The beam delivery system is optimized and simulated and its optical path and imaging quality diagrams are plotted.
对导光系统进行了优化和模拟，给出了导光系统的光路图及成像质量图。
First, the filter parameter is calculated with low pass prototype, then the parameter of the filter is optimized and simulated with microwave CAD software.
首先根据滤波器的低通原型设计、计算了滤波器的参数，并使用微波cad软件对设计的尺寸进行了优化、仿真。
Using the neural network and genetic algorithms approaches, the SLS sintering process and its post-treatment process have been simulated and optimized on the basis of a series of experiments.
本文在大量试验研究的基础上，应用神经网络方法和遗传算法对SLS的烧结过程和后处理过程进行了模拟和优化研究。
Using numerical simulation method, the forming process of joint tray was simulated, and its tradition technology was optimized.
运用数值模拟方法对连接盘的成形过程进行模拟，对其传统工艺进行优化。
The tool, part geometry, machining conditions, tool-path and the material removal process are simulated by computer simulating technology to gain a rational optimized milling plan finally.
通过计算机仿真技术，模拟刀具、工件几何体、加工环境及刀具路径和材料去除的过程，最终在加工之前得到了合理、优化的加工方案。
The parameters of the fuzzy neural network controller are optimized by the mixed learning methods with BP algorithm and Simulated Annealing algorithm which improves BP algorithm.
该系统的控制器采用模糊神经网络控制器，它的控制器参数采用模拟退火算法全局优化来对BP算法进行改进的混合方法。
Based on this, the design of casting process was optimized, the solidification process was simulated again, the results of simulation were compared and analyzed.
在此基础上对其铸造工艺进行了修改，工艺优化，又一次进行凝固模拟，对前后模拟结果进行了分析与比较。
The novel termination structure was simulated with TCAD(ISE). Simulation results showed that the novel structure featured excellent characteristics of optimized area and breakdown voltage.
采用TCAD（ISE）对该技术进行模拟，结果表明，该技术具有比较好的面积优化和击穿电压优化特性。
Some critical parameters of packaging and interconnection of the integrated LNA were simulated and optimized by using commercial 3d electromagnetic field analysis software HFSS.
利用商用三维电磁场分析软件HFSS对集成化低噪声放大器组装和互连中的关键参数进行了仿真和优化。
At the first time a permanent excitation structure is used in the design of CPA. The inner magnetic field of CPA is simulated and fundamental dimension of permanent magnet material is optimized.
首次提出采用永磁励磁的转子结构，并对补偿电机内部磁场进行了仿真，对磁钢的尺寸进行了优化设计。
Chloride ion migration and the choice of optimized current density during galvanostatic dechlorination of simulated cast iron artifacts in alkaline solution are studied by galvanostatic polarization.
采用恒电流阴极极化法研究了模拟铁器文物在碱性溶液中恒电流脱氯过程氯离子的迁出规律以及脱氯电流密度的选取原则。
A three dimensional unsteady numerical model of cemented carbide sinter-HIP furnace was established. The temperature field was simulated and optimized with this model.
建立了硬质合金烧结-热等静压炉内传热的三维非稳态数值仿真模型，对炉内的温度场进行仿真与优化。
The operation order of the container to be loaded or unloaded has been optimized and arranged through the simulated annealing algorithm.
运用模拟退火算法优化了集装箱装卸指令次序；
In order to improve the precision and stability of the road maintenance machinery, and guarantee it to work normally, the work parameters need to be simulated and optimized.
为了提高养路机械作业的精度和稳定性，保证正常作业，需要对其作业参数进行仿真和优化。
The structure and theory of Stepped Impedance Resonator (SIR) is proposed in this paper. A SIR band - pass filter is simulated and optimized by microwave CAD software.
介绍了阶跃阻抗谐振器(SIR)的结构和原理，在此基础上用微波cad工具仿真优化了SIR微带发卡带通滤波器。
It is simulated and optimized based on the method of EDA software. The parameter of different devices is calculated with optimum performance and higher yield.
同时采用基于EDA软件的仿真优化方法，对其进行了仿真优化设计，得出其在最优性能及较高的成品率下的各器件参数值。
Based on ADS and VNA, the filters had been simulated and optimized and the response of S21 had been measured. Final results show that achieve index requirements.
基于ADS软件仿真和优化，并用矢量网络分析仪进行测量其s21曲线，本设计最终结果与理论吻合，达到指标要求。
In this paper, the location and damping parameters of viscous dampers connecting adjacent buildings are optimized simultaneously and validated in simulated earthquake shaking table tests.
本文对连接相邻建筑的粘滞阻尼器的设置位置和阻尼参数进行了同时优化，并通过模拟地震振动台试验进行了验证。
With 3-dimension dynamic explicit solution procedure, the metal deformation process can be analyzed and simulated accurately and the process design optimized effectively.
利用三维动态显性算法，可以精确地分析和模拟金属变形过程，有效地优化工艺设计。
The separation of n-pentane, n-hexane and n-heptane mixture with the dividing wall column(DWC) was simulated with commercial software HYSYS, and the optimized operation region was obtained.
以正戊烷、正己烷和正庚烷为分离物系，在简捷计算结果的基础上，利用商业模拟软件HYSYS研究了进料热状态、进料组成和相对挥发度等进料性质对立式隔板塔操作的影响。
With simulated annealing method, and using total quality of underwater shell as the objective function, the structure parameters are optimized.
运用模拟退火算法，以水下航行器壳体的总质量最小为目标，对其结构参数进行全局优化设计。
The 3D microwave filter was simulated and optimized by the electromagnetic field analysis software and gained a finer result.
利用电磁场分析软件对三维微波滤波器进行了模拟和优化，得到了较好的结果。
The 3D microwave filter was simulated and optimized by the electromagnetic field analysis software and gained a finer result.
利用电磁场分析软件对三维微波滤波器进行了模拟和优化，得到了较好的结果。
应用推荐