Subsequently use SIMPACK software package and CONTACT numerical procedure to analyse its dynamic performance and contact mechanical performance.
然后用SIMPACK软件及三维非赫兹滚动接触理论对其进行了动力学性能及接触力学性能的分析。
The results of calculation show that the numerical procedure is reasonable and can be expended to predict the turbulent reacting flows in the annular combustor.
计算结果表明计算方法合理，这计算程序进一步扩展，可用来预估环形燃烧室反应流流场。
In simulating the wave in shallow water area, the rationality of numerical procedure with characteristics inlaid scheme will directly affect the numerically simulated results of wave.
在进行浅水区域的海浪模拟时，特征线嵌入格式的数值计算方案是否合理对海浪数值模拟结果产生直接的影响。
By combining the electric-field integral equation with the moment method, an efficient numerical procedure for treating the problems of wire antenna with arbitrary shape can be developed.
将电场积分方程和矩量法相结合，可得到一种处理任意形状天线的高效率数学方法。
A new method and corresponding numerical procedure were introduced to estimate scaling exponents of power-law degree distribution and hierarchical clustering function for complex networks.
提出一种估计复杂网络幂律度分布和层次聚集函数标度指数的新方法，并给出求解这些指数的数值算法。
Compared with theoretical results obtained from the numerical procedure, the algorithm presented in this paper proves to be an efficient method for the performance evaluation of self-timed rings.
通过将本文算法的计算结果和数值计算得到的精确结果进行比较，证明了该算法的正确性和有效性。
Numerical procedure is developed for hydrofoils in steady motion at small angle of attack beneath the free surface. Computational results are compared with that of experiments and other computations.
以在自由表面下作小攻角定常运动的水翼为例进行了计算，计算结果与试验结果和其他计算结果作了比较。
First, you can use a numerical search procedure to propose and evaluate different values of m and b, ultimately settling on estimates producing the least squared error.
第一种方法，可以使用数值搜索过程设定不同的m和b值并对它们求值，最终决定产生最小方差的估计值。
A numerical example is given to demonstrate the design procedure of the decentralized feedback robust controllers, in the light of the method developed in this paper.
根据本文提出的方法，给出了一个数值例子以说明分散反馈鲁棒控制器的设计过程。
Numerical experiments show that the computational procedure is of good stability and convergence.
数值实验表明：计算过程具有较好的稳定性和收敛性。
Document test procedures and results, numerical and graphical data and make recommendations for further changes in process or procedure.
测试程序和结果、数字和图解数据管理，并就工艺或程序的进一步改进提供建议。
In the direct numerical control system of the computer, PID controller is realized by the PID controlling algorithm procedure.
在计算机直接数字控制系统中，PID控制器是通过计算机PID控制算法程序实现的。
As usual, the numerical computation of structural reanalysis is the main task in the optimal procedure of the structures.
在结构优化设计过程中，结构重分析的数值计算常常是主要的工作量。
In this paper, the numerical solution is got through analyzing the direct extrusion procedure theoretically, that can describe the differential equation of metal flowing accurately.
通过对正挤压工序的理论分析得到了数值解，其精确地满足金属流动描述的微分方程。
The numerical simulation procedure by this method is presented on the construction procedure of a pit.
用该方法对基坑施工的工程进行了数值模拟。
A numerical approach based on finite volume method is proposed to study the procedure of coupled heat and moisture transfer in multilayered porous media under nonlinear boundary conditions.
提出了一种基于有限体积法预测非线性边界条件下多层多孔介质内的传热传湿过程的数值分析方法。
The corresponding numerical examples confirm this proposed procedure is accurate and efficient for incremental-iterative type of structural analysis.
相应算例表明所提方法对结构的增量迭代分析是非常有效的和精确的。
Dynamic procedure of deployment of a solar array in the ground environment was simulated by numerical method, where the air influence was regarded as added generalized mass.
将空气的影响视为附加在电池阵上的广义质量，用数值方法模拟了航天器太阳能电池阵在地面试验空气介质中展开时的动力学过程。
Detailed analysis procedure of the active cable-mesh reflector is demonstrated with a single cable in a numerical example.
数值算例中以单索为例给出了索网主动反射面分析的详细过程。
Numerical analyses on underground cavern excavation have shown the effectiveness of the procedure and the advantages of adaptive multi-grid FEM in the simulation of excavation process.
通过算例说明了方法的有效性以及自适应多重网格有限元用于开挖施工过程模拟分析的优越性。
The elastic impact procedure of a beam under lateral impact of ball was simulated by using numerical method in which the contact deformation was considered.
使用数值方法模拟考虑接触变形的梁受到球横向弹性碰撞的全过程。
Base on the nonlinear characteristic of cold ring rolling machine's manufacturing procedure, Design the numerical real-time measurement and online control system of cold ring rolling machine.
冷辗环机数字控制系统设计针对冷辗环加工过程非线性的特点，设计了对冷辗环机加工过程实时测量和在线控制的数字控制系统。
Laborious derivations and the method and procedure of numerical calculations are understood.
繁琐的文字推导和数字计算方法，未作说明。
The numerical simulation of the rupture procedure for the thin plate specimens based on the model proposed is identical with the fracture phenomenon from the experiments.
由于考虑微缺陷分布局部非均匀，得到试样的斜断口形成过程与试验现象完全一致；
Cutter radius offset orders in numerical control (NC) milling manufacturing procedure are expounded and cutter radius offset procedure is analyzed.
阐述了数控铣削加工过程中的刀具半径补偿指令和刀具半径补偿过程。
As the application of 2d temperature field numerical simulation, the cooling procedure of thermoplastic extrusion processing has been analyzed.
作为二维温度场数值模拟的应用，分析了热塑性塑料挤出成型冷却过程中的温度场。
In the paper some techniques in computational procedure are also described, and a few numerical examples are given.
文中还叙述了计算过程中的一些处理技巧，并给出了几个数值例子。
The solution procedure is illustrated with some numerical examples.
一些数值例子说明求解过程。
The theoretical analysis and numerical simulation of temperature distribution in electromagnetic casting procedure.
对电磁铸造过程温度场进行了理论推导及数值分析。
The procedure is based on a finite difference time domain(FDTD) scheme. The numerical results will offer theoretic reference for streamer discharge simulation or geometry optimization of reactor.
数值计算运用时域有限差分（FDTD）法，数值模拟结果为以后的反应器流光放电模拟及结构优化提供依据。
应用推荐