The paper also Outlines how the Semantic Web can be used to manage the interoperability between sensor networks and social networks.
该论文还简要介绍了语义网络科用于管理传感器与社会化网络之间的兼容性。
This paper introduce a new calibration of platinum resistance sensor non-linear mathematical method.
本论文介绍了一种新的校正铂电阻传感器非线性的数学方法。
Basedg on Fourier optical principle, the imaging property of grating illuminated by expansion source is analysed in this paper. Hence an innovative grating imaging displacement sensor is designed.
该文应用傅里叶光学原理对扩展光源照明下光栅的成象特性作了分析，并由此设计出一种新型的光栅成象型位移传感器。
This paper adopts harmonic choice method to design fluxgate signal processing circuit in allusion to the environment magnetic field strength signal of fluxgate sensor detecting.
针对磁通门传感器检测到的环境磁场强度信号，运用谐波选择法，设计了磁通门信号处理电路。
A system measuring soil moisture in sunlight greenhouse is studied and designed in the paper and the plan design, circuit design and choice of sensor are introduced.
通过研究设计了可用于温室土壤水分的测量系统，介绍了其方案设计、电路设计和传感器的选择等问题。
So this paper proposes resolving schemes of data collection in wireless sensor networks of both plane model and linear model.
因此，本文针对平面模型和线性模型，分别提出了无线传感器网络数据收集问题的解决方案。
The results show that the error of estimated value of both throttle position sensor and manifold pressure sensor are less than 10%, and the strategy put forward in this paper is valid.
结果显示，大部分工况下进气压力传感器和节气门位置传感器的信号重构误差可控制在10%以内，表明了所提出的调节策略是切实有效的。
This paper analyzes theoretical points of the implementation for high performance control of induction motor without speed sensor.
文章分析了交流感应电机无速度传感器的高动态性能控制方案的控制要点。
The development and application of BOD microbial sensor was introduced in this paper.
介绍了BOD微生物传感检测仪的研究进展及应用前景。
This paper discusses the processing circuit and features of the CMOS miniature camera used as a graphic sensor in the real time photoelectric displacement measurement.
本文将讨论微型CMOS电视摄像机作为图像传感器在实时光电位移测量时的处理电路及性能分析。
This paper refer hybrid sensor types to activation of power supply, activation of light source, silicon microtechnology.
本文评述的混合光纤传感器类型范围涉及：电源驱动、光源驱动、硅微技术。
This paper analyzes the error of torque sensor of strain-resistor which derives from the influences of bending moment on elastic axis, and discusses the Eliminating techniques.
本文对在应用应变式扭矩传感器时由于在弹性轴上的弯矩而引起的误差进行了力学分析，并提出了消除的方法。
The automatic internal girth weld tracker using contact type guide wheel as sensor is introduced in this paper.
本文介绍了一种利用接触式导轮作为传感器的内环焊缝自动跟踪装置。
A closed loop controlled ignition system with the use of an optical fiber dynamic combustion pressure sensor is presented in this paper.
介绍了一种应用光导纤维动态燃烧压力传感器的点火闭环控制系统。
This paper presents an extended kalman filtering algorithm for tracking infrared target, using the outputs from a forward-looking infrared (FLIR) sensor as measuring value.
本文提出了一种直接把红外前视传感器的输出作为测量值来跟踪红外目标的扩展型卡尔曼滤波跟踪算法。
In this paper, a kind of sensor with constant power pulse width modulation and force balance is described and analysed theoretically.
本文设计了一种恒功率脉冲调宽式力平衡式传感器，并从理论上对它作了分析。
In this paper, the major techniques and results relating to image processing, control, sensor fusion as well as team cooperation are presented.
本文主要介绍图像处理、控制、传感器融合和团队协作等方面的关键技术和结果。
This paper presents the work princi-ple. hardware design. two settlement ways of sensor of the instrument.
本文介绍了该仪器传感器的两种安置方法及仪器的工作原理和硬件设计等。
This paper proposes a restart method for an asynchronous motor drive system without speed sensor.
介绍一种无速度传感器异步电动机拖动系统的再起动方法。
This paper develops an accelerated life testing method for gas sensor taking CO(carbon monoxide) sensor as an example.
本文以CO传感器为例，提供了一种气体传感器加速寿命试验方法。
This paper introduces the calibration system and static and dynamic calibration method of an engine intake manifold pressure sensor.
介绍了发动机进气歧管压力传感器的标定系统和传感器静、动态标定方法。
This paper presents the fault tolerant strategy of valve management under the failure of valve opening sensor via signal reconstruction.
本文基于解析冗余原理，提出用信号重构的方法来实现单个阀位传感器故障下的容错阀门管理。
To the specific features of wireless sensor network and attack models met with routing protocols, this paper presents an attack detection model of combined distribution based on grey theory (GADM).
针对无线传感器网络自身特殊性和路由协议面临的攻击类型，提出了一个基于灰理论的分布联合的攻击检测模型(GADM)。
The theoretical design and calculation of the circular-section I-shaped beam shearing force sensor have been emphasized in this paper.
本文着重论述了圆截面工字梁剪力传感器的理论设计与计算。
This paper examines the possibility and necessity of using micromachining technology for sensor manufacturing.
讨论利用微机械加工技术制作传感器的可能性、必然性。
Through field survey, this paper illustrates there are two factors (motion sensor compensation and sound velocity) mainly effect acquired data quality.
经过野外调查，本文例证了两种要素(运动传感器补偿和声速)影响获得数据质量。
This paper presents a new insertion sensor for quick measuring moisture content of cereals, oilseeds and oils and it's working mechanism, structure and functions.
介绍一种用于粮食、油料、油脂水分快速测定的插杆式传感器，论述了传感器的工作机理、结构和功能特点。
The thickness of paper is measured using the linear area of the characteristic curve of an optic-filter sensor.
介绍了一个设计性实验—利用反射式光强位移传感器工作特性曲线上升沿的线性区测量纸张厚度。
The thickness of paper is measured using the linear area of the characteristic curve of an optic-filter sensor.
介绍了一个设计性实验—利用反射式光强位移传感器工作特性曲线上升沿的线性区测量纸张厚度。
应用推荐