The use of the lensed fiber can improve the fiber output beam brightness greatly.
通过这项技术，可以有效提高光纤输出光束的光亮度。
The experiment results of laser output beam pointing stability by measured with CCD camera is prevented.
报导用CCD摄像机检测激光器输出光束的指向稳定性的实验结果。
The correlative experiments show that laser output beam quality becomes worse when the laser works longer.
实验验证了激光器输出光束质量随出光时间的延长而逐渐变坏。
Finally TAT software framework for the space structure, the framework of the output beam reinforcement beams.
最后用TAT软件进行框架的空间结构计算，输出框架梁柱配筋梁。
Numerical simulation and experimental results show that the output beam quality can be improved taking a convex face as the output end of a fiber laser.
结果表明，采取凸端面作为光纤激光器的输出端可以提高输出激光的光束质量。
The output beam of diode pumped solid-state laser(DPL) has minute random variation in direction, which results in the restrictions on the appliance of DPL.
二极管泵浦固体激光器（DPL）输出光束的方向在某个微小范围内存在随机变化，这种光束指向性的波动在某种程度上严重制约了DPL的应用。
The experiment shows that the higher the pump power is, the smaller the thermal focal length is, and the worse the thermal effect influent the output beam quality.
实验结果表明，抽运功率越高，热焦距越小，热效应对输出光束质量影响越严重。
With the successful development and promotion application of high-power laser, the quality of optical fiber output beam constraints the application of optical fiber.
随着大功率激光器的研制成功和推广应用，光纤输出光束的质量制约着激光器的应用。
Calculations show that polarization degree of partial polarized light beam present certain distribution on the cross section of reflected output beam from interface.
计算表明一定偏振度的入射部分偏振光束经界面反射后，反射光束偏振度由于界面反射在反射光束截面上将产生一定分布。
In this paper, a new method to improve the intensity homogeneity of the output beam of an excimer lasers is introduced. Experimental results and a concise analysis are presented.
介绍了一种改善准分子激光输出光束光强均匀性的新方法，给出了实验结果和简要的分析。
The beam in the cavity and the output beam of the laser, if they occur in free space rather than waveguides (as in an optical fiber laser), are, at best, low order Gaussian beams.
如果激光光束洞和激光输出束出现在自由的空间，而不是波导（如光纤激光器），那么充其量也就是低阶高斯光束。
The experimental result shows that the depth of hardened zone and smoothness of surface can be controlled conveniently by varying the power output beam diameter and scanning rate of laser light.
试验表明：通过调节激光器的输出功率、光斑直径和扫描速度可以方便地控制熔化层深度和表面平整度。
The invention is simple and easy in operation, and vastly improves the output beam stability of the pulse tuning Q laser on the basis of satisfying the demand of the system on laser at any time.
本发明简单易行，在随时满足系统对激光需求的基础上，大幅度地提高了脉冲调q激光器的输出光束稳定性。
A ruggedized design method for shaping diode laser beams, which can totally eliminate the effects caused by the temperature change or laser wavelength shift on output beam direction, is described.
本文叙述了一种变形双棱镜的加固设计方法，它能够完全消除温度变化与激光波长漂移对光束输出方向的影响，适于对二极管激光束进行变形。
Admittedly, the energy needed to produce a Cepheid-modulating neutrino beam really would be a sizeable fraction of the output of the sun.
应当承认，制造用来调整“造父变星”的中微子束所需要的能量确实将相当于太阳整体输出能量的大部分份额。
The basis of applications is the output of X-ray laser with high brightness, high coherence, and good beam quality So it is a main aim and contents for studies to achieve X-ray laser.
应用研究的前提是获得能够满足应用要求的X射线激光输出，因此如何获得高亮度、高相干性、高光束质量的饱和X射线激光输出是X射线激光研究的首要内容。
With good beam quality, the stability of output laser power, it is easy to adjust the marking effect.
光束质量好，输出激光稳定性高，打标效果较易调试。
A solid state laser operated at lower-order mixed mode possesses both advantages of high output power and good beam quality.
当固体激光器运转在低阶混合模时，既可得到较高的功率输出，又可保证较好的光束质量。
Maked use of beam combination, laser power will be achieved higher than single output of laser.
利用光束合成可获得比单个激光输出功率更高的激光束。
The calculated results show that its effects on the average laser output power and beam quality are noticeable.
计算结果表明，这种热效应对激光输出平均功率与光束特性有不可忽视的影响。
Partially end-pumped slab laser is an innovative solid state laser. Combining the hybrid resonator with partially end-pumping, the output power can be scaled at high beam quality(called InnoSlab).
部分端面抽运的板条激光器是一种新型固体激光器，配合混合腔可以实现在大功率下保持高光束质量的激光振荡输出。
The influences of thermal effects and the matching of the laser mode radius with the pump spot radius on the output power and beam quality are discussed.
讨论了激光晶体的热效应以及激光模半径与泵浦光斑半径匹配对激光输出功率和输出光束质量的影响。
The results show that the hybrid resonator is suitable for slab laser to obtain a good beam quality output laser.
实验结果表明，在复合板条激光器中可以采用混合谐振腔获得较好光束质量的激光输出。
Influence of position of output mirror on beam of two rod solid state laser has been analysed by means of matrix optics and experiment.
采用矩阵光学理论和实验相结合的方法，分析了输出镜对双棒串接固体激光器输出光束的影响。
They are deadly unless you have high damage output units or disablers like Graviton Beam.
除非你有高伤害输出单位或控制技能强的单位比如凤凰的重力力场，否则它们是非常致命的。
This paper suggests that the main cause of the beam drift of laser output is capillary sway due to unstable thermal conduction.
本文认为，输出光束的漂移主要是器件不稳定热传导引起毛细管摆动所致。
Phase conjugate resonators offer the potential to increase laser output and improve beam quality by virtue of their ability to correct for severe intracavity aberrations.
相位共轭光腔能消除腔内的波前畸变和介质扰动，从而能提高输出激光束的性能和质量。
The double-clad fiber laser has the advantages of simple structure and high reliability, high output power, high conversion efficiency, high beam quality.
它具有结构简单紧凑、输出功率高、稳定可靠、光电转换效率高、光束质量好等优点。
The structure type of spurting oil beam and the output voltage of DC power were the main factors affecting the electrostatic oiling.
喷油梁结构型式与直流电源输出电压是影响静电涂油的主要因素。
The structure type of spurting oil beam and the output voltage of DC power were the main factors affecting the electrostatic oiling.
喷油梁结构型式与直流电源输出电压是影响静电涂油的主要因素。
应用推荐