The magnetic flux density on the crack tip in a metal pipeline was studied by numerical simulation method.
用数值模拟方法研究了金属管道裂纹尖端磁通量密度的分布情况。
By utilizing numerical simulation method, the resonance characteristics of slope in earthquake are studied.
通过数值模拟的方法研究边坡在地震作用下的共振特点。
The cement samples damage and fracture by exploding load was studied by experiment and numerical simulation method.
从实验和数值模拟两方面对爆炸载荷对水泥试样的损伤破坏进行了研究。
We studied the effect of particle impacting-angle on development of aeolian ripples using numerical simulation method.
采用数值模拟的方法研究了沙粒冲击角对风成沙纹形成过程及其形态特征的影响。
The temperature field and thermal stress field on the crack tip in a metal was studied by numerical simulation method.
用数值模拟方法研究了金属裂纹尖端的温度场和热应力场的分布情况。
Furthermore, the research approaches were also given by using numerical simulation method and experimental simulation method.
还提出采用数值模拟与实验模拟相结合对该模型进行求解的研究思路。
After experimental tests the self simulation principle was used to develop the numerical simulation method to physical device.
经实验校模后利用自模化原理将数值模拟方法推广到实物装置上去。
Using numerical simulation method, the forming process of joint tray was simulated, and its tradition technology was optimized.
运用数值模拟方法对连接盘的成形过程进行模拟，对其传统工艺进行优化。
By numerical simulation method, the comparisons of aerodynamic performance between airfoil and plate blade axial fans were made.
采用数值模拟方法对机翼型及板型叶片的轴流风机的气动性能进行了比较。
This paper presents the numerical simulation method and calculation results for the flow around a high lift devices of airplane.
本文给出了飞机增升装置气动力特性的数值计算方法和计算结果。
Three-dimensional numerical simulation method is used in the design of a diesel engines helical intake port for the practical product.
以实际产品为研究对象，将三维数值模拟方法应用于柴油机螺旋进气道的改进设计中。
Objective To obtain the expiratory resistance in pressure oxygen mask under no overpressure condition with numerical simulation method.
目的用数值模拟的方法获得加压供氧面罩无余压状态下呼气活门的呼气阻力。
Finally, the time dependence influence of the new tunnel's construction to adjacent building was analyzed by numerical simulation method.
最后，采用数值模拟的方法分析了新建隧道的施工对邻近建筑物的时间相关性影响。
The numerical simulation method was used to study the heat transfer and temperature distribution of rolling piece during hot strip rolling.
采用数值模拟方法研究了带钢热轧区轧件传热和温度场分布规律。
There are three main research methods in natural ventilation: simple theory analyse method, experimental method and numerical simulation method.
目前自然通风主要有三种研究方法：简单的理论分析法、实验法和数值模拟法。
The numerical simulation method would provide theoretical basis for optimum design for the pressure cooling system of apple in practical projects.
这种数值计算方法为实际工程苹果差压预冷系统的优化设计提供了理论依据。
Welding temperature field numerical simulation method was able to forecast and reflect the real distribution of whole welding temperature field accurately.
焊接温度场数值模拟可以比较准确预测并反映整体焊接温度场实际分布。
Using numerical simulation method, the retrograde condensation saturation variety and the development effect of the single well dry gas injection is studied.
应用数值模拟技术，研究地层中反凝析液饱和度的变化规律和注干气吞吐技术的开发效果。
This paper presented an evaluation method of carbonate fractured reservoirs, which is a numerical simulation method for the an ciend structural stress field.
本文提出了碳酸盐岩裂缝性储层的一种新评价方法——古构造应力场数值模拟法。
The generalized kink waves of the short pulse equation were studied by the qualitative theory of ordinary differential equations and numerical simulation method.
用微分方程定性理论结合数值模拟方法研究了窄脉冲方程的广义扭结波。
The qualitative theory of ordinary differential equations and numerical simulation method are employed to investigate the kink waves of a nonlinear quartic equation.
用微分方程定性理论结合数值模拟方法研究了一类非线性四阶波动方程的纽结波。
To investigate the rolling control characteristics of canard-controlled missile with fixed-tail, a numerical simulation method based on N-S formulation was conducted.
采用以N-S方程为主控方程的数值模拟方法，进行固定尾翼鸭式气动布局导弹的气动特性和流场数值模拟。
The numerical simulation method based on the strip-yield method has begun to be used in the air space structures, but not used in the fatigue questions in the submarine.
基于带状屈服模型的数字仿真方法在航空航天结构上已经开展运用，但尚未用于潜艇结构疲劳断裂问题。
This dissertation integrates theoretical analysis and numerical simulation method to investigate the ignition transient process of large aspect ratio solid rocket motors.
本文采用理论分析和数值仿真方法对大长径比固体火箭发动机点火瞬态过程进行了系统研究。
The quench model under the condition of conduction cooling system was established and the quench propagation properties were studied by using numerical simulation method.
建立了导热冷却条件下的超导带失超模型，用数值模拟的方法来研究超导带的失超传播特性。
The numerical simulation method is suitable for complex formations, whereas the analytic method or semi-analytic method is superior in less computation and storage costs.
数值模拟方法可用于计算比较复杂的地层。借助解析或半解析方法，可使计算量和存储量降低。
Several optimization schemes of improvement in view of its shortcomings are put forward, and comparisons of the schemes are made by computational numerical simulation method.
针对其不足提出几种优化改进方案，并通过计算机数值仿真计算对比各方案改进效果。
The numerical simulation method is adopted to get the distribution of the soil stress and the displacement variety of some points during the excavating and supporting process.
采用数值模拟方法，得出该基坑开挖支护过程中土体的应力状态分布变化情况及基坑周边某些点的位移变化情况。
The parameters affecting the bulging of the sheet have been studied by finite element numerical simulation method with the law of the parameters affecting the bulging obtained.
本文利用有限元数值模拟方法对影响板料胀形性能的参数进行了研究，并得出了各参数对板料胀形性能影响程度的规律。
By using numerical simulation method, this paper mainly researches the influence of variable intake manifolds on intake flow characteristics and performance for gasoline engine.
本文主要通过数值仿真方法研究了进气管可变技术对汽油机流动特性及其性能的影响。
应用推荐