• Selection of the type and thickness of roadway surfacing to be constructed is an important part of design.

    新建道路路面类型和厚度的选择是设计的一个重要部分。

    youdao

  • In the specific embodiment, the elongated structure has a structural width and a structural length, and the structure length is extended by penetrating through the vertical part of the thickness.

    在一个具体实施例中,所述伸长结构具有结构宽度和结构长度,所述结构长度穿过所述厚度的竖向部分而延伸。

    youdao

  • The thickness of the head part is changing along its warp direction and the winding Angle of any point on it varies.

    纤维缠绕复合材料压力容器封头部分沿其子午线方向其厚度在不断变化,且任意点的缠绕角度也各不相同。

    youdao

  • Te also raises the thickness and hardness of the chilled layer of white cast iron, reduces the area with mottle and lowers mechanical properties of the part of gray cast iron.

    碲增加冷硬铸铁白口层厚度和硬度,缩小麻口区,但降低灰口部分的机械性能。

    youdao

  • The insulating layer is formed so that a portion thereof that faces the heat transmitting part of the heater layer has a thickness larger than that of the rest of the insulating layer.

    形成绝缘层使得其面对加热器层热传输部分的部分具有比绝缘层的其余部分更大的厚度。

    youdao

  • Changing the wall thickness can have a profound effect on the warpage, depending on the part geometry and the material being molded.

    根据零件特征和填充的材料,零件壁厚对翘曲有很重大的影响。

    youdao

  • The height and diameter of each part in laryngeal cavity, the length, breadth and thickness of vestibular folds and vocal folds were measured, analysed and compared.

    且对喉腔各部的高度及有关径线,前庭襞、声襞的长度、宽度、厚度,声门裂宽进行了测量、分析和对比。

    youdao

  • The Lithofacies paleogeography and the thickness variation of Maokouan Subseries and Wuchiapingian Stage in east part of South China are analyzed and some questions in dispute are discussed.

    分析了华南东部茅口亚统和吴家坪阶的岩相古地理分区及厚度变化,在此基础上对几个有争论的问题进行了讨论。

    youdao

  • The interlayer exchange coupling between MAG1 and MAG2 may be optimized, in part, by adjusting the materials and thickness of the CL.

    MAG1和MAG2间的层间交换耦合可通过调节CL的材料和厚度而部分地优化。

    youdao

  • When the elastic cushion with appropriate thickness was used, the surface of the part is smooth and forming error is small.

    选择适当厚度弹性垫,可以得到表面光滑、成形误差较小的工件。

    youdao

  • The results show that the thickness of a part wound with a heated mandrel is limited by the highest temperature of mandrel and the thickness of that wound with a flame is unlimited.

    结果显示:热芯缠绕时制件的厚度受芯模温度限制,而火焰缠绕则不受限制。

    youdao

  • During the Early Ordovician, a suit of carbonate-evaporites had deposited in the east part of the Ordos, which is now known as the Majiagou Formation and up to approximately 1000 meters in thickness.

    早奥陶世马家沟期,在鄂尔多斯东部的陕北地区沉积了近千米厚的碳酸盐岩-蒸发岩地层。

    youdao

  • The thickness prediction of thin layer or thin interbedded strata is an important part of lateral reservoir prediction.

    薄层、薄互层厚度的预测是储层横向预测的一个重要环节。

    youdao

  • The thickness of the high elastic part 22 becomes gradually larger from the inside to the outside along the inclined surface 24 .

    高弹性部(22)的厚度沿着倾斜面(24)从内侧到外侧逐渐变大。

    youdao

  • The thickness of the low elastic part 20 becomes gradually larger from the outside to the inside along the inclined surface 24.

    低弹性部(20)的厚度沿着倾斜面(24)从外侧到内侧逐渐变大。

    youdao

  • The homogenization of sheet thickness distribution is improved. Finally, viscous pressure forming of conical part at room temperature and warm temperature were conducted.

    分别进行了室温和加热时铝合金圆锥形零件粘性介质压力成形试验,试验结果与数值模拟具有相同的规律。

    youdao

  • The effective elastic thickness of continent can correspond to only a part of the lithosphere, not to the total lithosphere.

    大陆岩石圈等效弹性厚度往往只与岩石圈内部的某些岩层相关,因此它可能不代表一般意义上的岩石圈厚度。

    youdao

  • Textile conveyor belts - Full thickness tensile testing - Part 1: determination of tensile strength, elongation at break and elongation at the reference load.

    织物传送带。全厚度拉伸试验。第1部分:拉伸强度、断裂伸长率和标准负荷下伸长率的测定。

    youdao

  • When in different part or the casting thickness not equal, the die-casting magnesium alloy AZ91D has different mechanical property.

    压铸镁合金az 91d铸件依部位和厚度不同,力学性能也不同。

    youdao

  • The results show that the shrinkage of injection molding part is increased with thickness of parts in non-linearity, and the increase momentum is moderated with the increase of thickness.

    结果表明,制品厚度对其成型收缩的影响很大,制品厚度增大时,注射成型收缩率增大,但这种增大的趋势是非线性的,而是随着厚度的增加而逐渐减缓。

    youdao

  • Typical cycle times run 60 minutes up per part via RTM. However, the cycle time of CMC is only 3-7 minutes depending on the thickness of the sheet.

    传统树脂转注成型的成型时间约为60分钟一个循环。但是,CMC的成型时间依不同厚度要求只需3-7分钟。

    youdao

  • On the upper part of foundation in the ancient city, there is a large number of miscellaneous fill which is mainly composed of stove ashes and is variable in thickness.

    在古城区建筑地基上部,广泛赋存以炉灰渣为主要成分的杂填土,其厚度不一。

    youdao

  • The Yecheng foreland basin is a part of the southwest sag of the Tarim Basin and contains late Cenozoic molassic deposits with great thickness.

    叶城盆地属于塔里木盆地的西南坳陷,在晚新生代沉积了巨厚的磨拉石建造。

    youdao

  • Estimating that the denudation thickness in the east part of basin is more intensive than that in the west part of basin by means of acoustic transit time, wells correlation, etc.

    通过声波时差、联井剖面地层对比等方法估算了盆地早白垩世的剥蚀厚度,总体格局是盆地东部剥蚀程度强烈,盆地西部剥蚀程度较小。

    youdao

  • Maximize the number of parts processed per load. The more parts in a machine load, the better the capability to overcome incoming part-to-part thickness variation and total thickness variation (TTV).

    使每次抛光过程中砂轮所接触的产品部分总面积达到最大,这样的话,就能更好地克服抛光产品的各部分厚度变化和总体厚度变化(即TTV)。

    youdao

  • Through an example, the key problems of the small precise thin-thickness plastic part molding in injection mold were discussed. The solution was put forward.

    结合一个例子探讨了小型精密薄壁塑件成型模具设计中的一些关键性问题,并提出了一些可行的方法。

    youdao

  • Through an example, the key problems of the small precise thin-thickness plastic part molding in injection mold were discussed. The solution was put forward.

    结合一个例子探讨了小型精密薄壁塑件成型模具设计中的一些关键性问题,并提出了一些可行的方法。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定