Firstly, the data on preparation teeth was retrieved by the 3D-optical measuring system.
该方法首先利用三维激光测量仪对牙预备体模型进行数据测量；
This tester adopts programming by computer software, high magnification optical measuring system and photoelectric sensor etc such technique.
该机采用计算机软件编程，高倍率光学测量系统，光电传感等技术。
The aircraft used high-rate optical measuring system, equipped with a rotary encoder of the eyepiece micrometer will further enhance the process of measuring the degree of automation.
该机采用高倍率光学测量系统，装有旋转编码器的测微目镜可进一步提升测量过程自动化的程度。
This fluorescence fiber-optical measuring system for measuring the concentration of benzoyl urea pesticides has several characteristics such as high sensitivity, wide linear range and low cost, etc.
研制的苯甲酰脲类农药浓度测量荧光光纤测量系统具有灵敏度高、线性范围宽、成本低等特点。
This measuring system is composed of worktable, clamping and adjusting structure, optical system, digital camera, image card and computer. Picture 1 is system structure diagram.
本测量系统硬件主要由工作台、数码像机夹持及调整机构、光学系统、数码像机、图像采集卡和计算机组成，系统结构简图如图1所示。
The theodolite designed for measure ship is a special optical equipment based on TV tracking and measuring for the use of navigation orientation system.
船载经纬仪是远洋航天测量船导航定位系统专用光学测量设备。
Based on this principle, a method is described in this paper of measuring OTF of an optical system by means of scanning photometric microscope eyepices.
基于这一原理，我们研究了一种使用扫描显微镜和微计算机测量光学传递函数的方法。
A new kind of generator rotor temperature measuring system is designed based on optical absorption behavior of GaAs semiconductor.
根据砷化镓半导体的光吸收特性，设计了一种新型的发电转子温度测量系统。
The measuring principle, optical system, circuit design, error analysis and function features of the device are introduced.
介绍了该装置的测量原理、光学系统、电路设计、精度分析和性能特点。
An optic interferometer system based on optical multiplication for measuring absolute distance was presented.
介绍了一个基于光学倍乘原理的绝对距离干涉测量系统。
This method was changed from measuring the dimension difference to the time difference measurement by using an optical system and circuitry.
这种方法利用一光学系统和电路，把线值差转换为时间差来测量。
The paper proposes a stereo vision coordinate measurement system based on optical probe with the function of measuring and calibrating.
提出了一种基于测量与校准功能合一的光学测棒的立体视觉坐标测量系统。
The instrument for measuring the parallel of the multi?axis optical system with video output was designed.
设计了用于测量输出为视频图像信号的多光轴光学系统的光轴平行度校正仪器。
Methods a double-integrating-spheres system, basic principle of measuring technology of light radiation and biological tissues optical model were used for the study.
方法实验采用了双积分球系统和光辐射测量技术的基本原理以及运用生物组织的光学模型。
A simple photoelectric system is described in this paper. We choose the optimum diaphragm through measuring the optical transfer function with different dimensional double ringed diaphragms.
设计了一个简单的光电系统，测量了不同尺寸的双环光阑的光学传递函数，从中选出了最佳光阑。
An advanced measuring system with tri fiber optical probe has been developed to measure two dimensional bubble velocity.
开发了一套新型的三探头单纤光导探针测量系统，用于测量二维气泡速度。
Differing from the traditional optical measuring method, the measuring system USES two CCD cameras to record projection grating, thus reduces errors and improves measuring accuracy.
与传统的光学测量方法不同，测量系统采用两个CCD相机记录投影光栅，减小了测量误差，提高了测量精度。
During the photoelectric conversion process of output signal from optical torque sensor, DC level drift error induced by temperature influence will affect the measuring accuracy of the system.
光扭矩传感器的输出信号在进行光电转换过程中，由于温度影响，造成了直流电平漂移误差，影响系统的测量精度。
According to this measuring principle, photo-electric optical lever is used in pulling and stretching measuring instrument to develop a high-accuracy intelligent system to measure Youngs Modulus.
并根据此测量原理，将光电光杠杆应用于拉伸法杨氏模量测量仪中，设计了一种高精度杨氏模量智能测量系统。
The basic principle of measurement is presented. The optical system, hardware controlling system and measuring software are designed.
介绍了测量原理，设计完成了相应的光学测量系统、硬件控制系统和控制测量所需的软件。
An automatic, convenient measuring system for the axial mechanical characteristic of the optical disks is desirable for the optical system designers and optical disks providers.
光盘系统的开发者和光盘介质的提供者需要一种能自动、方便测量光盘轴向机械动态特性的测试系统。
A new technique for measuring the accurate position of the focal plane of an optical system with position sensitive detector (PSD) is presented.
本文介绍一种新的焦面检测方法，以位置敏感探测器P SD作为检焦器件对光学系统的实际焦面进行检测。
This measuring system is specially designed to solve the diameter and distance of exit pupil of the gun optical sighting for some factory.
本测试系统是为解决某单位枪用光学瞄具出瞳直径、出瞳距离的测试而研制的。
The following put forward the method that measuring distortion of optical image system by means of digital image interrelated technique accuracy.
本文提出用数字图像相关技术高精度测量光学成像系统的畸变。
In this paper, an optical-sonde system for measuring the shape of a two-dimensional flying plate and the corresponding data treatment method are described.
本文介绍了一种测量二维形状飞片的光探测系统及其数据处理方法。
This paper described the measurement principle of CCD measurement system based on the design of a color CCD measuring system of the whole structure, including the optical system and collection system.
本文在阐述了CCD测量系统的测量原理的基础上，设计了彩色CCD测量系统的整体结构，主要包括光学系统和采集系统。
A laser wavelength measurement system in the LabVIEW environment by measuring the distance of the interference fringes on the optical wedge is introduced in this paper.
为了在较宽波长范围内准确快速测量激光波长，在虚拟仪器环境下，通过测量光学劈尖上的干涉条纹间距的方法实现了激光波长测量。
The paper also presents the design method of optical system about the flame temperature measuring instrument and some experimental results.
也叙述了火焰温度测量仪器的接收系统的设计方法。
The single optical path measuring system is adopted in traditional polarimeter and its precision is not high, mainly affected by the instability of light source.
传统的偏振测量仪由于采用单光路测量系统，测量精度受光源稳定性限制较大。
The measuring system consists of a laser diode, an optical ring pattern generator and a CCD camera.
测量系统主要由半导体激光器、环形光发生器以及CCD摄像机组成。
应用推荐