A simple dynamic chemical etching device based on siphon principle is developed for fabrication of optical fiber probes which are commonly used in near-field optical microscopy.
基于虹吸原理，设计了一种动态化学腐蚀法的简易装置，用于制备近场光学显微镜光纤探针。
The rib fractography of cross-linked PMMA has been explored by optical microscopy.
用光学显微镜观察了交联有机玻璃断面上的肋状形态。
The morphology of as-grown crystal surface was investigated by optical microscopy.
用光学显微镜观察了晶体生长面的原生形貌。
Scanning near-field optical microscopy (SNOM) is a novel tool for the research down to nanometer scale.
扫描近场光学显微镜(SNOM)是一种能探测纳米尺寸的新型显微工具。
The lung of somatic nuclear transfer cattle was observed by optical microscopy and he staining techniques in this paper.
应用石蜡切片及HE染色技术对体细胞克隆黄牛的肺脏及其细胞类型和形态进行了详细的观察。
Objective To investigate the diagnosis efficacy of using ordinary optical microscopy to identify the source of hematuria.
目的探讨应用普通光学显微镜观察尿红细胞形态以判断血尿来源的诊断效能。
The microstructure evolution during the warm deformation is observed by optical microscopy (OM) and transmission electronic microscopy (TEM).
通过光学显微镜和透射电镜观察了温变形中的微观组织演变。
Experimental techniques such as optical microscopy and scanning electron microscopy were used to study fracture of press eccentric gear main shaft.
采用扫描电镜及光学显微镜对压力机偏心齿轮主轴断口进行了系统的分析。
The effects of the polymer network on the packing arrangement of the ferroelectric liquid crystal molecules are examined by means of optical microscopy.
通过光学显微镜可观察聚合体网络对铁电液晶分子组合排列的影响。
Effects of tin on the microstructure and mechanical properties of ZA62 alloys were investigated using optical microscopy, XRD analysis and tensile test.
采用金相显微镜、X射线衍射仪等分析测试手段，研究了锡对ZA62合金显微组织及力学性能的影响。
Both the diffusion couple specimens and the alloys were examined by means of optical microscopy, scanning electron microscopy, and electron probe microanalysis.
扩散偶和合金样品采用光学显微镜、扫描电镜和电子探针显微分析技术进行分析。
The failure of the powder metallurgy valve seat was analyzed by optical microscopy, scanning electronic microscopy, X-ray energy spectrum and X-ray diffraction.
采用力学、物理性能测试，金相、扫描电镜、能谱和X衍射分析研究了气门座圈产品失效的主要原因。
However, resolution of a traditional wide-field optical microscopy is limited to about 230 nm laterally and 1000 nm axially, due to the diffraction-limit of light.
但由于衍射极限的存在，使传统的宽场光学显微镜横向和纵向的分辨率分别仅约为230nm和1000 nm。
Confocal scanning optical microscopy (CSOM) includes transmission type and reflection type as well as coherent incident light type and incoherent fluorescent light type.
共焦扫描光学显微(CSOM)系统有透射式和反射式、相干光和非相干光荧光等类型。
Reasons of failure in cooling pipe of the reactor have been studied by the chemical composition analysis, optical microscopy examination and electron probe microanalysis.
应用化学分析、金相和电子探针显微分析技术对反应器中冷却水管的失效原因进行了分析。
In order to improve the experimental teaching quality of morphology, the traditional mono-functional optical microscopy is updated by the digital microscope mutual system.
为了提高形态学实验课的教学质量，将以往组织学教学中所使用的功能单一的传统光学显微镜更新为显微数码互动系统。
Confocal scanning optical microscopy (CSOM) is a high precision microscopical image system which based on the confocal principle, scanning technology and image processing.
共焦扫描显微成像系统(C SO M)是以共焦原理为基础，集扫描技术和数字图像处理技术为一体的高精度的成像系统。
When biological cells or tissue thick specimens are imaged by bio-optical microscopy, image resolution decreased significantly due to the impact of diffraction and defocus.
生物光学显微镜对生物细胞(组织)厚样本成像时，由于受衍射和散焦成份的共同影响，成像分辨率明显下降。
The microstructure of the welded joints was studied by optical microscopy. It is found that the weld nugget has a dynamic recrystallization, fine isometric crystal structure.
通过对焊接接头组织的分析，发现焊核区晶粒为明显的细化再结晶等轴晶；
The abnormal block and black round structure of 50 axletree steel was studied and analyzed using optical microscopy, transmission electron microscopy, electron probe and so on.
用光学显微镜、透射电子显微镜以及电子探针等现代材料试验手段对50钢中存在的大块黑色团状异常组织进行了研究和分析。
The surface defect on medium and heavy plate Q235B was investigated by means of the optical microscopy, scanning electron microscopy and energy spectrum analysis in this paper.
对Q 235 B中厚板表面缺陷处的显微组织、非金属夹杂物等进行了金相组织和扫描电镜观察及能谱分析。
Microstructure of simulated coarse grain heat affected zone (CGHAZ) of Zr Microalloyed HSLA Steel are investigated using optical microscopy and transmission electron microscopy.
采用光学显微镜和透射电镜研究了锆处理对微合金钢粗晶热影响区组织的影响。
The quenching sensitivity of 7050 aluminium alloy hot-rolled plate was studied by using end quenching test and optical microscopy (OM) and transmission electron microscopy (TEM).
用末端淬火、光学金相显微镜和透射电镜技术研究7050铝合金热轧板的淬火敏感性。
The microstructure and properties of the composite coatings were investigated by optical microscopy, X-ray diffractometer, electron probe microanalyzer and a skimming wear machine.
利用金相显微镜、X射线衍射仪、电子探针及滑动磨损试验机，研究了合金熔覆层的显微组织及性能。
The transmitting and reflecting optical microscopy has been used in the electrolytic polishing process for monitoring the polished specimen to obtain the optimum polishing condition.
在电解抛光过程中用透射和反射光作显微镜观察，借以监视抛光样品，使获得最佳抛光条件。
The effects of minerals (oxides) on coke microstructure are studied by adding 13 types of different oxides into coal to carbonize using optical microscopy and X-ray powder diffraction.
将十三种矿物质（氧化物）添加到煤中炭化，用光学显微镜和X射线衍射方法研究矿物质的存在对所得焦炭显微结构的影响。
The effects of minerals (oxides) on coke microstructure are studied by adding 13 types of different oxides into coal to carbonize using optical microscopy and X-ray powder diffraction.
将十三种矿物质（氧化物）添加到煤中炭化，用光学显微镜和X射线衍射方法研究矿物质的存在对所得焦炭显微结构的影响。
应用推荐