The optimum process conditions have been investigated too.
探讨了该反应的最佳工艺条件。
The optimum process of extracting capsaicin from chilli with ethanol was studied.
研究了乙醇浸提法从干辣椒中提取辣椒素的最佳工艺条件。
The optimum process is obtained through experiments, which is analyzed and studied in theory.
通过实验，得出了最佳工艺，并从理论上作了分析研究。
Finally, the optimum process scheme to prepare zeolites REY on the belt filter was brought up.
由此，提出工业REY分子筛在带式过滤机上生产的优化工艺方案。
The optimum process for preparing nanometer nickel oxide by the citrate-gel method was studied.
优化了柠檬酸盐凝胶法制备纳米氧化镍粉体的工艺条件。
It offers an optimum process model of Steckel mill and a basis of design and choice for Steckel mill.
提出了一种炉卷轧机最佳生产工艺方案。为炉卷轧机的设计和生产选型提供了依据。
The optimum process is that, the double-gating system in original process is replaced with a single-gating system.
得出的优化方案为将原始铸造工艺中的双直浇道结构改为较为简单的单直浇道系统；
The optimum process of controlled rolling and accelerated cooling for obtaining better mechanical properties is given.
给出了所用成分钢要得到较佳力学性能所需的一种控制轧制和加速冷却工艺制度。
The optimum process for desalination technology is studied and determined. The reclaimed rate of glutamic acid is 95%.
确定了脱盐最佳工艺流程，谷氨酸总的回收率可达95%。
The optimum process conditions are determined. The yield of cyclopentanone is up to 85% with a purity of more than 99%.
确定了适宜的工艺条件，环戊酮的收率为85%以上，环戊酮产品纯度大于99%。
Factors influencing the particle size of Glauber's salt is analyzed and the optimum process control condition is proposed.
文章分析了在元明粉生产过程中，影响产品粒径大小的因素，提出了最佳的工艺控制条件。
A new technology for synthesis of starch xanthate was studied, the optimum process conditions were selected via orthogonal tests.
研究了淀粉基黄原酸盐的合成新工艺，通过正交试验选定了最佳工艺条件。
Moreover, the optimum process parameters for the superplastic deformation of duralumin LY12CZ under an electric field are presented.
还介绍了硬铝ly12 CZ在强电场下超塑变形时的合理工艺参数。
The influence factors of temperature, pressure, space velocity, charge-in ratio were investigated. The optimum process conditions were determined.
通过考察温度、压力、空速、进料比等因素，确定最佳工艺条件。
In addition, the factors effecting inherent viscosity of the polymers were examined systematically and the optimum process conditions were determined.
同时，系统研究了影响聚合物特性粘数的诸多因素，从而确定了最佳工艺条件。
An optimum process planning method of this kind is presented. The main advantages of the method are simple, practical and with little calculating effort.
提出一种用于该类工序工艺规划的优化方法，该方法的特点是简单、实用、计算量小。
The system realized the automatic building of gating system, which provided a proximal optimum process for simulation validation and even practical production.
该系统实现了轻合金浇注系统工艺的辅助设计，为模拟验证以及实际生产提供较佳的推荐方案。
Research of zinc-air battery in this thesis includes: optimum process of air electrode preparing, assembly of button cell, design and assembly of cylinder cell.
本文对锌空气电池进行了以下研究：空气电极的制作工艺优化、扣式电池的装配和圆柱型电池设计与装配。
Through practice production, the optimum process condition is given, which can efficiently remove impurity on fiber and increase whiteness and content of cellulose.
通过生产实践，给出胡麻粗纱煮漂工艺条件，能有效地去除纤维上的杂质，提高白度和纤维素含量。
The optimum process of formaldehyde-free DP finishing on pure cotton fabrics with IA/MA is determined by analysis of single factor and multi-factor linear regression.
本文通过单因素分析和多元线性回归分析，确定了IA／MA纯棉无甲醛DP整理的最佳工艺。
Influence of dyeing process on single transmittance and degree of polarization was discussed. The optimum process was investigated by design of experiment methodology.
探讨了染色工艺对偏振片单片透过率和偏振度的影响，并通过正交试验确定了最佳染色工艺。
The optimum process parameters could be obtained using ANN model to describe relationships between process parameters and performance and GA to optimize process parameters.
说明用神经网络模型描述微囊制作参数与性能之间的关系，用遗传算法优化微囊制作工艺参数，能设计出性能最佳的微囊制作工艺参数。
Results Under the optimum process condition of flocculation impurity removal, gardenoside contents in the flocculation group is higher than those in 50% , 75% alcohol groups.
结果采用优化后的絮凝除杂工艺条件，絮凝组中栀子苷含量明显高于50％、75％乙醇醇沉组；
Properties of desizing enzyme, and scouring enzyme as well as their application in pretreatment were discussed. The optimum process conditions were settled by orthogonal test.
探讨了退浆酶和煮练酶的性能及其在前处理工艺中的应用，采用正交试验，确定了最佳工艺条件。
The effects of the main compositions in bath on deposition rate and corrosion resistance of the deposits are analyzed, and the optimum process is determined by orthogonal test.
运用正交试验分析了镀液中各主要组分对镀速及耐蚀性等影响，优选化学镀最佳工艺。
Factors affecting the reactions such as temperature, time, molar ratio have been studied and the optimum process was acquired. The mechanisms of each reaction were also discussed.
对影响反应的因素，如反应温度、反应时间、投料配比等进行了研究，确定了最佳的工艺条件，并对各步反应的机理进行了初步探讨。
The principal technical parameters of ferrite process for treatment of chromium containing wastewater are studied, it provides a basis for selection of the optimum process conditions.
对铁氧体法处理含铬废水工艺中的主要技术参数进行了探讨，为选择最佳工艺条件提供了依据。
The principal technical parameters of ferrite process for treatment of chromium containing wastewater are studied, it provides a basis for selection of the optimum process conditions.
对铁氧体法处理含铬废水工艺中的主要技术参数进行了探讨，为选择最佳工艺条件提供了依据。
应用推荐