒度分析和XRD等技术，研究了PAM和微波处理对材料的形貌、粒度和晶相结构的影响。
应用推荐