The results show that the AOFRR is sensitive to external optical injection and demonstrate various dynamic characteristics.
实验结果表明有源光纤环对外光注入极其敏感并能展现出不同的动态特性。
10 years working experience in optical injection mold, have rich ptical injection mold and mechanical processing professional knowledge.
十年以上光学注塑模具工作经验；具备光学注塑模具与机械加工专业知识；
We experimentally obtain the route from period doubling to chaos in an active optical fiber ring resonator (AOFRR) with optical injection.
我们利用外光注入有源光纤环形腔，从实验上获得了从周期走向混沌的路径。
In this paper, a method of chaotic controlling is presented via controlling the phase in semiconductor lasers under to external optical injection.
提出外部光注入半导体激光器混沌相位控制方法，通过周期调制注入光的相位相移将激光器的混沌控制到多种周期状态。
A semiconductor laser, when subjected to perturbation such as optical feedback, optical injection, optoelectronic feedback, can display chaotic output.
半导体激光器在受到如光反馈、光注入、光电反馈等扰动下，可得到混沌输出。
The optimal intensity noise suppression of a Fabry-Perot (FP) laser is experimentally acquired by relatively strong external optical injection locking technology.
采用较强的外注入光锁定FP激光器，获得了理想的强度噪声抑制效果。
Meanwhile, the effect of optical injection in erbium-doped fiber laser was investigated, and the optimized wavelength to control the lasing wavelength has been found.
此外，还研究在掺铒光纤激光器中注入光实现波长可开关的光控机制并找到了抑制腔内激发波长的最优注入光波长。
The results have significant reference value to design of the chaotic synchronization secure communication system based on incoherent optical feedback and incoherent optical injection.
研究结果对非相干光反馈与非相干光注入激光混沌同步保密通信系统的设计具有重要参考价值。
The key technology of fabricating plastic optical component is the designing and fabricating moulds, the selecting proper injection equipment, the optimizing injection technology parameter, and so on.
塑料光学元件的关键制造技术是模具设计和制造、选择合适的注塑设备、最佳的工艺参数等。
In the light of improving injection molding technique and mold making technique, the measures for improving the quality of plastic optical elements are given.
从改进注射成型技术和模具制造技术的角度介绍了提高塑料光学零件的质量所采取的措施。
Optical disk is one of the representative products of precision injection molding technology.
光盘是目前精密注塑技术的标志性产品之一。
Amutual pulse injection-seeding scheme is developed to generate tunable dual-wavelength optical short pulses by the use of two gain-switched fabry-perot (F-P) semiconductor lasers.
报道了两个增益开关调制的法布里珀罗半导体激光器互注入锁定实验方案，可产生双波长可调谐光脉冲。
The retroreflector formed by arrays of cube corners is produced with the optical plastics by means of injection moulding.
角锥棱镜阵列式反射镜由角锥棱镜列阵构成，是用光学塑料注塑制造的。
Aiming at Advanced Encryption Standard (AES) implemented on a secret chip, this paper presents an optical fault injection attack method to get the secret information from microcontroller.
为获取芯片的秘密信息，针对其中的高级加密标准(aes)算法，提出一种光故障注入攻击方法。
The sensitivity of capillary electrophoresis is greatly limited due to the small injection volume and the short optical path length.
由于毛细管进样体积小以及在柱检测光程短，极大地限制了毛细管电泳检测灵敏度的提高。
Thereby, the appropriate processing parameters for injection compression molding of optical disk have been obtained.
从而最终获得光盘基片注射压缩成型所需的合适的工艺参数值。
Coherent optical feedback synchronization system can be divided into two categories: complete synchronization and injection-locking synchronization.
相干光反馈同步系统又分为：完全同步系统和强注入同步系统。
Based on the theory of total internal reflection (TIR) and injection effect of photo-induced carriers, a Y-branching TIR all-optical switch is fabricated.
基于全内反射原理和光生载流子注入效应，研究了一种Y分叉全内反射型全光开关。
Result:XST injection could reduced nerve cell apoptosis, and the intergral optical density of the apoptotic.
结果：血塞通能明显降低神经细胞凋亡百分率，降低凋亡神经细胞积分光密度，减轻病理损害。
Methods are disclosed to injection mold resins, like polycarbonate, to form solid optical lenses.
本发明公开一种注塑树脂如聚碳酸酯以形成结实的光学透镜的方法。
Residual stress is one of important indexes of evaluating the quality of injection molded parts, especially for optical products.
残余应力是评价塑料制品品质的一个重要指标，尤其是对高附加值的光学制品。
By substituting optical field equations for optical intensity equations, a theoretical model for injection locking of pulsed CO2 lasers is presented.
将多频动力学模型中的光强方程用光场方程代替，建立了脉冲co 2激光器注入锁定的理论计算模型。
By substituting optical field equations for optical intensity equations, a theoretical model for injection locking of pulsed CO2 lasers is presented.
将多频动力学模型中的光强方程用光场方程代替，建立了脉冲co 2激光器注入锁定的理论计算模型。
应用推荐