The numerical simulation analysis was verified by the continuous extrusion experiment.
黄铜合金连续挤压成形实验验证了数值模拟分析结果。
The excellent effect of numerical simulation analysis is proved in actual casting production.
验证了数值模拟分析在铸件形成中的良好作用。
And combined with numerical simulation analysis, the result of the experiment on the model is validated.
最后结合数值模拟分析的方法，对模型试验的结果进行验证。
The influence of detailed configuration of Tubular K-joint on its fatigue behavior is investigated using numerical simulation analysis in this paper.
本文主要针对海洋结构物中的典型局部结构——K型管节点局部结构进行数值模拟分析，考察局部结构型式对其疲劳行为的影响。
This paper briefly introduces constitutes and application of numerical simulation analysis system of gas dynamic performance for marine turbines inlet valve box.
概要介绍了船用汽轮机进汽阀箱气动性能的数值模拟分析系统的构成及其应用。
This paper deals with the numerical simulation analysis of hot extrusion forming process of the Hooke's Joint using three-dimensional elastoplastic finite element method.
采用三维弹塑性有限元法对虎克式万向节热挤压成形过程进行了数值模拟分析。
In order to investigate the shear behavior of crest fixed stressed skin diaphragm, the numerical simulation analysis has been conducted based on the comparing experiments.
为了研究波峰连接的受力蒙皮体的抗剪性能，在已有试验研究的基础上，开展了数值模拟分析。
This paper presents the numerical simulation analysis of a two-dimensional nonlinear mathematical model for heat and moisture transfer in the saturated porous medium under a canal.
本文提出了系数效应滞后的计算方法，数值模拟了饱水渠道冻结时水热迁移的二维非线性模型。
Based on the field loading tests and FEM numerical simulation analysis, the paper probes into the potential bearing capacity of large diameter and super-long bored-cast-place piles.
基于入和没入硬层时有限元数值模拟对比分析和持力层不同时同场地现场对比试验资料分析，对大直径超长灌注桩的承载潜力问题进行了探讨。
The overall study on rock cutting slope with air-raid shelter is presented based on the stabilization design of the slope including the numerical simulation analysis and field tests.
结合对某大厦边坡的加固设计，通过数值模拟稳定性分析和现场观测结果分析，对含有防空洞的岩石开挖边坡进行了较为全面的研究。
To discover the mechanism of progressive failure of rock slope, physical simulation experiment and numerical simulation analysis by means of FLAC software have been done simultaneously.
为了揭示岩体边坡渐进破坏的机理，在对边坡渐进破坏进行物理模拟的同时，应用FLAC软件对边坡渐进破坏过程进行了数值模拟。
Numerical simulation analysis shows that the curvature model has a little sensitivity to damage of structures; it is an effective method to evaluate many damage locations identification of structure.
数值模拟算例分析表明，曲率模态对结构的损伤较敏感，用该方法识别结构的多点损伤位置是行之有效的。
Numerical simulation analysis is made of the paste piping transportation using FLOTRAN CFD calculation hydrodynamic analysis module in ANSYS software based on the paste filling mechanical parameters.
以膏体充填力学参数为基础，运用ANSYS软件中的FLOTRANCFD计算流体动力学分析模块对膏体管道输送进行了数值模拟分析。
Characteristics of wave propagation in grouted rockbolt were investigated with numerical simulation, experimental measurement and theoretical analysis.
用理论分析、数值模拟和实验测试的方法研究了自由锚杆和锚固锚杆中的波传播特性。
The numerical simulation and analysis show that this type of PCF will find extensive applications in dispersion compensation fibers.
数值模拟和分析表明，该光子晶体光纤在色散补偿型光纤方面具有广泛的应用前景。
The formula of the electric field distribution through CST and the numerical simulation, simulation results with theoretical analysis concluded unanimously.
并通过三维电磁场软件进行了数值模拟，模拟结果与理论分析所得结论一致。
Vast numerical simulation tests and analysis of the proposed algorithm and the formulations have been applying to test or practical systems that range in size from 14 to 1047.
本文所用的算法及数学模型在六个节点数从14至1047不等的测试系统及实际系统上进行了大量的数值仿真测试和分析。
This dissertation integrates theoretical analysis and numerical simulation method to investigate the ignition transient process of large aspect ratio solid rocket motors.
本文采用理论分析和数值仿真方法对大长径比固体火箭发动机点火瞬态过程进行了系统研究。
Through the numerical simulation to transient analysis in heating networks, it is consult value and guide significance for the water hammer protection measure.
通过数值模拟方法分析供热管网的瞬变流动工况，对研究供热管网的具体水锤防护措施有参考价值和指导意义。
By theoretical analysis, numerical simulation and experiment research, the Interleaver based on optical all-pass filter technique is investigated.
对基于光全通滤波技术的奇偶交错滤波器进行了理论分析、数值模拟和实验研究工作。
In this paper, it shows how the clearance flow numerical simulation is used to analysis and settle down the practical problem of tubular turbine.
本文阐述了如何应用间隙流动的数值模拟来分析解决贯流式水轮机的一些实际问题。
Theory analysis, numerical simulation and experimental result indicated that the surface electric field of the device was more uniform and the breakdown voltage was increased effectively.
理论分析、数值模拟和实验结果表明，该结构可以使表面电场变得更加均匀，有效提高器件击穿电压。
Meanwhile, the article discussed the application of present theory analysis and numerical simulation method and predicted the trend of the research on the flammable gas explosion.
同时讨论了己有理论分析方法和数值模拟方法的应用，分析了可燃气云爆炸研究的发展趋势。
Numerical simulation and traditional analysis of slope stability are combined to get the slope stability factor the and forecast of developing trend of actuality junkyard slope is offered.
把数值模拟和传统的边坡稳定分析方法结合起来，得出边坡的安全系数，对排土场边坡的发展趋势作出了预测。
Based on theoretical analysis, numerical simulation and filed-testing, the coupling catastrophe mechanism and nonlinear characteristics of coal and gas outbursts are studied in this dissertation.
本文运用理论分析、数值模拟和现场测试研究为一体的方法对煤与瓦斯突出的耦合灾变机制和非线性特征进行了研究。
Numerical calculation and simulation are developed on the basis of theory analysis, numerical result and theory analysis are compared and discussed.
在理论分析的基础上对其进行了数值计算与模拟，并将数值结果与理论分析相比较，进行分析讨论。
Through numerical simulation and analysis, the top coal movement and stress distribution in mechanized top caving mining of thick coal seam is revealed.
通过数值模拟分析，提示了厚煤层综放开采时顶煤运移和应力分布规律。
The accurate theoretic analysis, numerical simulation and measuring test of slip element were very difficult for oil packer systems because of the sharp teeth.
由于封隔器卡瓦的尖齿结构，使卡瓦的理论分析、数值模拟分析和试验测试研究等都非常困难。
The accurate theoretic analysis, numerical simulation and measuring test of slip element were very difficult for oil packer systems because of the sharp teeth.
由于封隔器卡瓦的尖齿结构，使卡瓦的理论分析、数值模拟分析和试验测试研究等都非常困难。
应用推荐