The effect of compatilizer and toughener on the properties of modified PA6 /PA66 is studied.
研究了相容剂、增韧剂对改性尼龙6/尼龙66合金性能的影响。
Flame retarded fiberglass reinforced PA66 and PA6 were prepared by adding melamine polyphosphate (MPP).
采用聚磷酸三聚氰胺（MPP）分别对玻纤增强的PA66和PA6进行了阻燃。
The effect of various flame-retardants on the properties of glass fiber reinforced PA66 is compared and analyzed.
比较和分析了不同类型阻燃剂对玻纤增强尼龙（PA）66性能的影响。
The influences of glass fiber (GF) and glycol on the mechanical properties and microstructure of PA66/GF composite were studied.
研究了玻璃纤维（GF）、乙二醇对PA66/GF复合材料性能和微观结构的影响。
The formulations, mold selection and technical conditions for preparing the flame-retardant & reinforced PA6 and PA66 are studied.
探讨了阻燃增强PA6及阻燃增强PA66的制备配方、模具选择及工艺条件。
Nano-hydroxyapatite slurry (n-HA) was used to make composite with medical grade polyamide 66 (PA66) and high-density polyethylene (HDPE).
应用纳米羟基磷灰石（nHA）、聚酰胺66（PA66）和高密度聚乙烯（HDPE）制备了生物医用复合材料。
It originated in Europe, the regular insulation is PA66, there are two kinds of its production methods: hardtop method and traction method.
它起源于欧洲，目前正规的隔热条是PA66，它的生产方法有两种：硬顶法和牵引法。
The effects of red phosphorus flame-retardant masterbatch on the flame-retardant properties of glass fiber reinforced PA66 were investigated.
研究红磷阻燃母粒对玻纤增强尼龙66（PA66）阻燃性能的影响。
The toughness of PA6, PA66 will be improved by adding polyolefin, highperformance engineering plastics, inorganic non-elastomer and other PA.
目前，人们通过向PA6、PA66 中添加聚烯烃、高性能工程塑料、无机非弹性体及PA 间共混等方法来提高PA6、PA66的韧性，不断开发增韧PA6、PA66的新品种。
The formulation and technology of the special material of extruding PA66 profile bar produced for cold bridge by twin-screw extruder were introduced.
介绍采用双螺杆挤出机生产冷桥用PA66挤出异型条专用料的配方及工艺。
The addition of PHE also reduced the melt temperature of blends, which result from the dilution effect of PHE that reduced the degree of PA66 crystal.
由于PHE的加入起到稀释效应或是使得PA66晶体的完善程度降低，从而使得共混物的熔点降低。
Carbon nanotubes in the composite acted as nucleating agent, increased the nucleation rate of PA66, however, reduced its overall rate of crystallization.
碳纳米管在复合材料中充当了成核剂，提高了PA66的成核速度，但降低了其结晶总速度。
The processing conditions can also affect the phase morphology. We find that under the stronger shear force the disperse phase of PA66/PHE blend are smaller.
同时，加工条件也会对相形态产生影响，我们发现在强的剪切作用下，PA66／PHE共混物的分散相尺寸更小。
The results showed that the properties of PA66 were improved and the cost of material was decreased with the addition of the superfine acicular datolite short-fiber.
实验表明，超细针状硅灰石短纤维的加入不仅使PA66的各种性能得到改善，而且原料成本有所下降。
The melting temperature, melting heat, static and dynamic mechanical properties of PA6/PTFE blends and PA66/PTFE blends are experimentally investigated in this paper.
研究了PA6/PTFE和PA66/PTFE共混物的熔融过程的热学性能、动态力学性能和吸水前后的静态力学性能。
This article makes a brief introduction about the sorts and mechanism of fire retarded of some non-halogen fire retardants which are usually used in fire retarded PA66.
笔者综述了近几年尼龙- 66常用无卤阻燃剂的种类及其阻燃机理。
The feeding head shape of a die and a streamlined sprue runner were designed after an analysis on the cross sectional shape and the extrusion forming ability of PA66 material.
通过对异型材截面形状及原材料挤出成型性能分析，设计了正确的口模形状及合理的流线形流道；
Nowadays, it has been the main research hot point to exploit and research of ultratoughness and high-powered PA6, PA66 blends by adding polyolefin elastomer orusing nano-technology.
特别是通过聚烯烃弹性体、纳米级材料方法研制开发高韧性、高性能化PA6、A66 合金，是目前增韧PA6、PA66的主要研究方向。
This article discusses the changes in properties, in particular with regard to frictional resistance and the enormous reduction in wear, which can be achieved by adding aramid to PA66.
本文讨论了性能上的变化，特别是在改进耐摩擦性和大量减少磨损时的性能变化，这种改进是通过在PA66中添加芳胺纤维达到的。
When PHE with small particle size (remarked as PHE-S) was used, the impact and tensile strength of PA66/PHE blends were improved by the addition of the PHE, and presented synergistic effect.
当使用小颗粒尺寸的PHE时，PA66／PHE共混物的冲击强度有所提高，拉伸强度则略高于纯的尼龙66，但是两者都呈现协同效应。
Mechanics properties of PPS/PA66 blends is studied. Effect of different proportion on properties of bends system is investigated. An optimized formulation is given for industrial manufacture.
研究了国产PPS与PA66共混增强体系的力学性能，考察了不同配比对共混体系性能的影响。从工业化生产的角度优化出了综合性能较优异的配方。
This kind of screw can be used in special engineering plastics which containing more than 40% fiberglass, mineral fiber, PPA, PPS, PA66 , LCP, VO fireproofing materials, iron powder, magnetic etc.
适用各类添加40%以上的玻璃纤维，矿纤维及PPA、PPS、PA66、LCP、VO防火料、铁粉、磁粉等特殊性工程塑料，产品具有耐磨、抗腐蚀、耐高温密度高等优点。
This kind of screw can be used in special engineering plastics which containing more than 40% fiberglass, mineral fiber, PPA, PPS, PA66 , LCP, VO fireproofing materials, iron powder, magnetic etc.
适用各类添加40%以上的玻璃纤维，矿纤维及PPA、PPS、PA66、LCP、VO防火料、铁粉、磁粉等特殊性工程塑料，产品具有耐磨、抗腐蚀、耐高温密度高等优点。
应用推荐