What a pebble bed reactor is, is in fact the same coated particle with the uranium kernel and there are about ten thousand of these particles that are put into a graphite pebble.
什么是卵石层反应堆，事实上就是同样的,铀核包装的微粒,有大约1万的微粒,被放入了一个石墨卵石里。
The effects of fluidization number, injection velocity, particle mean diameter and static bed height on jet fluctuation are discussed.
研究了流化数、射流初始速度、颗粒平均粒径及静态床层高度对射流脉动特性的影响。
On the equipment of two dimensional fluidized bed, we were primarily engaged in experimental research on coarse particle dense bubbling fluidized bed.
在二维流化床试验装置上，对由大颗粒物料组成的密相鼓泡流态化床进行了试验研究。
Combining with particle impact heat transfer model, DEM method is also used to systematically simulate the heat transfer process in fluidized bed at the level of particle.
将DEM方法与颗粒碰撞传热模型结合，在颗粒层次上对密相流化床内的传热过程进行了较为系统的数值研究。
Fluctuation Complexity varied with different particle, static bed height diameter particle and axis position of sensor are studied.
同时本文还对不同静床高、轴向位置、平均粒径的体系的涨落复杂性进行了研究。
The structures of the gas solid two phase flow in the suspension bed were measured by a particle dynamic analyzer (PDA) at different apparent velocities for each of the nozzle structures.
用颗粒动态分析仪(PDA)测量了悬浮床内气固两相流动的结构，确定了不同表观气速和不同进气结构条件下的两相流场的特点。
The particle growth mechanism is studied in a batch operational fluidized bed spray granulator of beau powder.
本文在间歇式流化喷雾造粒床内，研究了豆粉流化造粒的颗粒生长机理和规律。
Spouted bed is an efficient reactor for handling the coarse particle materials.
喷动床是处理粗颗粒物料的高效反应器。
In order to achieve the requirement of feeding in sintering process, a reasonable particle segregation in top, middle and foot layers of mixed bed, charging table and roller-conveyor are explored.
为了实现烧结过程对混合料布料的要求，实现在混合料上、中、下层合理的粒度偏析，已开发了反射板式布料器、多辊式布料器等。
A new fuzzy measuring model for the average particle size in fluidized bed is described in this paper.
本文建立了一种对流化床中颗粒尺寸进行测量的模糊模型。
A water treatment system includes a tank that contains a particle bed for removing minerals from water flowing through the tank.
一种水处理系统包括罐，所述罐中包含用于从流动通过所述罐的水中去除矿物质的颗粒床。
The flow property of solid particle in flowing bed is a key factor affecting the efficiency.
固体颗粒在移动床内的流动特性是影响床层使用效率的一个关键性因素。
Particle velocity distribution in the bed was measured to investigate the influence of manufacturing conditions and structure of the bed.
测量了床内颗粒速度分布，考察了操作条件、体系结构等因素对流化床流动特性的影响。
The MSS analysis is expected to offer an effective tool for exploring the particle motion in fluidized bed with coarse granules.
多重分形谱图分析有望为大颗粒流化床中颗粒运动规律的探测提供一种新的手段。
Cyclone separators are the key equipment for warranting that circulating fluidized bed boilers have a certain particle circulation rate, with good combustion and desulfurization efficiency.
旋风分离器是保证循环流化床锅炉具有一定颗粒循环倍率、燃烧效率、脱硫效率的关键设备。
The fluidized bed aerosol generator was used to aerosol the fly ash, and the Electrical Low Pressure was used to measure the particle number concentration before and after particle aggregation.
采用流化床气溶胶发生器对飞灰进行气溶胶化，采用低压电称冲击器在线测量聚并前后飞灰粒子的数目浓度。
The model is used to predict the velocity, particle trajectory and concentration of the particle phase in circulating fluidized bed.
这一模型可用于预测循环床中颗粒相的速度、颗粒轨迹和颗粒相浓度。
Its main work includes the Yellow river sediment cross-section tests, river bed surface quality sampling and particle size distribution analysis and so on.
其主要工作内容包括黄河河道断面淤积测验，河道表层河床质取样及颗粒级配分析等工作。
Structure of a new fixed bed particle layer deduster, working principle of combined fluidized bed dust-removal device and characteristics of dedusters are introduced.
介绍了新型固定床颗粒层除尘器的结构、组合式流化床清灰机构的工作原理以及除尘器的特点。
The grain fracture of energetic particle bed as a result of dynamic impact and dynamic compression at different temperature was measured by using a high-low pressure launch set.
利用高低压发射装置，测定了含能颗粒床在不同环境温度下动态撞击与动态挤压的破碎程度；
Fluidized bed drier enjoys advantages of even solid particle mixing and large heat and mass transfer area of gas and solid phase.
流化床操作具有固体颗粒混合好，气固两相传热传质表面积大等优点。
The experiment shows that the minimum spouting velocity was related to the particle sizes, bed height, and operational temperatures.
实验表明，双喷嘴矩形喷动床的最小喷动速度与颗粒粒径、床层高度及操作温度有关。
Numerical simulations on particle mixing characteristics of spout-fluid bed were carried out in three dimensional based on discrete element method (DEM).
采用离散元方法，对喷动流化床内的颗粒混合特性进行了三维直接数值模拟。
Numerical simulations on particle mixing characteristics of spout-fluid bed were carried out in three dimensional based on discrete element method (DEM).
采用离散元方法，对喷动流化床内的颗粒混合特性进行了三维直接数值模拟。
应用推荐